Troubleshooting; Specifications - Insignia NS-S6000 User Manual

Troubleshooting

Problem Possible cause
No sound The volume is set too low. Increase the volume.
Connections are loose or
incorrect.
The vehicle's audio
system is damaged.
Distorted sound Audio wires are
connected incorrectly.
The speaker wires or
speaker is damaged.
The vehicle's audio
system is damaged.
Note
Good ground connections eliminate most electrical noise problems and
require tight contact with the metal vehicle chassis. Remove plastics, paint,
or rust at the grounding connections for good electrical contact. If you are
still having difficulty, contact Insignia.

Specifications

Specifications are subject to change without notice.
Loudspeaker cone
Magnets
Peak output power
Rated output power
Impedance
Sensitivity
Frequency response 65 to 20000 Hz
Dimensions
Weight
Box dimension
(L × H × W)
10
NS-S6000 6½" 3-Way 70-Watt Car Stereo Speakers
Solution
Make sure that power and speaker
leads are connected correctly and
securely.
Take the vehicle to a repair shop
for service.
Make sure that the wires are
connected with the correct polarity
(+ or –).
Replace the speaker wires or
speaker.
Take the vehicle to a repair shop
for service.
Woofer: 6.3 inches (16 cm) electroplate
injection
Main: Ferrite 10 Oz
Tweeter: Neodymium
70 W
35 W
4 Ohm
89 dB
6.92 × 3.23 inches
(176 × 82 mm)
Net: 2.14 lbs. (0.97 kg)
Gross: 4.74 lbs (2.15 kg)
14.69 × 8.39 × 5.16 inches
(373 × 213 × 131 mm)
www.insignia-products.com