Page 11
Instruction Manual Ver 1.00 ES-125 Portable Power Station 1000...
Page 12
Thank you for purchasing a collaboration product with Snow Peak. This product is a portable power supply. For your safety, read the following instructions carefully before use. Also, keep the manual in a safe place for future reference. If you do not understand any part of these instructions or if you find any problems with the product, please stop using it immediately and contact Anker Customer Support.
Page 13
Safety Precautions: Before use, please read thoroughly to ensure safety and avoid accidents. DANGER / Misuse could easily result in a serious accident or death. ●The supplied cables are not universally compatible. Use only with this product. Do not use the cables with any other product.
Page 14
●Do not block this product’s vent hole with any object. It is dangerous. Leave a clear space of at least 5 cm around this product. ●Do not use this product in a damp place or where there is moisture or water. Do not submerge this product in water.
Page 15
Instructions for Use Charging This Product Charging from an Outlet (Normal mode, 1000W max) Connect the AC charging cable to a power outlet to connect power to this product. Note: When battery level falls below 1%, the LCD battery level indicator blinks to indicate that the battery needs to be charged.
Page 16
Supplying power to devices. Supplying power from the AC output port. Press the AC output button and connect the device to the AC output port. The AC output port automatically identifies if the plug is inserted. If the plug is not detected for 15 minutes, the AC output port is automatically turned off.
Page 17
Connecting with an expansion battery. The capacity can be doubled to 2112Wh by connecting an expansion battery to this product. For details, read the instruction manual for Anker SOLIX BP1000 Expansion Battery (1056Wh). Operation from Anker app. You can use the Anker app to control this product remotely. 1.Download the Anker app from App Store (iOS device) or Google Play (Android device), or scan the QR code.
Troubleshooting Trouble Cause Solution After connecting the supplied AC charging cable to the Display does not turn on even ・No battery remained. main unit, connect to a power outlet and charge this when the main power button is ・Low battery. product overnight or longer.
Page 19
Frequently Asked Questions Q1: What is the maximum output of the AC output port? The AC output port can supply a rated power of up to 1500W to a connected device. Q2: What solar panels can charge this product? Any 11-60V solar charger with an XT60 female connector can be used with this product. This product supports up to 10A for 11-32V solar chargers and up to 12.5A for 32-60V solar chargers.
Need help?
Do you have a question about the Portable Power Station 1000 and is the answer not in the manual?
Questions and answers