Using The Ac Power Adapter; Connections; Playing One Dvd On Both Units A And B; Using As A Display For A Game System - RCA DRC6289 User Manual

B. Using the AC power Adapter
The included AC power adapter operates on AC between 100V-120V.
• The supplied AC power adapter is suitable for use on AC mains supplies of 100-120 Volts AC and should
only be connected to a mains supply within these parameters.
Cautions:
• Turn off the unit before unplugging the AC power adapter to avoid damage to the unit.
• When the unit is not going to be used for a long time, disconnect the AC power adapter from
the AC outlet.
• The AC power adapter included with this unit is for its use only. Do not use it with other
equipment.
IMPORTANT
• Be sure to use the unit close to the wall outlet and make it is easily accessible. If a malfunction occurs,
disconnect the plug from the wall outlet at once.
• When the AC power adapter is plugged in, the apparatus is not completely disconnected from the main
power source, even when the unit is turned off.
6
AC adapter
2
To AC wall
outlet
1
To DC IN
9V-12V jacks

Connections

Playing one DVD on both Units A and B

You can watch the same DVD simultaneously on unit
A and B.
Watching same DVD on both Units
1. Connect the unit A and B using the included
Audio/Video cable.
2. Turn on both units. Slide the DVD/AV IN
switch on one unit (unit A or B) to DVD and
place a disc on it, then slide the DVD/AV IN
switch on the other unit to AV IN.
3. Play the DVD - the other unit will display the
DVD at the same time.
Using as a display for a Game System/Video Equipment
You can connect game systems or other video equipment for playback using the unit.
Watching video equipment
1. Connect the video equipment to the unit
using an Audio/Video cable.
2. Turn on the unit. Slide the DVD/AV IN switch
to AV IN.
3. Turn on the video equipment and follow the
instructions provided with it for playback.
Note:
• Make sure to use the correct Audio/Video
cable. Connecting the plugs incorrectly may
cause a weak signal.
• If you have a mono VCR, the volume level
from the speakers will be low.

Connecting to a TV

If your TV has Audio/Video inputs, you
can connect the unit to your TV using the
included Audio/Video cable.
Watching a DVD on your TV
1. Connect your TV to the DVD player using an
Audio/Video cable.
2. Turn on the unit. Slide the DVD / AV IN switch
to DVD.
3. Turn on the TV and follow the instructions
included with the TV for display of content
from other sources.
Note:
• Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak
signal.
• If your TV does not have Audio/Video inputs, you will need to purchase an RF modulator (sold separately)
and follow the instructions included with it to connect the unit to your TV.
e.g.
Unit A - Unit B -
right side right side
AUDIO VIDEO
CABLE
Game System /

Video Equipment

AUDIO VIDEO
CABLE
VIDEO OUT
AUDIO OUT
AUDIO VIDEO
CABLE
TV
7