Advertisement
Quick Links
Instruction Manual
Model:
PAX2125-M2-EU
CORDLESS ANGLE GRINDER
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION: Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
English
Advertisement
Related Manuals for Senix PAX2125-M2-EU
Summary of Contents for Senix PAX2125-M2-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU...
- Page 2 Never modify the plug in any way. Do fire. They will explode and cause not use any adapter plugs with earthed injury. (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock. Keep bystanders a safe distance EN - 2 SENIX.COM.AU...
- Page 3 Use the power tool, accessories, tool enables better control of the power tool in bits, etc. by these instructions, taking unexpected situations. into account the working conditions Dress properly. Do not wear loose and the work to be performed. Use of 3 - EN SENIX.COM.AU...
- Page 4 Accessories that do not match the mounting hardware of the power tool will WARNING! run out of balance, vibrate excessively and Use only SENIX X2 batteries (B20X2/B25X2/ may cause loss of control. B40X2/B50X2/B60X2/B80X2) and chargers Do not use a damaged accessory. Before (CHX2/CHQX2/CHQX2-M-EU/CHDX2-M-EU).
- Page 5 Use special care when working corners, Regularly clean the power tool’s air sharp edges etc. Avoid bouncing and vents. The motor’s fan will draw the snagging the accessory. Corners, sharp dust inside the housing and excessive 5 - EN SENIX.COM.AU...
- Page 6 VIBRATION + NOISE REDUCTION To reduce the impact of noise and vibration emission, limit the time of operation, use low- vibration and low-noise operating modes as EN - 6 SENIX.COM.AU...
- Page 7 KNOW YOUR UNIT APPLICATIONS Model: PAX2125-M2-EU As an angle grinder: Cutting and grinding metal, concrete or tiles. Auxiliary Handle Grinding Wheel Guard Guard Clamping Lever Grinding Wheel Spindle Lock Locking Slide Switch Overmold Grip Area 7 - EN SENIX.COM.AU...
- Page 8 SPECIFICATIONS* WARNING: Model PAX2125-M2-EU Wear protective gloves for this assembly work and always lay the Rated Voltage 18 V (20 V Max*) product on a flat and stable surface while assembling. No Load Speed (RPM) 8500 RPM Follow the assembly instructions step-by-step and use the pictures Max.
- Page 9 Fig. 4 assistance of wrench while pressing the spindle lock. OPERATION NOTE: WARNING: For cutting, match concave surface to the cutting wheel. Always wear eye, hearing, hand protection to reduce the risk of injury when operating the 9 - EN SENIX.COM.AU...
- Page 10 Lift the grinder away from the workpiece occurs, remove the battery from the tool and before turning off the grinder. charge the battery. Turn off the tool and make sure it comes 1to a complete stop before laying it down. GRINDING EN - 10 SENIX.COM.AU...
- Page 11 NOTE: Do not use chemical, alkaline, abrasive, or other aggressive detergents or disinfectants to clean this product as they might be harmful to its surfaces. TRANSPORTATION 1. Only carry by its handle. 11 - EN SENIX.COM.AU...
- Page 12 Product does not reach full power Battery pack reaches its life cycle Replace with new battery pack Wheel accessory is dull/damaged Replace with new one Unsatisfactory result Wheel accessory not suitable for Use proper one intended operation EN - 12 SENIX.COM.AU...
Need help?
Do you have a question about the PAX2125-M2-EU and is the answer not in the manual?
Questions and answers