13. DAILY USE - WASHING & DRYING..............39 14. DAILY USE - DRYING ONLY................40 15. FLUFF IN THE FABRICS..................41 16. HINTS AND TIPS....................42 17. CARE AND CLEANING..................44 18. TROUBLESHOOTING..................50 19. CONSUMPTION VALUES................55 20. QUICK GUIDE....................58 21. ENVIRONMENTAL CONCERNS..............60 My AEG Care app...
ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 4
Children between 3 and 8 years of age and persons • with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
Page 5
ENGLISH Do not install the appliance behind a lockable door, a • sliding door or a door with a hinge on the opposite side, that would prevent the appliance door from being fully open. Connect the mains plug to the mains socket only at •...
ENGLISH than 0°C or where it is exposed to the • Do not cause damage to the water weather. hoses. • Always keep the appliance vertical • Before connection to new pipes, pipes when it is being moved. not used for a long time, where repair •...
• Do not let hot items to touch the such as detergent dispensers. Please plastic parts of the appliance. note that some of these spare parts • Remove a detergent ball (if used) are only available to professional before starting a drying programme.
Use the delicate fragrance exclusively The steam relaxes the fibres and developed by AEG to add a pleasant reduces fabric creasing. Ironing will feeling of "just-washed" garment to be easier! the removing odours and wrinkles •...
4. TECHNICAL DATA Dimension Width/ Height/ Total 59.7 cm /84.7 cm /66.0 cm depth Electrical connection Voltage 230 V Overall power 2100 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles IPX4 and moisture ensured by the protective cover, ex‐...
Page 11
ENGLISH 4. Open the door and remove the 8. Pull up the appliance in vertical polystyrene piece from the door seal position. and all the items from the drum. 5. Carefully put the appliance down on 9. Remove the power supply cable and its rear side.
If you install the appliance on a plinth WARNING! that is not an accessory supplied by Do not put cardboard, wood AEG, secure the appliance with the fixing or equivalent materials plates. This spare part is available in web below the appliance feet to shop or from authorised dealer.
ENGLISH 2. Position it toward left or right The red sector in the window «A» shows depending on the position of the this fault. water tap. 45º 45º 20º 20º If this occurs, close the water tap and contact the authorized service centre to replace the hose.
Page 14
5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. Make sure that the drain hose end is not immersed in the water.
ENGLISH The power supply cable must be easily The manufacturer does not accept any accessible after installing the appliance. responsibility for damage or injury through failure to comply with the above For any electrical work required to install safety precaution. this appliance, contact our Authorised Service Centre.
Page 16
6.2 Display Washing phase indicator. It flashes during pre-wash and wash phase. Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. Drying phase indicator. Steam phase indicator. Anti-crease phase indicator (available via APP only).
Page 17
ENGLISH The digital indicator can show: • Programme duration (e. g. , washing and/or drying phase). The time shown when the programme is set could not correspond to effective duration and change af‐ ter ProSense phase. • Maximum load. • Finish in time (e.
Pre-wash indicator. Stain indicator. Extra Spülen indicator. 7. DIAL AND BUTTONS 7.1 Ein/Aus 7.4 Introduction Pressing this button for a few seconds The options/functions are allows to activate or deactivate the not selectable with all appliance. Two different tunes sound washing programmes.
ENGLISH terminate. The programme end can be If you set a programme via postponed by one 1 hour every button App and it does not match touch until 24 hours maximum. with the knob position, The display shows the normal text appears alternating with programme duration alternatively with programme duration.
Page 20
When the display shows the indicators performs the only draining phase of the selected washing programme. Set , the appliance does not heat this option for very delicate fabrics. the water. The rinses phase uses more water for some washing programmes 7.11 Schleudern...
Page 21
On the display the relevant dryness The fragrance ( AEG Steam indicator goes on: Fragrance) The AEG Steam Fragrance allows you to • Iron dry: laundry to be refresh even your delicate clothes, ironed. removing wrinkles and adding freshness...
