Page 1
CAUTION: Before using this product, read this manual and • OPERATION follow all safety rules and operating instructions. • MAINTENANCE Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU v. 1.1...
Do not dispose of battery packs in rivers or immerse in water. Do not dispose of battery packs in fire. They will explode and cause injury. Use the battery with a maxium temperature of 50°C (122°F). EN - 2 SENIX.COM.AU...
Damaged or entangled cords increase the safety principles. A careless action can risk of electric shock. cause severe injury within a fraction of a When operating a power tool outdoors, second. use an extension cord suitable for 3 - EN SENIX.COM.AU...
Recharge only with the charger specified by the manufacturer. A charger ROTARY HAMMER SAFETY that is suitable for one type of battery pack may create a risk of fire when used with WARNINGS another battery pack. EN - 4 SENIX.COM.AU...
INTENDED USE This rotary hammer is intended for drilling in concrete, masonry, wood and wood-based materials, plastic, and metal. Do not use it for other purposes. 5 - EN SENIX.COM.AU...
KNOW YOUR UNIT APPLICATIONS Model: PDRX2-M2-EU As a cordless rotary hammer: Drilling in concrete, masonry, wood and wood- based materials, plastic, and metal. Dust Collection Shroud Overmold Grip Area Depth Gauge Mode Selector Switch Auxiliary Handle Belt Clip Variable Speed Trigger...
Unpack all parts and lay them on a flat, stable surface: Remove all packing materials and shipping devices, if applicable. The scope of delivery varies depending on Fig.1 the country and purchased variant. Model of PDRX2-M2-EU AUXILIARY HANDLE • Rotary hammer x1 • Belt clip x1 •...
(2) and ensure a secure fit. Fig.6 The dust collection shroud exposes the chuck collar (1) when correctly installed. Pull the chuck collar (1) down to install or remove the SDS-Plus drill bit (2). EN - 8 SENIX.COM.AU...
DRILLING MODE The drilling mode is controlled by the mode selector switch. Press the lock button and rotate the mode selector switch until the arrow points to the corresponding symbol for the desired drilling mode. Fig.9 9 - EN SENIX.COM.AU...
NOTE: Always lock the variable speed trigger using the neutral position on the forward/reverse switch when the tool is not in use or before storage. EN - 10 SENIX.COM.AU...
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment or accessories. If abnormal noise or vibration occurs, have the tool inspected and serviced 11 - EN SENIX.COM.AU...
Page 12
Check with your local authority or retailer for recycling advice. Users should clean up dust generated during operation to protect environment. Battery should not be discarded with household waste. Dispose of battery according to local regulations. EN - 12 SENIX.COM.AU...
Product does not reach full power Battery pack reaches its life Replace with new battery pack cycle Drill bit is dull Replace with new one Unsatisfactory result Drill bit is not suitable for Use an appropriate bit current operation 13 - EN SENIX.COM.AU...
Need help?
Do you have a question about the PDRX2-M2-EU and is the answer not in the manual?
Questions and answers