Pioneer GEX-P920XM - XM Radio Tuner Operation Manual page 4

XM tuner
Selecting the channel in the Display the ID code (Radio
channel category
ID)
Channels are organized into various program
Each XM tuner is identified with a unique
categories, e.g. Rock, Classic, Jazz. You can
Radio ID. You will need the Radio ID when
search between different categories, and
activating XM service or when reporting a
then search among channels within each
problem.
channel category.
1 Select the channel number select
1 Select the channel category select
mode. (Refer to "Switching the channel
mode. (Refer to "Switching the channel
select mode" .)
select mode" above.)
2 Press or to select the channel
2 Press BAND to return to the previous
number zero (CH 000).
display.
The ID code is displayed.
Carefully check your
XM Radio ID. The letters F, I, O, and S are not
3 Press or to select the desired
used.
channel category.
Once you select a channel category, the unit
Notes
searches for channels in that category.
During search, the channel category doesn't
• If you select another channel, display of the
immediately change even if you press the
ID code is canceled.
button. To successively change the channel
• Display of the ID code repeats displaying
category, continue pressing the button.
RADIO ID and the ID code one after the
other.
4 Press or to select the desired
channel in the selected channel category.
The channel number moves up or down in
the selected channel category.
Channels that cannot currently be selected
are skipped, and the next channel in that
channel category is selected.
En
Additional Information
Radio ID
ID Display ID
Refer to the following chart to verify each
1 I (Not used.)
Radio ID, before displaying them on the fol-
lowing head units.
2 J
DEH-P5500MP DEH-P550MP
DEH-P560MP DVH-P5000MP
3 K
DEH-P4700MP DEH-P470MP
DEH-P4600MP DEH-P460MP
4 L
DEH-P4500MP DEH-P450MP
DEH-P3700MP DEH-P3600
5 M
DEH-P360 DEH-P3500
DEH-P350 DEH-P2600
6 N
DEH-P26 DEH-P2500
DEH-P250 DEH-P25
7 O (Not used.)
8 P
9 Q
0 R
A S (Not used.)
B T
C U
D V
E W
F (Not used.) —— X
G Y
H Z
En
Additional Information
Messages
Display
When problems occur with the XM tuner, a message appears on the display. Refer to the table
——
below to identify the problem, then take the suggested corrective action.
Message Cause Action
ANTENNA The XM antenna is not Check whether the XM antenna cable is
connected. attached securely.
A short-circuit occurring in Make sure that there is nothing unusual
the antenna or the surrounding with the antenna or antenna cable. Turn the
antenna cable. ignition off and then on.
UPDATING
Radio is being updated with Wait until the encryption code is fully
latest encryption code. updated. Channels 000 and 001 should
function normally.
——
NOSIGNAL XM signal is too weak at the Wait until the car reaches a location
current location. with a stronger signal.
LOADING Unit is acquiring audio or Wait until the unit has received the
program information. information.
OFF AIR The channel currently selected Select another channel.
has stopped broadcasting.
– – – – – – – – The user has selected a channel Automatically switches to Channel 001.
number that does not exist or is
——
not subscribed to.
– – – – There is no artist name/feature, No action needed.
song/program title, or channel
category associated with the
channel at that time.
Note
When the messages that is not listed above are displayed, refer to the operation manual supplied
with the head unit.
En
Additional Information
Specifications
General
Power source ...................... 14.4 V DC (10.8 – 15.1 V
allowable)
Grounding system .............. Negative type
Max. current consumption
............................................. 2.0 A
Dimensions (W × H × D) ..... 179 × 27 × 139 mm
(7 × 1 × 5-1/2 in.)
Weight ................................. 0.56 kg (1.24 lbs)
XM tuner
Frequency range ................. 2,332.50 – 2,345.00 MHz
Usable sensitivity
Satellite ....................... – 105 dBm
Terrestrial .................... – 102 dBm
Audio
Signal-to-noise ratio ........... 90 dB (IHF-A network)
Separation .......................... 85 dB
Antenna
Power source (Provided by the satellite line)
............................................. 4.9 V DC
(4.4 – 5.4 V allowable)
Max. current consumption
............................................. 0.1 A
Type ..................................... Active type
Dimensions
Base (W × H × D) ........ 29 × 14 × 40 mm
(1-1/8 × 1/2 × 1-5/8 in.)
Cord ............................. 5 m
(16 ft. 5 in.)
Weight ................................. 0.06 kg (0.13 lbs)
Note
Due to possible improvements, specifications
and design are subject to change without
notice.