DVB T2 Manual

In the Box

Please take a moment to make sure that you have everything in the list below:

• Portable TV: 1
• Remote control: 1
• AC/DC adapter: 1
• Car charger: 1
• AV cable: 1
• Stand: 1
• External antenna: 1
• Instruction Manual: 1
• Operation Guidelines: 1

At a Glance

Main Unit

1	Remote sensor	Detects IR signals from the included remote control.
2	POWER OK	Short press this button for OK function, long press this button for 3 seconds for standby function.
3	SOURCE	Change the active source mode. Press to view the Mode menu; press CH+/CH- to browse the List of modes; then press OK to select and change the mode.
4	MENU	Press to confrm a selection in the system menu. Access the system menu to adjust the TV's options.
5	VOL	Volume down/browse Left when navigating menu
6	VOL	Volume up/browse right when navigating a menu
7	CH	Channel up/browse down when navigating a menu
8	CH	Channel up/browse up when navigating a menu
9	Charging indictor	The indicator light is red when the battery is charging and goes out when the battery is finished charging.
10	Power indictor	The indicator light is green when the TV is turned on and red after standby.

The Remote Control

To adjust the volume when playing an MP3 or video file, first press the CH key on the TV to hide the system menu, then press VOL or VOL to adjust the volume.
To return to the system menu, press OK.
Notes:

1. Keep within 3 meter distance when using the remote control to work TV.
2. Keep about 30° angle or the obverse angle to aim lR sensor location on TV.

lnstall two 1.5V AAA batteries

When using remote control, make sure the remote control is pointed to INFRARED RECEIVING WINDOW of the machine. The distance between machine and remote control must be within 3 meters. Please refer to the following illustration.

Notice:

1. Push the button cell holder firmly in to keep it working
2. To avoid falling off or place near damp environment.
3. To avoid infrared receiving window of the unit being under direct sunlight.
4. Please use a new battery to replace old one if the remote control doesn't work.

Remote Control

1. : Standby/power-on key.
2. SOURCE Press "MODE" in remote to choose function.
3. SEARCH: Press the "search" button to display the channel search menu, select the country and region to search for channel programs.
4. : Mute key.
5. 0-9: Digit keys. Press the key to enter channel directly.
6. : Return Key and also recall function when Multi-media
7. FAV: ON/OFF my favor channel function.(only available under DTV mode)
8. LIST: Display program list.
9. INFO: Display current Channel information.
10. EPG: press to display electronic program guide (only available under DTV mode).
11. OK: Confirm key.
12. CH+ : Channel selection/upward key.
13. CH- : Channel selection/downward key.
14. VOL+ : Volume up/rightward key.
15. VOL- : Volume down/leftward key.
16. AUDIO: Sound track switch key.
17. MENU: Menu key.
18. EXIT: return key; press to exit current menu and return toprevious menu.
19. TV/RADIO: TV channel and radio channel switch key.
20. "RED" key: Corresponding menu red function key.
21. "GREEN" key: Corresponding menu green function key.
22. "YELLOW" key: Corresponding menu yellow function key. (Under DTV mode, press this key to switch aspect ratio)
23. "BLUE" key: Corresponding menu blue function key. (Under DTV mode, press the key for timing burn function)
24. P.ADJ:Sound mode switch key, press for"Standard","Music","Movie","Sports","User".
25. PICT: Picture mode key, press for "STANDARD","SOFT", "VIVID", "LIGHT","PERSONAL".
26. SLEEP: sleep turn off time setting key.
27. SUBTITLE: Press to turn ON/OFF subtitles.

28. TEXT: Turn teletext function.
29. : Fast Backward.
30. : Fast Forward.
31. : Last key.
32. : Next key.
33. : Stop key.
34. : Play/Pause button.
35. REC : Press this key to record playing channel, then press stop key to exit

Multi-Interface Support

Support HDMI/AV/USB/Mini-SD Inputs

Basic Operation

Connect the Power Supply
Use the supplied power to connect the DC Input jack on the TV to a power supply. The AC power adapter works with AC 100-240V outlets; the DC 12V car adapter works the power socket found in most motor vehicles.

