Table of Contents
Advertisement
Quick Links
Instruction Manual
Model:
PSX2-M1-EU
CORDLESS RANDOM ORBITAL
SANDER
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION: Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
v. 1.1
English
Advertisement
Table of Contents
Summary of Contents for Senix PSX2-M1-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU v.
-
Page 2: Table Of Contents
Do not dispose of battery packs in rivers or immerse in water. Do not dispose of battery packs in fire. They will explode and cause injury. Use and store the battery within an temperature below 50°C (122°F). EN - 2 SENIX.COM.AU... -
Page 3: Safety Instructions
Damaged or entangled cords increase the connected and properly used. Use of risk of electric shock. dust collection can reduce dust-related When operating a power tool outdoors, hazards. use an extension cord suitable for 3 - EN SENIX.COM.AU... - Page 4 WARNING! Slippery handles and grasping surfaces do not allow for safe handling and control of Only use following batteries: B20X2/B25X2/ the tool in unexpected situations. B40X2/B50X2/B60X2/B80X2 and chargers: CHX2/CHQX2/CHQX2-M-EU/CHDX2-M-EU. EN - 4 SENIX.COM.AU...
-
Page 5: Intended Use
Have the product checked by a qualified professional and repaired, if necessary, before you operate it again. INTENDED USE The tool is intended for sanding wood, plastic and metal surfaces. 5 - EN SENIX.COM.AU... -
Page 6: Know Your Unit
KNOW YOUR UNIT APPLICATIONS Model: PSX2-M1-EU As a random orbital sander: Sanding large surfaces of wood, plastic and metal materials. Dust Collection Bag Vacuum Port Vacuum Port Adjustment Switch Sanding Pad Speed Control Button Power Button EN - 6 SENIX.COM.AU... -
Page 7: Specifications
Unpack all parts and lay them on a flat, stable surface: Remove all packing materials and shipping devices, if applicable. The scope of delivery varies depending on the country and purchased variant. Model of PSX2-M1-EU • Random orbital sander x1 • 60-grit sandpaper sheet x1 •... - Page 8 WARNING! Do not use the tool without the vacuum port properly installed. Fig. 6 Press the vacuum port adjustment switch to adjust the direction of the vacuum port, and release the button once satisfied with the EN - 8 SENIX.COM.AU...
-
Page 9: Operation
Press the power button to stop the tool. After the machine stops, the corresponding speed indicator LED continue to light for 10 seconds, during which time you can press Fig. 9 the power button to start the tool again. 9 - EN SENIX.COM.AU... -
Page 10: Maintenance
Hold the tool firmly. Turn the tool on and wait safe operation. until it reaches full speed. Then gently place the tool on the workpiece surface. Keep the sanding pad flush with the workpiece and apply slight pressure on the tool. EN - 10 SENIX.COM.AU... - Page 11 Batteries should not be discarded with household products. Used batteries must be collected separately and disposed of at collection points provided for this purpose. Talk with your local authorities or dealer for advice on recycling. 11 - EN SENIX.COM.AU...
-
Page 12: Troubleshooting
Battery pack needs to be replaced Replace with a new battery pack Remove and replace dust Dust collection Dust collection bag is damaged collection bag. If problem still bag is not working or loose persists, contact your Authorized properly Service Center. EN - 12 SENIX.COM.AU...
Need help?
Do you have a question about the PSX2-M1-EU and is the answer not in the manual?
Questions and answers