Teletek electronics PAX RC Operation Manual

ATTENTION: Read carefully this installation Instructions before installing the device! This manual is subject to change without notice!
1. Installation
1 General view & Dimensions
Buttons – number and function
4
No Description
1 Arm Full Arming
2 Disarm Full Disarming
No Func***, Stay Arm,
Programmable*
3
Panic Fire, Panic
(via ProsTE**
Medical, Panic Police,
programming
Siren Check,
4
software)
PGM 1-6 on/off
* Only one function can be set.
** In ProsTE software, "RC Button A" corresponds
to "Button 3" and "RC Button B" - to "Button 4".
*** No function is set by default.
7
Attention: Use only batteries approved by the manufacturer, type CR2450 3V/600mAh!
Remote Control with 4 buttons
Operation Manual
2
– Bicolour (red/green) operation LED
1
– Operation buttons
2
5
Function
PAX RC
Elements
Buttons Lock/Unlock
Battery Replacement
Teletek Electronics JSC
Address: 14A Srebarna Str,
1407 Sofia, Bulgaria
3 LED Indication
Action LED Performance
Pressing a
Single red blink
button
Command
Two green blinks
executed
Command
Two red blinks
rejected
Armed Lighting on in red
Disarmed Lighting on in green
Flashing in yellow every time
after key pressing, as this
Low Battery
indication is with high priority
preceding all others.
6 Resetting
Attention: Before performing reset, first
delete the remote control from its current
position in the panel.