Connect the Antenna
Use the supplied external antenna for improved TV reception. connect one end of the antenna extension adapter to the Antenna Input jack of the TV. Connect theother end of the adapter to the supplide exteral antenna.

Connect an External A/V player
The TV can accept composite video and audio signals from external players (e.g., DVD player). Using the supplied A/V cable, plug the side with the 1/8 jack into the AV IN connector of the TV. Connect the yellow RCA plug to the composite video out jack of the external player; connect the white and red RCA plugs to the L/R audio out jacks of the external player, respectively.

TV Connection Method

Using the Number Keypad
Use the number keypad(o-9) on the remote to tune directly to a channel or to input a value when promptedon a menu or option screen.
To tune to channel 1-15,for instance:

1. Press the"1"key, then press the "5"key.
2. Press the"--/-"key.
3. Press the OK key.

To go to track 15,for instance:

1. Press the "1" key, then press the "5" key.
2. Press the OK key.

Adjusting the Volume

• Use the VOL- and VOL+ keys to increase or decrease the volume level, respectively. press the MUTE key on the remote control to disable sound out put completely.
• Press the MUTE key again to restore sound output.

Setting the Input Source
Set the input source to choose which connection is active and displayed on the TV screen.
Press the remote control 「SOURCE」or the panel「SOURCE」key to access the input source menu, then press CH or CH to change the input source.
Press oK to confirm the selection.

Operation Guide for TV Search

1. When using for the first time, choose the system language according to your region.
   
2. Select your country and region 【Do not select the wrong country or you will not be able to search for TV programs】.
   
3. You can also enter the program search menu throughthe remote control 【search】 key.
   
4. Select your country to enter the automatic channel search interface, and you can watch normally if the search volume exceeds 100%.
   
5. The system menu search method
   Press the remote control or the panel "Menu" key to call up the system menu, use the "ok" button to select the connection method of the TV antenna, and then select "Auto Scan" to enter the automatic search channel interface, if the search effectis not good, please check the "5V antenna power" optionis in the "Off" state.
   
6. lf you accidentally select the wrong time zone and the latter modifies the parameters of other options in the system menu, please follow the figureto proceed to<Restore Factory Default> and perform operations 1~4 again.
   

TV Menu Operation

Press the MENU key to access the menu list and then press the ENTER key on Remote to enter the list.
Press the CH+ /CH- and VOL- / VOL+ key to move within the Menu, and then press the ENTER key on Remote to confirm the change. To exit the menu, press the EXIT key on Remote to back out of all menu options.

Channel

1. Air/Cable: Set to Air if you are using an antenna like the ones provided to receive over-the-air TV broadcasts. Set to cable if you are connectingto a Cable TV system.
2. Auto Scan: Automatically finds all TV stations with a signal and saves them to the channel list.
   Note: use this Auto Scan feature whenever you move the TV to a different geographic location.
3. 5V Antenna power: Please set it to "Off " when using the active amplifier antenna, otherwise the antenna will not have power supply and thegain will be poor.
4. Favorite: Add channels to the Favorites list. Press and to browse the channel list, then press OK on Remote to mark/unmark a channelas a Favorite.
   You can stilltuneto a hidden channel directly with the numeric keypad
5. Show/Hide: Choose whether a channel will be select- able when tuning with the CH+ /CH- keys. press and to browse the channel list, then press OK on Remote to mark/unmark a channel as hidden.
6. Software Update (USB): Used to perform software updates via USB.
7. DTV Signal: Displays the signal quality of the cur-ren channel.