AEG. By refreshing your • Tumble dry the garments treated with garments with steam, rather than running fragrance. Its benefit would full wash cycles, you will keep your evaporate. clothes looking and feeling new longer. • Use the fragrance with different You can even safely use the fragrance purposes than those here described.
10.1 My AEG Care app and additional hidden programmes My AEG Care app provides you with a wide choice of additional hidden programmes. Connect the appliance to My AEG Care and you will be able to choose the programme that suits your needs most.
10.2 Programme Chart Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range 1600 rpm Eco 40-60 (Wash 1600 rpm - 10.0 kg only mode) 400 rpm 40 °C White cotton and fast-coloured cotton.
Page 25
ENGLISH Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range Do not use fabric softener Outdoor and make sure that there is no softener residue in 30 °C the detergent dispenser. 40 °C - Cold Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell 1200 rpm...
Page 26
Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range White cotton items. This high-perform‐ ance wash programme combined with Hygiëne steam vapour, removes more than 60 °C 99,99% of bacteria and viruses keeping the temperature above 60°C throughout...
Page 28
Options Fertig In ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) If you set the No Spin option, the appliance performs draining only. 2) This option is not available with temperature lower than 40 °C.
ENGLISH 10.3 Woolmark Wool Care - provided that the products are washed according to the instructions Blue on the garment label and those issued by the manufacturer of this washing machine. M1361. • The wool drying cycle of this machine has been tested and approved by The Woolmark Company.
Dryness Level Type of fabric Load Cottons and Linen up to 6.0 kg (bathrobes, bath towels, etc) Synthetics and mixed fab‐ up to 4.0 kg Cupboard Dry rics For items to be stored (jumpers, blouses, under‐ wear, household and bed lin‐...
ENGLISH Dryness Level Type of fabric Load (kg) Suggested Spin speed duration (rpm) (mins) Synthetics and mixed fabrics 135 - 145 (jumpers, blouses, underwear, house‐ 1200 hold and bed linen) 40 - 50 1200 Delicates 140 - 160 (acrylics, viscose and delicate mixed 1200 fabrics) 70 - 80...
Page 32
'QR device or scan QR code ( SCANNING... code on rating plate' paragraph ). 2. Download and install the My AEG Care App. 3. Make sure you started a Wi-fi connection in the appliance. If not, read the next paragraph 'Configuring Mod.
Page 33
The access point will be open for about 3 possible to start a washing minutes. programme remotely. This 5. Configure the My AEG Care app on function is deactivated when your smart device and follow the door is open. instructions to connect the appliance to your Wi-Fi network.
11.5 Over-the-air update buttons or turn the knob to return to normal use. The App may propose an update for your appliance. 11.6 Wi-Fi Always On The update is accepted via App only. The Wi-Fi Always On function is If a programme is running, the App available in the App.
Page 35
ENGLISH 3. Close the door. Make sure that no laundry stays between the seal and the door. There is a risk of water - Compartment for washing phase leakage or damage to the laundry. (powder detergent only). Make sure that the Pods® option is deactivated when using this compartment.
4. Pour fabric softener in the compartment 5. Close the detergent dispenser. 12.5 Starting a programme Touch the Start/Pause button to start the programme. The related indicator stops flashing and stays on. In the display, the indicator of the operating phase starts flashing.
ENGLISH 12.7 Starting a programme The washing programme continues. with the Fertig In option 12.10 Cancelling a running 1. Touch this repeatedly until the programme display shows the desired time within 1. Press the Ein/Aus button to cancel the programme should end. The the programme and to deactivate the indicator comes on.
• The door stays locked. via App. • You must drain the water to open the door: 12.12 End of the programme 1. If necessary, touch the Schleudern button to decrease the spin speed When the programme has finished, the proposed by the appliance.
ENGLISH If the Wi-Fi Always On function is active, only the indicator goes on and off intermittently. 13. DAILY USE - WASHING & DRYING When drying a large laundry WARNING! load, make sure that the Refer to Safety chapters. garments are not rolled up and that are uniformly This appliance is an distributed in the drum.
