Advertisement
Quick Links
Thank you for purchasing the RoamSat from RPM, Inc.
For new Starlink users please go to
www.Starlink.com/ac6vate
and enter the Starlink SN "KITXXXXXXXX"
provided with your RoamSat unit. Enter your informa6on, select a monthly plan and ac6vate your dish.
Note: Typically only takes 15-30 minutes to become ac6ve. For exis6ng Starlink users, make sure your
Starlink plan is ac6ve. Once ac6vated there is NO setup or configura6on required. We have already
done that for you with the user specific creden6als listed below on your instruc6ons. While the Starlink
app is a nice feature it is not required to connect to your unit. Simply turn the Roamsat power on, open
your device and connect to the WiFi. From there you should be online and able to perform a speed test
via the Starlink app or something like SpeedTest.net
NOTE: In order to use your RoamSat, the device must be outdoors free of any obstruc6ons and
obstacles facing directly up towards the sky. Do not aSempt to operate indoors!
CUSTOMER: Your Name Here
KIT NUMBER: ____KITXXXXXXXXX______
Sample QR code below
Advertisement
Summary of Contents for RPM RoamSat Gen2
- Page 1 Thank you for purchasing the RoamSat from RPM, Inc. For new Starlink users please go to www.Starlink.com/ac6vate and enter the Starlink SN “KITXXXXXXXX” provided with your RoamSat unit. Enter your informa6on, select a monthly plan and ac6vate your dish. Note: Typically only takes 15-30 minutes to become ac6ve. For exis6ng Starlink users, make sure your Starlink plan is ac6ve.
-
Page 2: Opera&On
Opera&on: Your RoamSat unit comes with a 30ah Lifepo4 baSery providing 8-10 hours of use on a single charge (Gen2 Antenna). The unit ships with only a par6al charge (enough to test, etc) but should be fully charged before opera6on. To turn the unit “ON” using baSery power, simply turn the main baSery switch on. - Page 3 OpDon 2 - 110/220v SaDator smart charger / power supply. Plug in the cycle sa6ator into the wall and insert the XLR charging plug into the RoamSat charging port. Note: the cord only goes in one way so gently twist to align the plug and do not force it! To power the RoamSat using 110/220v power, the On/off...
- Page 4 in the auxiliary cable with cigareSe adapter into the 110v power supply. For all other 6mes when the baSery is installed, you can power with the provided 110/220v Sa6ator charger. OpDon 6: OpDonal 12v Charger This op6onal charger allows you to charge your RoamSat baSery with 12v DC power (another baSery), whereas the standard charger is only110-240v AC power.
- Page 5 Basic Trouble ShooDng: In the event you need to do some basic troubleshoo6ng on your own, here are some sugges6ons. The most common FAQ we receive is “My unit will not charge even though the cable is plugged in, it says “Connect to Ba:ery”.
Need help?
Do you have a question about the RoamSat Gen2 and is the answer not in the manual?
Questions and answers