Table of Contents
Advertisement
Quick Links
A-Zoom µ Micro
Microscope
REFERENCE MANUAL
Optical, m echanical, and
operational instructions for
the A-Zoom Micro Microscope
Congratulations on specifying an A-Zoom Micro
microscope for your probing and analytical workstation.
You now possess a precision instrument to maximize
your analytical imaging effectiveness and productivity.
In the tradition of the field-proven A-Zoom Microscope
line, the A-Zoom Micro has been designed to deliver
performance, reliability and value.
Please read this manual carefully to fully familiarize
yourself with the features, operation and set-up of the
A-Zoom Micro Microscope.
For technical assistance, contact your local dealer or the
Qioptiq Customer Service Department
at (585) 223-2370.
Advertisement
Table of Contents
Summary of Contents for Qioptiq A-Zoom m Micro
- Page 1 Please read this manual carefully to fully familiarize yourself with the features, operation and set-up of the A-Zoom Micro Microscope. For technical assistance, contact your local dealer or the Qioptiq Customer Service Department at (585) 223-2370. ...
-
Page 2: Table Of Contents
Table of Contents Document Conventions and Symbols ....3 Important Safety Information ......3 Operational Safety & Important Safeguards ..4 CE Compliance Notification ......5 Declaration of Conformity ....... 6 General Information ........7 Features ............ -
Page 3: Document Conventions And Symbols
1.0 – Important Safety 1.10 Ventilation Slots and openings in the enclosures of this instrument and Information its accessories are provided for proper ventilation and to ensure reliable and safe operation of the product and to prevent it from overheating. -
Page 4: Operational Safety & Important Safeguards
1.25 amps is required for operating voltages 1.21 Replacement Parts between 220 – 240 Volts. Contact your local dealer or Qioptiq, Inc. for a complete list of replacement parts. 2.03 Power Plug This product is equipped with a 3-wire grounding type 1.22 Mounting... -
Page 5: Ce Compliance Notification
2.0 – Operational Safety and 2.14 Replacement Parts Contact your local dealer or Qioptiq, Inc. for a complete Important Safeguards (Cont.) list of replacement parts. 3.0 – Regulatory Compliance 2.06 Ventilation Operate the microscope in a well-ventilated area. Provide clear space around all the microscope components for 3.01 CE Marking... -
Page 6: Declaration Of Conformity
3.0 – Regulatory Compliance 6 ... -
Page 7: General Information
5.0 – General Information on Available with fixed or tilting binocular, trinocular and Camera-Port only Heads. Refer to Page 14 of this A-Zoom Micro manual for details. The A-Zoom Micro Microscope can be supplied in many 1/2”... -
Page 8: Dimensions & Performance Specifications
7.0 – System Overview & Specifications ® System Dimensions (58-01-00-000 shown with Optem 10X/0.45NA high-Resolution Objective) 5.00 ø1.93 2.95 15.02 9.76 7.89 2.14 6.06 2.81 2.31 4.00 8.52 7.70 A-Zoom Micro Optical Performance Specifications Infinity-Corrected Working Visual Visual... -
Page 9: Operating Considerations
8.0 – Operating Considerations • Excessively warm or cold environments. • Operating ambient temperature: 20°C to 35°C. • Relative humidity not to exceed 50%. 8.01 Power Supply • Environments exposed to excessive vibration or shock. The A-Zoom Micro Microscope has been designed to •... -
Page 10: Mounting Instructions
9.0 – A-Zoom Micro Mounting 9.02 Focus Block Operation 9.01 Attaching Focus Block to prober The focus block is factory set to lift a 30lbs. load. To The A-Zoom Micro mounts to your probe station using four increase the load capacity of the focus block, simply (04) #8-32 x 1/2 socket head cap screws provided. -
Page 11: Connecting To Power
10.0 – Connecting Your BE SURE TO READ AND UNDERSTAND A-Zoom Micro to Power THE INTERCONNECT DIAGRAM SHOWN IN FIG. 7 BEFORE APPLYING POWER TO 10.01 Connecting A-Zoom Micro to power THE SYSTEM. Follow the diagram below to connect your A-Zoom Micro properly to wall power for the on-board LED illumination system: ( See Fig. -
Page 12: Integrating Objectives
Optem High-Resolution LWD Objectives offer a much used with Optem High-Resolution, Infinity-Corrected higher numerical aperture and light gathering ability than Objectives available from Qioptiq, Inc., in 5X, 10X and 20X other 5X, 10X and 20X objectives. Objectives sold magnifications. Optem High-Resolution, Infinity-Corrected separately. -
Page 13: Microscope Heads & Eyepieces
12.0 – A-Zoom Micro Head 12.02 Changing out Microscope Heads Using a 5/64” Allen (Hex head) wrench, loosen the Options microscope head locking screw through the small access hole located at the top center of the front main microscope body (fig. -
Page 14: Utilizing Polarizers
There should be no adjustment required. If the system Insert Analyzer Slider with Dial closest to the top requires any adjustments, contact your local dealer or a technical representative from Qioptiq, Inc. 13.0 – Utilizing Polarizers with A-Zoom Micro 13.01 Polarizer Options A-Zoom Micro offers linearly polarized light imaging. -
Page 15: Service And Technical Assistance
Qioptiq Sales Manager for all one (1) year from the ship date at Qioptiq. During this assistance in servicing your A-Zoom Micro Microscope. period Qioptiq will repair or replace at the facility of Qioptiq any part or assembly of parts found to be 14.01 Copies of This Manual... - Page 16 For technical information contact: Qioptiq, Inc. 78 Schuyler Baldwin Drive Fairport, NY 14450 info@qioptiqlinos.com ph: +1 585 223-2370 fx: +1 585-223-1999 www.qioptiq.com 580100-400 16 ...
Need help?
Do you have a question about the A-Zoom m Micro and is the answer not in the manual?
Questions and answers