1. Manuals
  2. Brands
  3. ROWAN ELECTRIC APPLIANCE Manuals
  4. Coffee Maker
  5. CM5020B-UL
  6. Operating manual

ROWAN ELECTRIC APPLIANCE CM5020B-UL Operating Manual

Hide thumbs Also See for CM5020B-UL:
Table of Contents

Advertisement

Quick Links

Download this manual
IMPORTANT INSTRUCTIONS
AND OPERATING MANUAL
ESPRESSO MACHINE
Item No.:CM8050
Model NO.: CM5020B-UL
THANK YOU FOR CHOOSING OUR ESPRESSO MACHINE
PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATING!
If you have questions about the product such as missing parts,damaged products,
product assembling and operation etc., please contactus via Amazon Message or
customer service phone:213-4467172 or 661-4358826.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CM5020B-UL and is the answer not in the manual?

Questions and answers

Related Manuals for ROWAN ELECTRIC APPLIANCE CM5020B-UL

Summary of Contents for ROWAN ELECTRIC APPLIANCE CM5020B-UL

  • Page 1 IMPORTANT INSTRUCTIONS AND OPERATING MANUAL ESPRESSO MACHINE Item No.:CM8050 Model NO.: CM5020B-UL THANK YOU FOR CHOOSING OUR ESPRESSO MACHINE PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATING! If you have questions about the product such as missing parts,damaged products, product assembling and operation etc., please contactus via Amazon Message or...

  • Page 2: Important Safeguards

    ⚠ IMPORTANT SAFEGUARDS Before using the electrical appliance, the following basic precautions should always be followed including the following: 1. Read all instructions. 2. Before using, check that the voltage of wall outlet corresponds to rated voltage marked on the rating plate. 3.
  • Page 3 hold the plug, but never pull the cord. 13. Do not use appliance for other than intended use and place it in a dry environment. 14. Be careful not to get burned by the steam. 15. The temperature for operating or storing the coffee machine shall be higher than 0℃.

  • Page 4: High Temperature

    environments; – bed and breakfast type environments. 24. Save these instructions. ⚠ Warning: pressure In order to prevent hot steam and hot water from scalding the body or causing other personal injuries, and to prevent damage to this product, when the machine brews coffee or foams, do not remove the water tank or funnel.

  • Page 5: Know Your Coffee Machine

    KNOW YOUR COFFEE MACHINE 1.Double-cup filter 11.Bean box cover 2.Cleaning pin 12.Bean box 3.Cleaning brush 13.Pressure gauge 4.Tool box 14.Funnel bracket 5.Button 15.Water tank cover 6.Single-cup filter 16.Water tank 7.Pressurized funnel 17.Knob 8.Drip plate 18.Milk cup 9.Floater 19.Steam tube 10.Drip tray 20.Coffee tamper...

  • Page 6: Control Panel

    PARTS Bean box components Water tray componen Water tank components Coffee Machine High pressure funnel components Two cups of single-layer filte Tool Box （ Cleaning needle*1 ， cleaning brush*1 ） Milk cup Tamper Control panel Bean box Pressure gauge Single-cup button Grind button Double-cup button Power button...

  • Page 7: Before The First Use

    BEFORE THE FIRST USE Before the first use or the machine has not been used for a long time, you should follow below steps to rinse and warm up the internal pipes of the machine. 1. Check and ensure that all accessories are complete and not damaged. 2.
  • Page 8 Choose the right coffee powder Coffee powder The coffee should be freshly ground and subjected to deep roasting. You may need to use French or espresso roasted coffee powder for espresso coffee. Pre-ground coffee powder can only keep the aroma for 7 to 8 days unless it is stored in a sealed container, and place it in a cool place.
  • Page 9 final coffee taste and effect, please do not put too much coffee beans in the bean box. Notes: In order to obtain a uniform and consistent coffee powder, be sure to adjust the grinding degree according to the type and quality of coffee beans to obtain a cup of high-quality coffee.
  • Page 10 turn the funnel counterclockwise to lock it. Put a coffee cup on the drip plate, press the machine starts to brew a single-cup of coffee. When the set coffee dose is reached (about 30ML), the machine will stop working automatically and enter into the standby mode.
  • Page 11 2. Hold and press “ ”, “ “ will restore coffee dose of single and double-cup to ” and ” factory settings. When extracting coffee, make sure that the funnel is turned counterclockwise into the correct position as shown in the Figure below. Boil hot water: In the standby mode, turn the knob to hot water indicator , the machine enters into hot water mode, at that time, the hot water indicator and steam...
  • Page 12 double-cup indicator “ will extinguish, which means the steam function is warming up. ” Wait until steam indicator lights up steadily, the steam function is finished preheating, and the machine enters into the steam mode. NOTES: 1. The steam function will generate high-temperature steam, please pay attention to avoid scalding when using it.
  • Page 13 are as follows: Fig. 2: Align the positions in red Fig. 1: Install the cutter head (2) circles in the Figure, and press it and tighten it clockwise, then down, rotate it clockwise and install the bean box (1) and screw install it into the machine.
  • Page 14 not put too many coffee beans in the bean box. 3. As shown in Fig. 5, put the funnel with single-cup filter or double-cup filter into the powder receiving bracket, as shown in Fig. 5. Fig. 5 4. Press “ to start grinding.
  • Page 15 powder. When the edge of tamper align to Tamp the coffee powder edge of funnel, powder amount is downwards appropriate 7. Turn the funnel counterclockwise into the funnel bracket, and select the corresponding SINGLE or DOUBLE button according to the filter size. NOTES: 1.
  • Page 16 pressing the GRIND button “ ”, the indicator of Grind button will flash quickly and the grinder will start working. When it runs to the time you want, release the the GRIND button “ ”, the buzzer will sound, the machine will record the time. Next time you grind, the grinder will run for the set time.

