Advertisement
Quick Links
LiFePO4
51.2V 100AH LIFEPO4
BATTERY 3U
MANUAL
Operation and Maintenance
SUPPORT
If you are experiencing technical problems and cannot find
a solution in this manual,please contact ECO-WORTHY for
further assistance.
(EW-SRB48100-BV1.1)
·Call:+1 713-927-9968(US)
+49 693-109-0113(DE)
+44 308-570-0328(UK)
·Web://www.eco-worthy.com/
·E-mail: customer.service@eco-worthy.com
Advertisement
Related Manuals for ECO-WORTHY EW-SRB48100-BV1.1
Summary of Contents for ECO-WORTHY EW-SRB48100-BV1.1
- Page 1 LiFePO4 51.2V 100AH LIFEPO4 BATTERY 3U MANUAL Operation and Maintenance (EW-SRB48100-BV1.1) ·Call:+1 713-927-9968(US) SUPPORT +49 693-109-0113(DE) If you are experiencing technical problems and cannot find +44 308-570-0328(UK) a solution in this manual,please contact ECO-WORTHY for further assistance. ·Web://www.eco-worthy.com/ ·E-mail: customer.service@eco-worthy.com...
-
Page 11: Specification
3.3 Specification 3.3.1 Dimension 3.3.2 Parameters Items EW-SRB48100-BV1.1 Rated voltage 51.2V Max. voltage range 40~58.4V Charge voltage 58.4V Low voltage cut-off 40.0V Nominal energy 5.12KWh Usable energy 5.12KWh Nominal capacity 100Ah... - Page 12 Dimension 22.09*19.02*5.24in/56.1*48.3*13.3cm Weight 94.8lb/43kg Standard charge current Max. charge current 100A Standard discharge current Max. discharge current Communication port RS485 /CAN/RS232 Max. parallel number 15pcs Operating temperature Charge: 0~55 Discharge: -20~55 -20~25 Less than 1 year Storage temperature 20~40 less than 3 months Environment at the 60±25%R.H.
- Page 13 Parameter Condition PCB Temperature Protection Cell Balance Temperature Accuracy Cell Voltage Accuracy For Cells Current Accuracy Storage/Transport Power Consumption Sleeping Charging/Discharging Communication Ports Bluetooth&Wifi Signal Distance NOTICE The optimum operating temperature range is from 15°C to 30°C. Frequent exposure to the harsh temperatures may worsen the performance of the battery pack and its cycle life.
- Page 14 Items Usage description Remark For handling, intallation and Handles disasembly of battery Used to connect battery with ground Grounding Used to connect the inverter/charger Negative terminal Used to connect the inverter/charger Positive terminal Over-current protection 125A breaker Power switch Used to Power on/off battery Indicates whether the battery is ON/OFF indicator turned on or off...
- Page 15 Explain...
- Page 16 �.�.�.� Communication Interface Pin Diagram 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 � � � � � � RS485-1 RS232 RS485...
- Page 17 3.3.3.3 Parallel Wiring Instructions Example of parallel Example of automatic address dialing method allocation and parallel operation 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 RS485 RS485-1...
- Page 18 3.3.3.4 LED Description LED Indicator Light Colors SOC(LED1~6) ON/OFF LED1 LED2 LED3 LED4 LED5 LED6 Color Green Green Green Green Green Green Green Green LED Indicator Light Status Display The light stays on continuously. The light stays off continuously. Slow Flash The indicator turns on for 0.25S and off for 3.75S.
- Page 19 LED Indicator Light Description Event LED1 LED2 LED3 LED4 LED5 LED6 Indicator lights Sleep are all off Slow Flash Normal Indicate according to SOC status Medium Slow Flash Warning Flash Normal Indicate according to SOC status Medium Warning Flash Over-voltage Stop charging protection Over-cur-...
- Page 20 3.4 Protection Items Description Remark The BMS will stop charging if any cell or PACK Charge End voltage reaches the protection value and it will be Cell/ auto-released only when both Pack and cell voltage PACK back to the release voltage range or there is high-voltage efficient discharge current.
-
Page 21: Installation
CAUTION Please re-charge the battery via solar, grid/generator or other energy source within 24h if the battery is over-discharged. NOTICE Manually short-circuit and reverse the battery will void the IV.Installation 4.1 Preparation 4.1.1 Safety Compliance The system installation must be finished by qualified person(s). During the whole installation process, please strictly follow the local safety regulations and related operating procedures. - Page 22 4.1.3 Tools Tools Screwdriver (slot, cross) Multi-meter Wrench Clamp meters Diagonal pliers Insulating tape Needle nose pliers Thermometer (observe the installation environment) Clamping pliers Anti-static bracelet Wire stripper Cable ties 4.2 Inspection 4.2.1 Unpack precautions * Please load and unload it in accordance with the specified requirements to prevent sun and rain when you receive the equip ment.
- Page 23 Optional materials Type Details Qty. 200mm A: Battery to Battery positive cable(2AWG 200mm RED) Version II(CAN): B: Battery to Battery negetive cable(2AWG 200mm BLACK) -21-...
- Page 24 4.2.2 External cable kits Cables connected to inverter or junction box belong to External Cable kits. It is NOT included in battery carton. Customers need buy it separately, and the information are as below. Type Detail Qty. C: Battery to Inverter positive cable(2/0AWG 2000mm RED) D: Battery to Inverter negetive cable(2/0AWG 2000mm BLACK) NOTICE Keep the unused cable pins NULL to avoid affecting the closed...
- Page 26 Insert the Battery into the Rack Slot NOTICE For any other installations, please avoid the battery directly contacting the ground and avoid of high salinity, humidity to prevent the product from rusting and corrosion. -24-...
- Page 27 Connect the batteries in parallel Warning: First, ensure that the air switch is in the off position on the left, and the POWER switch is off. ① Use the grounding wire included in the packaging to connect the casings of all batteries in series. ②...
- Page 28 Turn on the battery ① Open 125A Circuit Breaker ② Press the POWER button Use the mobile app to set the communication protocol ① Scan the QR code to download the software ② Open the software and search for nearby devices (please turn on Bluetooth on your phone and grant Bluetooth permissions) ③...
- Page 29 Battery-inverter power connection Note: Please turn off the POWER button and the breaker before connecting the cables. Use the cables required by the inverter to connect the battery pack to the BAT input terminal of the inverter. Battery-inverter communication connection Use a standard Ethernet cable to connect the battery's RS485-1 or CAN port to the BMS communication port of the inverter.
- Page 30 NOTICE The maximum communication cable length is required to be less than 15m between inverter/charger and battery. The maximum power cable length is suggested to be less than 10m between inverter/charger and battery. CAUTION The maximum tolerance current of each power cable and terminal is 125A, and 100A for continuously is suggested.
- Page 31 V. Caution CAUTION: Never position the battery upside down or face down!
- Page 34 �) Customer service email: E-mail: customer. service@eco-worthy.com �) Company address: USA/Germany Address(US): ����� W Sam Houston Pkwy N, Suite ���, Houston, TX ����� Address(DE): ECO-Worthy Europe GmbH Otto-Hahn-Str. �� ����� Fried- richsdorf - Köppern Germany �) Customer service telephone numbers: Tel(DE): +��...
- Page 35 ECO-WO RTHY...
Need help?
Do you have a question about the EW-SRB48100-BV1.1 and is the answer not in the manual?
Questions and answers