Subscribe to Our Youtube Channel
Related Manuals for Beijer Electronics GT-1258
Summary of Contents for Beijer Electronics GT-1258
- Page 1 User Manual GT-1258 Digital Input Module 8 ch, proximity sensor type, 24 VDC, 18 pt removable terminal (detecting open/short/on-off states), 18 pt removable terminal Doc ID: 83709 2025-02-20...
- Page 2 The information in this document is subject to change without notice and is provided as available at the time of printing. Beijer Electronics AB reserves the right to change any information without updating this publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this document.
- Page 3 9.1. Space Requirements ................16 9.2. Mount Module to DIN Rail ..............17 9.3. Mount Removable Terminal Block ............. 19 9.4. Connect Cables to Removable Terminal Block ..........20 9.5. Field Power and Data Pins ..............21 Beijer Electronics, Doc ID: 83709 2025-02...
- Page 5 About This Manual 1. About This Manual This manual contains information on the software and hardware features of the Beijer Electronics GT-1258 Digital Input Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product. 1.1. Symbols Used in This Manual This publication includes Warning, Caution, Note and Important icons where appropriate, to point out safety-related, or other important information.
- Page 6 Before using this product, please read this manual and other relevant manuals carefully. Pay full attention to safety instructions! In no event will Beijer Electronics be responsible or liable for damages resulting from the use of this product. The images, examples and diagrams in this manual are included for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Beijer Electronics cannot take responsibility or liability for actual use based on the examples and diagrams.
- Page 7 IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc. • Expansion Module - Expansion module types: Digital IO, Analog IO, and Special modules. • Messaging - The system uses two types of messaging: Service messaging and IO messaging. Beijer Electronics, Doc ID: 83709 2025-02...
- Page 8 Valid parameter data depends on the modules in use. For example, analog modules have settings of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data. 2025-02 Beijer Electronics, Doc ID: 83709...
- Page 9 Voltage range: 15 - 30 VDC Power dissipation: 15 mA + load @ 24 VDC Wiring I/O cable max. 0.75 mm² (AWG 18) Weight 64 g Module size 12 mm x 109 mm x 70 mm Beijer Electronics, Doc ID: 83709 2025-02...
- Page 10 Signal current (0) I ≤ 1.5 mA Signal current (1) I ≥ 4.5 mA Diagnostics Short-circuit, open-circuit Max. switching frequency 1 kHz Input filter 10 ms Nominal input impedance 3.2 kΩ typical 2025-02 Beijer Electronics, Doc ID: 83709...
- Page 11 Input channel 6 Sensor supply channel 0 (Uv 6 / 24 V) Input channel 7 Sensor supply channel 0 (Uv 7 / 24 V) Common (Field power 0 V) Common (Field power 24 V) Beijer Electronics, Doc ID: 83709 2025-02...
- Page 12 IN LED no. 0 - 7 (left) Status Indication No signal No input signal On signal Green Normal operation ERR LED no. 0 - 7 (right) Status Indication No signal Normal operation On signal Green Short-circuit or open-circuit 2025-02 Beijer Electronics, Doc ID: 83709...
- Page 13 IN 0 Byte 1 DIA 7 DIA 6 DIA 5 DIA 4 DIA 3 DIA 2 DIA 1 DIA 0 When sensor type NO (“Normally Open”, make contact) is enabled, the following logic applies: Beijer Electronics, Doc ID: 83709 2025-02...
- Page 14 Input byte 0 (0 ... Input byte 1 (0 ... 7) Explanation Signal status Short circuit / Wire break Contact closed or sensor in “conductive” status Short circuit Contact open or sensor in “blocking” status Wire (line) break 2025-02 Beijer Electronics, Doc ID: 83709...
- Page 15 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Byte NC_ENA NC_ENA NC_ENA NC_ENA NC_ENA NC_ENA NC_ENA NC_ENA Byte DIA_DIS DIA_DIS DIA_DIS DIA_DIS DIA_DIS DIA_DIS DIA_DIS DIA_DIS Beijer Electronics, Doc ID: 83709 2025-02...
- Page 16 Installation position is valid vertical and horizontal. The drawings are illustrative and may be out of proportion. CAUTION NOT following the space requirements may result in damaging the product. 2025-02 Beijer Electronics, Doc ID: 83709...
- Page 17 • GT-5XXX • GT-7XXX GN-9XXX modules have three locking levers, one at the bottom and two on the side. For mounting instructions, refer to Mount GN-9XXX Module. Mount to DIN rail Dismount from DIN rail Beijer Electronics, Doc ID: 83709 2025-02...
- Page 18 9.2.2. Mount GN-9XXX Module To mount or dismount a network adapter or programmable IO module with the product name GN-9XXX, for example GN-9251 or GN-9371, see the following instructions: Mount to DIN rail Dismount from DIN rail 2025-02 Beijer Electronics, Doc ID: 83709...
- Page 19 Hardware Setup 9.3. Mount Removable Terminal Block To mount or dismount a removable terminal block (RTB), see the instructions below. Mount a removable terminal block Dismount a removable terminal block Beijer Electronics, Doc ID: 83709 2025-02...
- Page 20 To connect/disconnect cables to/from the removable terminal block (RTB), see the instructions below. WARNING Always use the recommended supply voltage and frequency to prevent damage to the equipment and ensure optimal performance. Connect cable Disconnect cable 2025-02 Beijer Electronics, Doc ID: 83709...
- Page 21 Token output port of processor module Serial output Transmitter output port of processor module Serial input Receiver input port of processor module Reserved Reserved for bypass token Field GND Field ground Field VCC Field supply voltage (24 VDC) Beijer Electronics, Doc ID: 83709 2025-02...
Need help?
Do you have a question about the GT-1258 and is the answer not in the manual?
Questions and answers