Storing And Recalling Broadcast Stations; Advanced Operations Using Special Buttons; Function And Operation - Pioneer DEH-P7200HD Operation Manual

Available accessories
Switching the SIRIUS display
1 Press and hold DISP/
Play time—Channel number—Channel name—
Category name—Artist name—Song title/pro-
gram title—Composer name
! Play time is displayed during the Instant Re-
play mode. Refer to Using Instant Replay
function on the next page.
! Play time display indicates the time inverted
from the live broadcast. Play time is displayed
in negative number.
Displaying the Radio ID
1 Push M.C. left or right to select CH 000.
! To select CH 000, set the channel select setting to
Channel number. About the channel select set-
ting, refer to Selecting the SIRIUS channel select
mode on this page.
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
Storing and recalling broadcast
stations
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
1 Press /LIST.
Preset screen is displayed.
2 Use M.C. to store the selected station in
memory.
Turn to change the preset number. Press and
hold to store.
The SIRIUS preset number you have selected
will flash and then remain lit. The selected sta-
tion has been stored in memory.
3 Use M.C. to select the desired station.
Turn to change the station; press to select.
# You can also change the station by pushing
M.C. up or down.
/SCRL.
Advanced operations using
special buttons
Selecting the SIRIUS channel select mode
1 Press S.Rtrv/SAT MODE repeatedly to select the
desired channel select setting.
Channel number (channel number select set-
ting)—Category (channel category select
setting)

Function and operation

1 Press M.C. to display the main menu.
2 Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to
select.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Channel mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by number,
channels in any category can be selected. Select by
category to narrow your search down to only chan-
nels in a particular category.
1 Press M.C. to change the channel select mode.
Channel number (channel number select set-
ting)—Category (channel category select setting)
Game alert (game alert setting)
Section
03
29
En