13.3 Washing and Timed 13.4 At the end of the drying Drying programme You can also exclude the automatic • The appliance stops automatically. drying mode, and choose a drying time • The acoustic signals operate (if they manually: are active).
ENGLISH The minimum timed drying is 10 minutes. Each time you tap on this button the time Iron dry: for cotton value increases by 5 minutes. The items; display shows the set new time value. 2. Touch the Start/Pause button to start the programme.
To remove the fluff inside the drum, • Touch the Start/Pause button to proceed as follows: start the programme. • Empty the drum. • Clean the drum, the gasket and the door with a wet cloth. • Set the Maschinenreinigung programme and the TROCKNEN mode .
ENGLISH Excessive detergent may cause: • sudsing, • reduced washing effect, • inadequate rinsing, • a greater impact for the environment. 16.4 Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips: 16.3 Detergent type and quantity •...
16.7 Items not suitable for • type of laundry • weight of the load drying 16.10 Additional drying Do not set a drying programme for this laundry: If, at the end of the drying programme, • Synthetic curtains. the laundry is still damp, set a short •...
ENGLISH 17.4 Descaling Remove fluff inside Twice a month If the water hardness in your the drum area is high or moderate, we recommend that you use a Clean detergent dis‐ Every two months water descaling product for penser washing machines. Clean drain pump Twice a year Regularly examine the drum to check for...
Clean it when needed, using ammonia cream cleanser agent without scratching 3. Lift up the top cover of the the seal surface. compartments to remove it. Always obey the instructions that you find on the packaging of the product.
ENGLISH CAUTION! Press the bottom cover as indicated in the picture. Make sure that it is closed properly. CLICK 6. Turn the dispenser up side down and open the bottom cover as indicated in the picture. 9. Reassembly the drawer as follows: a.
Page 48
Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code WARNING! •...
ENGLISH occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter. 11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages.
17.11 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket.
Page 51
ENGLISH With some problems, the display shows an alarm code and the Start/Pause button may flash continuously: If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Start/Pause button until the indicator stops flashing (see the picture below).
Page 52
• The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No com‐ • If the alarm code appears again, contact the Authorised Serv‐ munication between ice Centre.
Page 53
ENGLISH Problem Possible solution • Make sure that a washing programme that ends with water in tub, has not been selected. • Make sure that the washing programme is finished. • Set the drain or the spin programme if there is water in the drum.
Page 54
Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes "Installation instruction". an unusual noise and • Make sure that the packaging and/or the transit bolts are re‐ vibrates. moved. Refer to "Installation instruction".
ENGLISH After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. The necessary data for the service centre are on the rating plate. 18.2 Emergency door To open the door, proceed as follows: opening 1.
Page 56
The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
Page 57
ENGLISH Wash and dry cycle Eco 40-60 pro‐ gramme and Litres hh:mm °C Cupboard dry level Full load 3.795 87.0 07:45 0.00 26.0 1551 Half load 1.980 58.0 05:00 0.00 24.0 1551 1) Maximum spin speed. Power consumption in different modes Delay start Networked Off (W)
Programme Litres hh:mm °C Wolle 0.250 65.0 01:05 30.00 30.0 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. 4) It also performs as quick washing cycle for lightly soiled laundry.
ENGLISH • Push the Ein/Aus button to turn the appliance off. 20.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display. 20.3 Programmes Programmes Load Product description Low energy cycle for cottons. Decreases tem‐ 10.0 kg perature and extends time to reach good Eco 40-60...
Programmes Load Product description White cotton items. This programme removes 10.0 kg more than 99,99% of bacteria and viruses Hygiëne It also ensure a proper reduction of allergens. All fabrics, except woollens and very delicate 10.0 kg fabrics. Programme for rinsing and spinning.
Page 64
My AEG Care app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)
Need help?
Do you have a question about the LWR8E80609 and is the answer not in the manual?
Questions and answers