Installation Instructions
To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and
use of this luminaire. Please keep instructions for future reference.
Warranty
• This luminaire is covered by a 5-year warranty. The warranty is from date of purchase, not the date of installation.
• If the luminaire is not assembled and installed by a licensed electrician, the warranty will be void.
• Please retain the proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries.
• Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
• This luminaire must be assembled and installed by a licensed electrician.
• All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
e.g. AS/NZS 3000 Electrical Installations.
• The luminaire is a Class I product and must be earthed during wiring and installation.
• This luminaire is rated IP64 and must be maintained during wiring and installation.
• Do not exceed the maximum wattage rating.
• This luminaire must be used with a LED lamp only.
• Select a suitable location for installation:
-
This luminaire is suitable for indoor or outdoor use.
-
The mounting point must support 2 times the weight of the luminaire.
-
This luminaire is rated against water penetration to IP64 standards, which is water splashing from any direction.
• If the diffuser is cracked or damaged. For your safety, discontinue use and replace the diffuser before using the
luminaire again.
• Take care not to pull any electrical wires during unpacking as this may damage the connection.
• Lay out all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
• Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
1 | P a g e
SANTORINI PALOS WALL BRACKET WITH CAGE
Rated Voltage 220-240V~ 50Hz
SKU# 239654
v 1 . 0 ( 0 5 / 2 0 2 4 )
Need help?
Do you have a question about the SANTORINI PALOS 239654 and is the answer not in the manual?
Questions and answers