CeoTronics CT-DECT Multi M7 Operating Manual page 24

8 CT-WirelessPTT MIL
8.2 Switching on the WirelessPTT function
To prepare the connection with a CT-WirelessPTT MIL, the corresponding function must be
switched on in the CT-DECT Multi M7.
To do this, use the WIRELESS PTT menu item:
BASE profile
DECT
BLUETOOTH
WIRELESS PTT
ON / OFF
If there is no active connection to a WirelessPTT when the WirelessPTT function is activated,
the WT symbol flashes on the display.
WT
The WirelessPTT function can be switched off to disconnect the CT-DECT Multi M7 from the
CT-WirelessPTT MIL without cancelling the pairing.
ERFOLGREI
Klicken
24 / 44
flashes
Schritt 3 - Ende des Einlernprozesses
dok7059-en-00-1024
ERFOLGRE EINLERNEN
Klicken Klicken zum Beenden