Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY 5 OPERATING THE PRODUCT 24 Keys..........25 AND ENVIRONMENT Preparing the machine .....25 General safety ........4 Programme selection......25 Intended use ........4 Auxiliary functions......27 Children’s safety .........5 Scheduling the washing time ....28 Disposing of packaging material..5 Starting the programme ....29 Transportation of the product .....5 Cancelling the programme ....29 Compliance with WEEE Directive and...
InstructIons for safety and envIronment This section contains safety electric shock! instructions that will help to • Never touch the plug with give protection from risk of wet hands! Never unplug by personal injury or property pulling on the cable, always damage.
InstructIons for safety and envIronment • This appliance is intended away from the reach of the to be used in household and children. similar applications such as: Disposing of packaging - Staff kitchen areas in shops, material offices and other working environments.
InstructIons for safety and envIronment Compliance with WEEE collection points designated by the local authorities. Directive and Disposing of the Waste Product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation To make the product ready for use, • Do not install the product at places make sure that the electricity, tap water where temperature may fall below supply and water drainage systems are 0ºC. appropriate before calling the Authorised •...
Installation it. Tightly fix the water discharge hose WaterProtect+ to the drainpipe in order to prevent any The WaterProtect+ system protects against dislocation of the water discharge hose water leaks that may occur at the hose during operation of the product. inlet.Water contact with the valve box of the system must be avoided to prevent damage to the electrical system.
Installation If the supply cord or the mains lead is Connect the blue (neutral) wire to damaged please do not replace it yourself. the terminal in the plug marked ‘N’ or The supply cord or the mains lead must be coloured black.
Preparation Tips for energy saving operates with the same performance continuously. Dishwasher salt is used for Following information will help you use the this purpose. product in an ecological and energy-efficient Use only special softening salts manner. produced particularly for the Wipe away any coarse food remnants on the dishwashers in your machine.
Preparation 2. Turn the salt reservoir lid counter 4. Replace the lid and tighten it securely clockwise to open it (A, B). when the reservoir is full. 5. If you will not start a washing programme Salt reservoir will fill with water immediately after adding the salt, run the when you start the product.
Page 16
Preparation Test Strip 1 second Level 1 No Lime Level 2 Very low lime content Level 3 Low lime content Level 4 Medium lime content 1 minute Level 5 High lime content Very High lime content Level 6 Remove the Let the water Take the test strip Hold for...
Preparation Put the detergent into the detergent If you move your house, it is dispenser just before operating the very important to make the machine as illustrated below. water hardness level adjustment 1. Push the latch to right to open the of your machine according to detergent dispenser lid (A).
Preparation If dishes have been waiting Tablet detergents give satisfying for a long time and have results only under certain usage dried residues, fill the 5 cm³ conditions. The best washing compartment too (5). performance in dishwashers is obtained by using detergent, 3.
Preparation 4. Make the appropriate rinse aid settings. Depending on the model, salt indicator and/or rinse aid indicator must be enabled again if they were disabled before. Rinse aid The rinse aid used in dishwashers is a special combination used to increase drying efficiency and prevent water or limescale stains on the washed items.
Preparation Decorative prints of chinaware To prevent possible injuries, as well as aluminum and silver always place the sharp and items may get discoloured or pointed dishes such as service tarnished after washing in the fork, bread knife, etc. upside dishwasher just as it happens down so as their pointed ends in handwashing as well.
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware 19 / 41 EN...
Preparation Adjusting the height of the upper basket Basket adjustment mechanism on the loaded upper basket of the machine is designed to allow you create taller areas in the upper or lower section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions.
Preparation Collapsible upper basket tines Cutlery basket There are foldable tines on the upper Cutlery basket is designed to wash your basket of the machine that you can lay dishes such as knife, fork, spoon, etc. in an down when you need larger space for big efficient manner.
Preparation Collapsible lower basket tines Bringing the tines to the horizontal position by holding There are foldable tines (A) located at them from the tips may cause the lower basket of the machine are them to bend. Therefore, it will designed for an easier placement of large be appropriate to bring the tines pieces such as pans, bowls, etc.
Preparation Upper cutlery basket The upper cutlery basket is designed for small dishes, or long items that cannot fit into the lower cutlery basket. After taking out the basket by lifting it up, remove the carrier part from the rails by pulling it towards yourself (C).
Operating the product 1. On/Off key 2. Programme Selection / Programme Cancel (3 seconds) key 3. Function keys Express Function Steam Shine function TrayMasterFunction IonFresh Function 4. Programme indicator 5. Salt indicator Not in use 7. Start / Cancel indicator 8.
Operating the product Keys Programme selection On/Off key 1. Press the On/Off button to turn on your When you press On / Off key, indicator machine. lights illuminate on the display for ON 2. Check the Salt and Rinse Aid indicators position.
Operating the product Auxiliary functions Automatic Detergent Detection Feature Washing programmes of your dishwasher The product has a feature to automatically are designed to obtain the best cleaning detect the type of the detergent and effect, considering the type of the soiling, adjust the washing programme and drying soiling degree and properties of the dishes system to the best performance.
Operating the product Scheduling the washing time Changing Warning Sound Volume 1. After turning on the machine, Time Delay press Time Delay and P / P+ keys If an economical electricity tariff is applied simultaneously. Keep them pressed in your region, you can use the Time until the countdown 3, 2, 1 is Delay function to wash your dishes during completed on the display.
Operating the product and wait for the draining process complete. The machine will remain silent Draining is completed in 2 minutes and the in pause mode for some time machine gives an audible warning when it in order to remove the water is completed.
Operating the product not. You need to refill the rinse aid reservoir Water cut-off warning with rinse aid whenever rinse aid indicator If mains water is cut or water inlet tap is appears on the display of your machine. turned off the machine cannot take water in End of programme and E:02 icon will flash on the programme indicator.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller (A, B).
Maintenance and cleaning Top Impeller Check if the holes on the top impeller (1) of your machine are clogged. If they are clogged, remove and clean. To remove them, slightly ( ) push them upwards and then ( ) turn left (A,B). To install the impeller, seat it into its slot, push slightly upwards and turn it rightwards until it is securely tightened.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 38
Troubleshooting necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed. Slightly open the door and wait for evacuation of the steam inside for a while.
Page 39
Troubleshooting during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
Page 40
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 41
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
Gas Installer. items. • The guarantee is given only within the • The labour costs of a Leisure boundaries of the United Kingdom and Consumer Products approved repairer the Republic of Ireland. to carry out the repair. •...
Page 43
Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any difficulty in obtaining service please contact the Leisure Consumer Products Customer Help-Line. Tel: 0845 6004911 e-mail: service@leisurecp.co.uk...
Need help?
Do you have a question about the PDU34390 and is the answer not in the manual?
Questions and answers