Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SUPERFUN S1-A
Summary of Contents for SUPERFUN S1-A
- Page 1 Model:S1-A USER MANUAL...
-
Page 3: Table Of Contents
Contents 1. Riding Safety 2. Paking List 3. Diagram 4. Assembling Your S1-A 5. First Ride 6. Charging 7. Learning to Ride 8. Warnings 9. Folding and Carrying 10. Specifications 11. Maintenance 12. Certifications 13. Trademark and Legal 14. Contact... - Page 4 Thanks for choosing the S1-A! Thanks for choosing the S1-A! (hereinafter referred to as S1-A)! The scooter is especially designed for smooth and safe riding. It combines the power of electricity and the style of a traditional scooter. Enjoy an effortless gliding experience on this cool, ultra-lightweight and easy to fold scooter.
-
Page 5: Riding Safety
S1-A via the E-scooter App and call your dealer/distributor for service. Be alert! Scan both far ahead and in front of your S1-A-your eyes are your best tool for safely avoiding obstacles and low traction surface(including,but not limited to,wet ground,loose sand,loose... - Page 6 10.Do not attempt to charge your S1-A if the charger,or the power outlet is wet. As with any electronic device,use a surge protector when charging to help protect your S1-A from damage due to power surges and voltage spikes. Only use we supplied charger. Do not use a charger from any other different product models.
-
Page 7: Packing List
2 Packing List Assembled S1-A When unpacking your S1-A, please verify that the above items are included in the package. lf you are missing any components, please contact your dealer/distributor or nearest service center (see Contact in the user manual). Afterverifying that all components are present and in good condition, you can assemble your S1-A. -
Page 8: Diagram
Power Button:Long Press the button for 3-5 seconds to turn the S1-A on; and long press and hold the button for 3-5 seconds to turn the S1-A off.When the S1-A is on, one-click the button to switch speed modes (E-10pm/h,D=15pm/h,S=19pm/h) , and quickly double-click the button to turn the headight on/off.Quickly press the button three times to... -
Page 9: Assembling Your S1-A
2.Attach the handlebar to the stem it.Then unfold the S1-A to support the S1-A. Headlight toward front 3.Install "M5 Flathead Screw x4" 4.Verify that your S1-A can be powered on and off. screws (two on each side)with the included hex wrench. -
Page 10: First Ride
The Bluetooth icon will stop blinkingand remain illuminated. At this time, you can set the kilometer/mile and user password to lock/unlock you S1-A scooter; you can turn on or off the cruise control and non-zero start (after turning off the non-zero start, the scooter does not need assistance when riding .You can start riding directly). -
Page 11: Charging
Close the charge port cover when not charging. 7 Learning to Ride Wear an approved helmet and other protective 1.Power on the S1-A and check the power level gear to minimize any possible injury. indicator.Charge the S1-A if the battery level is low. -
Page 12: Warnings
Maintain a moderate speed and look out for potential hazards. WARNING 8 Warnings Failure to follow these instructions could lead to serious injury. DO NOT ride the S1-A in the rain. DO NOT ride over speed bumps, thresholds, DO NOT get wet. or other bumps at HIGH SPEED. - Page 13 Avoid contacting obstacles with the the S1-A. tire/wheel. DO NOT carry heavy objects on the DO NOT ride the S1-A with only one foot. handlebar. DO NOT ride on public roads, motorways, DO NOT ride on public roads, motorways, or highways.
- Page 14 DO NOT ride through puddles or other The S1-A is for one rider only. DO NOT carry bodies of water. any passengers. DO NOT carry a child. DO NOT ride when pregnant. DO NOT touch the hub motor after riding DO NOT take your hands off the handlebar because it can get hot.
-
Page 15: Folding And Carrying
Release the clasp from the clasp, extend the lever hook up, pull the folding latch upward, and finally tighten the folding latch. outward with force, and fold the release lever. Carrying When your S1-A is folded up, lift it by the stem to carry. -
Page 16: Specifications
10 Specifications Item S1-A Net Weight Approx.30.86 lbs (14kg) Weight and Approx.42.5×6.7×47.2 in Length × Width × Height (1080× 170 × 1200 mm) Size Folded (Length × Width × Approx.42.5×17.7×19.6 in Height) (1080 × 450 × 500 mm) Payload 66.1–220.5 lbs ( 30–100 kg) -
Page 17: Maintenance
S1-A with a power washer or hose. WARNING Make sure the S1-A is powered OFF, the power cord is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning: otherwise you may damage the electronic components. - Page 18 WARNING Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials. Store indoors when not in use. Keep way from fire! WARNING For intormation about battery and electrical waste, please contact your household waste disposal service, your local or regional waste management office, or your point-of-sale. Do not attempt to replace or disassemble the battery.
-
Page 19: Certifications
We have attempted to include description and instructions for all the functions of the EKick Scooter S1-A at time of printing.However, due to constant improvement of product features and changes of design, your scooter may differ slightly from the one shown in this document. -
Page 20: Contact
14261 Proctor Ave , La Puente, CA 91746 Technical Support Email: support@superfunebike.com Have your scooter serial number or order number on hand when contacting superfun. You can find the serial number on the back of your scooter. SuperRide.SuperFun,follow us with superfunebike.com...
Need help?
Do you have a question about the S1-A and is the answer not in the manual?
Questions and answers