Clas Ohlson Granholmen T100PP4476 Quick Start Manual

Micro-LED Christmas Tree,
Granholmen
Art. no 44-5823 Model T100PP4476
Please read the entire instruction manual before using the pro-
duct and then save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. In the event of technical problems or
other queries, please contact our Customer Services
Safety
Warning:
The product is intended for indoor use only.
• The LED lights cannot be replaced.
• The product must only be connected to the included mains
adapter.
• The mains adapter is only intended for using with the
included product. Never connect additional string lights or
other types of products to the mains adapter.
• The mains lead must never be replaced. If the mains lead is
damaged the entire product must be discarded.
Assembly
1. Open up the stand, line up the holes and screw in
the screw loosely.
2. Fit the bottom part (A), the part
with the pointed stem, into the foot
and tighten the screw. Straighten
the branches so they look good.
3. Locate the light connector and
place it within easy reach.
4. Locate part C. It has a square hole in the top to match the
trunk of part D.
5. Assemble the rest of the tree, this can be done in two ways:
Note! Remember to locate the light connectors and place it
within easy reach.
- Fit part B into part A. Fit part D into part C and screw the
connector together. Fit part C/D into part B.
- Assemble the parts in the following order (see below), a
foot stool might be needed to fit the top part.
A
6. Screw the connectors together.
7. Screw the mains adapter to the lights and then plug it into an
electrical socket.
D
C
B
A
Lights
Press the foot switch to turn the lights on or off.
Dim the lights by pressing the button on the control box
repeatedley as follows:
100 %  70 %  40 %  10 %
Note! The light will start on the last used dimmer setting.
Timer
If the button on the control box shines red the timer is on.
If not, the timer is off.
Hold the button for 3 seconds to activate the timer, the lights will
flash to indicate that the timer is on and the button will turn red.
The light will be on for 8 hours. The light will then switch off for
16 hours before coming back on again automatically for 8 hours,
and so on in a continuous cycle.
Hold the button for another 3 seconds to deactivate the timer,
the lights will flash to indicate that the timer is off and the button
will turn white.
Care and maintenance
The product can be cleaned using a damp cloth or vacuum
cleaner. Use only mild cleaning agents, never solvents or
corrosive chemicals.
Responsible disposal
This symbol indicates that the product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any
harm to the environment or health hazards caused
by incorrect waste disposal, the product must be
handed in for recycling so that the material can be
disposed of in a responsible manner. When recycling
your
product, take it to your local collection facility or contact the
place of purchase. They will ensure that the product is disposed
of in an environmentally sound manner.
Specifications
Mains adapter In 220–240 V AC, 50/60 Hz
Out 12 V DC, 9 W,
IP44
LED 9W, 1000 x 3V/0.03W
Size 300 x 190 cm
English