Picture

1. Picture mode: Select a picture preset that looks best(Standard, Soft, user, and Dynamic).
2. Color Temperature: Press"OK"on Remote then the arrow keys to adjust color to Warm, User or Cold.
3. Aspect Ratio: Adjust the screen width by pressing ENTER on Remote then arrows to select Auto, 4:3,16:9,Zoom1, Zoom2 and Panorma.

4. Noise Reduction: Press"OK"on Remote then the varrow keys to select, close, low, middle, or high.

Sound

1. Sound mode: Set a preset equalizer to match the type of program you are watching from; standard, music, movie, sports, and user setting.
2. Balance: Press "OK" on Remote then the arrow keys to adjust the audio level from -50 to 50.
3. Auto Volume. Press the"OK"key on Remote to enter the menu and select Open or Close to set Auto Vol.
4. Audio only: Press the"OK"key on Remote to enter the menu to select, close the image signal. Only audio will be heard as the image will disappear.

Time

1. Clock: Press the"oK"key on Remote to enter the menu, then the to select; then press the keys to adjust the current date and time.
2. Off Time: Press the"oK"key on Remote to enter the menu, then arrow keys to set a day and time to auto shut off the TV.
3. On Time: Press the"oK"key on Remote to enter the menu, then arrow keys to set a day and time to auto turn on the TV.
4. Sleep Timer: Set a timer. the TV will turn off automatically at the end ofthe timer.
5. Auto Sync: Set the system time to match the time carried by the antenna signal(cable or air). This option is not adjustable. TheTV must be connected to an antenna or cable system for Auto Sync to work.
6. Time Zone: Set the time zone adjustment to match your location.

Option

1. OSD Language: Set the display language of the onscreen menus.
2. Closed Caption: When closed caption is availabe for a TV program, a synchronized transcript of the program can be displayed on screen.
   • Select Of fto never displaythe closed caption information.
   • Select On to always displaythe closed caption information.
   • Select CC on Mute to only displaythe closed caption information when MUTE is enabled.
3. Setup Wizard: An on-screen guide that will help you get your TV up and running. Set the menu language, time zone, DST, and time format. Then, it scans all the channels to find all stations within broadcast range.
4. Restore Factory Default: Return all options to their factory setting
5. TTS (Text to Speech): Converts normal language text to speech.

Lock
Use the remote control to 0K the default password(9999) to accessthe lock options.

1. Lock System: Enter the default password of 9999) to access the Lock Options to enable or disable.
2. Set Password: Set a new password. When you change the password, write it down and store it in a safe place. Resetting the factory options will not reset the password.
3. Input Block: Completely block the TV mode or the AV modes.
4. US: Prevent programs from being viewed based on US TV or MPAA rating guidelines.
5. Canada: Prevent programs from being viewed based on Canadian English or French guidelines.
6. Reset RRT: Refresh the Rating Region Table if you are having problems with the US or Canada rating guidelines.
7. Unrated: Enable or disable the ability to watch unrated programs.

Multimedia Interface

Make sure your USB drive is in the USB on the TV.
From the input Menu, select MEDIA.
Press Enter key on remote to access either Photo/Music/Movie/ or Text icon.
Note: Supports up to 256GB of USB storage, external power supply is required if using a removable hard disk enclosure.

Photo Playback
Insert your USB drive in the USB on the TV. Press the arrow keys to select Photo and pressEnter.
Press HI to start slide show. Press or to display the previous and next photo. Press return to quit.

Music Playback
Insert your USB drive in the USB Slot on the TV. Press the arrow keys to select Music and press Enter.
Press to play music. Press to play the previous and next track.
Press return to quit.

Movie Playback
Insert your USB drive in the USB Slot on the TV. Press the arrow keys to select Movie and press Enter.
Press to play movie. Press or to display the Last chapter and next chapter. Press return to quit.

Text Playback
Support ANSI/UNICODE GB/UTF8 encoding format Text file playback.

Support format as follow:

Specifications

Note: Products are improved continuously. We reserve the right to modify the product and specifications without prior notice.

