Advertisement
Quick Links
Advertisement
Related Manuals for TRUELOOK 1080p IR PTZ
Summary of Contents for TRUELOOK 1080p IR PTZ
- Page 1 110V and Solar Cameras Leasing Return Guide Pre-2025 Models © TrueLook Construction Cameras...
- Page 2 Getting Started Unlimited Support Thank you for choosing TrueLook’s Leasing Program for your jobsite’s documentation needs! When your lease ends, please use the below information to contact our Leasing Department. Email: leasing@truelook.com Warning: Please note that all equipment is your...
-
Page 3: Pan-Tilt-Zoom Cameras
Preparation Pan-Tilt-Zoom Cameras 1080p IR PTZ 4K PTZ Step 1 If your camera has a power cable that ends in a connector with a silver collar, remove the connector from the camera by hand-twisting the collar counter-clockwise. - Page 4 Preparation Step 2 Remove your camera equipment from its mounting location. If it was pole mounted using steel straps, discard the straps. Step 3 Thoroughly clean off all equipment using a microfiber cloth. All equipment must be completely dry before placing inside the hard case to prevent water damage while in transit. Step 4 Pack into the hard case.
- Page 5 Preparation Camera Systems with a Control Box Fixed 4K IR Strobes and Sirens PTZ (2023 Model) Strobes and Sirens Fixed TrueDeter PTZ (2024 Model) TrueDeter Fixed...
- Page 6 Preparation Step 1 If your control box has a power cable that ends in a connector with a silver collar, remove the connector from the control box by hand-twisting the collar counter-clockwise. Step 2 Disconnect the camera from the control box by untwisting the connector end(s) and pressing the clip to release the connector(s).
- Page 7 Preparation Step 6 Disassemble TrueDeter PTZ/Strobes and Sirens PTZ for packing. Strobes and Sirens PTZ - 2023 Model Loosen the camera from the pendant housing using a T30 Torx screwdriver (not included). Remove the camera by rotating it counter-clockwise until it releases. Turn the yellow ring on the cable counter-clockwise to unlock, then remove the cable from the camera.
- Page 8 Preparation TrueDeter PTZ - 2024 Model Remove the pendant mount top by using a T30 Torx screwdriver (not included) to loosen the screw. Loosen the camera from the pendant housing using the same screwdriver. Remove the camera by rotating it counter-clockwise until it release. Unhook the wire safety tether.
- Page 9 Preparation Step 7 Pack into the hard case. Fixed 4K IR Control Box Cables Camera Strobes and Sirens Fixed, TrueDeter Fixed Cables Control Box System with Camera...
- Page 10 Preparation Strobes and Sirens PTZ, TrueDeter PTZ System Cables Control Box Note: If your hard case is not custom fitted to your camera model, please add extra packing material to avoid shifting.
- Page 11 Step 3 Place your shipping label into a luggage tag (not included) and attach it to the hard case handle. It should be shipped to: TrueLook, Inc. Attn: Leasing Department 305 Junia Ave Winston-Salem, NC 27127 Step 4 Email the shipment tracking number to leasing@truelook.com.
- Page 12 Shipping Solar Cameras Follow the instructions in the Solar Equipment Leasing Return Guide to secure the hard case onto the pallet and ship the equipment. TRU25019-02-01 D3...
Need help?
Do you have a question about the 1080p IR PTZ and is the answer not in the manual?
Questions and answers