Page 1
MALONE *ATTENTION CUSTOMERS* Thank you for your recent purchase of a Malone trailer. Please inspect all parts and hardware bags prior to assembly. If you encounter any missing components please contact us at: Email:technical@maloneautoracks.com Phone:(207) 774 - 9100 X215 Business Hours: Monday-Friday...
Page 2
Thank you for your purchase of a Malone Product. In order to be eligible for the Malone Warranty program, we ask that you contact us by email or online at one of the following: With-in 30 days of purchase. You can also mail this letter back to the address at the bottom.
Page 3
MPG457 MPG494 Malone MicroSport Trailer Retractable Tongue Kit Model MPG457 Instructions MPG494 Take a few moments and read through these instructions to familiarize yourself Take a few moments and read through these instructions to familiarize yourself with the step by step assembly process before you begin turning wrenches.
Page 4
MPG457 MPG494 Assembly: Assembly: 1. Cut the left and right tail light wires, make your cuts about half way 1. Begin by unplugging the wire between the middle cross member harness at the back of the tongue. and the front load bar.
Page 5
MPG494 6. With its threaded side to the tongue. Then slide the short tongue back tongue.
Page 6
11. Install the two new 1/2” locknuts and MPG494 tighten fi rmly. Don’t crush the frame! 15. Tuck the rear end of the 10. Install the two new 1/2” locknuts and wiring harness into the end of the hand tighten only.
3) Insert the hitch pin,install the ring clip. 4) Connect the wiring connector. Storing the Retracted Trailer: With the tongue retracted, the Malone MicroSport Trailer can be stored in a much smaller space either horizontally or vertically. When stored vertically always lean the trailer against a stationary surface.
Need help?
Do you have a question about the MPG494 and is the answer not in the manual?
Questions and answers