Note

1. After finish search for TV program, like show 50 channel, but can not see much.some time got fake channel, as per real TV program which can watch.
2. This is a normal digital DVB-T2 TV that uses an antenna to receive signals.
3. Supports up to 256GB of USB storage, external power supply is required if using a removable hard disk enclosure.

Trougbleshooting Tip

Not Able to get local channe/ stations

To solve this problem, you can use an amplifier antenna to boost the signal through the coaxial cable. The cause of poor reception is simple: find out which broadcasting towers are in your area, and aiming the antenna at a
TV tower can improve reception.
The antenna extension cable must be straightened or reception will be affected!

For best reception

• Place the antenna in or near a window...
• Go as high as possible.
• Test different antenna placements, Scan for channels in different room, location outdoors. RV,etc.
• Use a Longer Cable To Reach Window...
• Face it in the Right Direction...
• Move it Higher Up - HIGHLY RECOMMENDED...
• Put it in a Skylight, rooftop - HIGHLY RECOMMENDED!..

★ You can also try to use an Amplified Antenna or outdoor antenna that can to more in mile range.
★ Use the digital antenna and put it on a metal base, then scan for channels.
★ Please refer to "TV Channel Scan Procedure Manual" to get more informations about TV reception.

Contact US: servicesupport2022@163.com
WhatsApp: +86 13823763930

Before Your Start

Please take note of the following before you start.

The operation instructions provided are intended for reference, only Changes in the manufacturing process may cause the features and designs described herein to change without notice.

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
• The mains plug is used to disconnect the device from power. The mains plug must remain readily accessible and able todisconnect completely from the mains.
• The apparatus should not be exposed to dripping or splashing liquids. No objects filled with liquids, such as vases, shall be placed on theapparatus.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as direct sun-shine, the interior of a parked car, fire or the like.
• Danger of explosion if battery isincorrectly replaced. Replace only with the same or equivalent type.

Storage

• Keep this product away from extremely hot or cold places. This storage temperature range of this de-vice is 20°C to 60°C(-4°F to 140°F); the operating temperature range of this device -5°C to 40°C(23°Fto 104°F).
• Do not use this product in a damp environment (e.g. in or near bathtubs, wash basins, kitchens, basements, swimming pools, or similar places).
• Do not expose your TV set to high humidity, dust orsmoke (including auto exhaust).
• Do not throw or drop this product.
• Do not subject this device to strong vibrations or impact. lf using the devicein a car, rough roads will shorten the life of your device.
• Do not puncture or abrade the device, or otherwise subject it to strong forces.

Maintenance

• Disconnect power and all cables from this device before cleaning it
• Use a soft cloth to wipe the screen, enclosure, and keys. lf necessary, use a cloth lightly moistened with water to wipe the device. Do not use rough or abrasive materials to wipe the device (e.g., a pol-ishing cloth).
• Do not clean the device with astringents, propel-lants, or cleaning agents(including alcohol and benzene).

• Do not use this device while operating a car or other motorized vehicle. Obey all local and federal regu-lations when using this device. There maybe spe-cific laws in your area to prevent distracted driving.
• For your safety and the safety of others, do not turn the TV on or watchTV programs while driving.

Notice

• The panel used in this television contains millions of thin film transistors that have been manufac- tured using a high-technology process to delivera crisp, clear, and detailed picture. Occasionally, afew of these transistors maybecome stuck or non-active; please note that this does not affect theperformance of the television. These light or darkspots are within the normal operating tolerancesof the unit; do not attempt to fix the screen.
• This unit is controlled by microcomputer. lf itshould freeze, please restart it.
• lf the TV behaves abnormally, turn it off imme-diately and please contact us or the retailer. Thisdevice contains many finely tuned electronic com-ponents but has no user serviceable parts inside. Disassembly or alteration may result in damage orserious injury.