  • Page 17: Cleaning Pin

    Cleaning pin The cleaning pin is used for cleaning steam spout and filters. The thicker pin is for cleaning steam tube (Fig. 7), and thinner one is for filters (Fig.8). Clean the steam tube Clean the filters with with thicker pin thinner pin Fig.8 Fig.7...
  • Page 18 Fig.9 Fig.8 The rear end of cleaning brush could be used to detach filter from funnel as Fig.11 Fig.10 V. Clean the grinder The grinder may be influenced by coffee beans and some other factors during operation to make the powder outlet channel be blocked. Please clean the powder outlet channel in time when the following conditions occur: 1.
  • Page 19 3. When the coffee grinder is used to grind fine coffee powder, please clean the powder channel in time. 4. The machine is equipped with an anti-static system which could prevent coffee powder from spreading outside in grinding. When coffee powder floats out from funnel, please use the cleaning brush to clean the the powder entrance area in time.

  • Page 20: Descaling Instructions

    NOTE: When starting the descaling program, please make sure: 1. Ensure that there is at least 1 liter of water in the water tank. 2. Empty the drip tray and install it in place. 3. Turn on the machine and make it stay in standby mode. 4.
  • Page 21 Add the solution to the water tank (choose one of three methods) A. Fill the water tank with 1 liter of water. Add the descaling tablets and wait for the descaling tablets to dissolve. B. Add half a cup of liquid descaling agent into the water tank, then add 1 liter warm water to allow the solution to mix thoroughly.
  • Page 22 2. In standby mode, keep pressing the buttons of “ ” and “ , the machine will start the ” descaling process. When the indicator of Power button turns on and the descaling indicator flashes quickly, follow the steps as below. Step 1: Start the descaling cycle Turn the knob to “...
  • Page 23 When hot water stops coming out from brewing head and steam tube, the descaling is complete. Descaling cycle completed The indicator stops illuminating and knob indicator “ ” starts flashing, which means the machine completes this step. Turn the knob to the “ ” position, the indicators of all buttons will illuminate. When the descaling cycle is finished, the buzzer will sound and the indicator of “...

  • Page 24: Cleaning And Maintenance

    CLEANING AND MAINTENANCE ⚠ WARNING Please unplug before cleaning to allow the coffee machine to cool down sufficiently to prevent scalding. Do not immerse the coffee machine or the power cord plug in water or other liquids to avoid danger. 1.
  • Page 25 The drip tray is full installed in place, and the drip tray is empty. If the issue is not solved, please don’t disassemble the machine on your own, but send it to local authorized maintenance center for reparation. You will hear a ticking This is a normal sound after starting the phenomenon and the...
  • Page 26 coffee. No steam The steam function is not The machine can only preheated; produce steam after the The steam nozzle is machine is preheated in blocked. steam mode; the machine needs to be descaled and use a cleaning needle to clean the steam nozzle.
  • Page 27 213-4467172 661-4358826 (8:30am - 5:30pm P .S.T.) SE REQUIERE PRUEBA DE COMPRA CON FECHA PARA SERVICIO BAJO GARANTÍA. Address: ROWAN ELECTRIC APPLIANCE LLC 28407 Ascent Way, Santa Clarita, CA 91350 Phone: 213-4467172 or 661-4358826...

This manual is also suitable for:

Cm8050

Table of Contents