ENFORCER BP-601 Manual

Post-Mount Housing
Manual
BP-611 shown
Specifications
Model
Housing /
1
16
Material
Faceplate
Cutout
Dimensions 5"x6
Weight
2-lb 6-oz (1065g) 2-lb 4-oz (1030g)
*
Depending on the size of the hardware behind its faceplate, some
single-gang devices will also fit.
Installation
Please read the manual carefully before you begin
the installation.
1. Open the housing using one of the keys.
2. Mount the housing to the wall or post running the
wires through the larger hole in the back.
3. Close the housing and mount your device to the
faceplate using the device's mounting screws.
Though the cutout out is sized for slimline
devices, single-gang devices can also be
installed if its internals fit through the cutout (or
the cutout may be enlarged). The mount screw
locations are the same.
4. Open the housing again to connect the wiring,
close and test.
California Proposition 65 Warning: These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
WARRANTY: This SECO LARM product is warranted against defects in material and workmanship while used in normal service for one (1) years from the date of sale to the original
-
customer.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice.
SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2025 SECO-LARM U.S.A., Inc.
All rights reserved.
SECO-LARM
16842 Millikan Avenue, Irvine, CA 92606
Phone: (949) 261-2999 | (800) 662-0800
BP-601 BP-611
" (1.2mm) Steel, powder paint
Stainless steel
No Slimline-sized*
/ "x3 / " (127x166x94 mm)
9 11
16 16
U.S.A., Inc.
®
 Easy access, hinged faceplate
 Available with or without faceplate cutout
 Rugged steel, powder paint housing with stainless
steel faceplate
 IP65 Weatherproof
Parts List
1x Housing
4x Wall anchors 4x Carriage bolts
1x Manual
*No replacement keys available. Make copies for safekeeping.
Models
Model Cutout
BP-601
No cutout, solid faceplate
Overall, 1
BP-611
Effective, 1
Overview
Front (cover closed)
5"
(127mm)
BP-601 shown, BP-611 same size and shape
shown from inside as opened
2 / "
7
8
(73mm)
(36mm)
Website: www.seco-larm.com
Email: sales@seco-larm.com
4x Mounting screws 2x Keys*
/ "x4 / " (36x107 mm)
7 3
16 16
/ "x2 / " (36x73 mm)
7 7
16 8
Side
3 / "
11
16
(94mm)
BP-611 Cutout size
3 / "
1
4
(83.3mm)
1 / "
7
16
Order Part# 762-601%
MI_BP-6x1_241105_ML.docx
4x Nuts
6 / "
9
16
(166mm)
4 / "
3
16
(107mm)
®
PITSW1