3core technologies Personal Audio Enhancer PAE-300 User Manual

Personal Audio Enhancer
PAE-300
Bluetooth Dongle
User Manual
Identifying the part
2
1
1. Power / Pairing Button
2. LED Indicator (Blue / Red)
3. Charging port
3
4. Micro-USB plug (No function)
5. Stereo plug
4
5
Connecting with PAE-300
Plug the Stereo plug and the Micro-USB
plug on the PAE Bluetooth Dongle all the
way into the Stereo port and Micro-USB
charger port on the PAE-300 respectively.
1. Power On
When the PAE Bluetooth Dongle is off, press and hold the
Power/Pairing Button until Blue LED lights up and flash
(approximate 5 seconds).
2. Power Off
When the PAE Bluetooth Dongle is on, press and hold
Red
the Power/Pairing Button until LED is on
(approximate 5 seconds) and then off.
Pairing with cell phone
1.
Make sure that the PAE Bluetooth Dongle is powered off first.
2.
Press and hold the Power/Pairing Button for approximate 8 seconds
until the LED flashes in Red and Blue alternately. This means the PAE
Bluetooth Dongle is searching a device to pair.
3.
Only release the Power/Pairing button when the LED is in Red/Blue alternate flashing.
Note:
Note: The LED lights up and ashes in Blue before the Red/Blue alternate ashing, so please DO NOT release the
Power/Pairing Button in this status during pairing process until the Red/Blue alternate ashing occurs.
Basic operation
5sec.
5sec.
Red
Blue