Advertisement
Quick Links
Instruction Manual
LITHIUM-ION BATTERY CHARGER
CHX2/CHQX2
CAUTION: Before using this tool, please read this manual completely,
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
CHDX2-M-EU DUAL PORT CHARGER
Model:
CHQX2-M-EU QUICK CHARGER
CHX2
CHQX2
CXQX2-M-EU
CHDX2-M-EU
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
English
Advertisement
Related Manuals for Senix CHX2
Summary of Contents for Senix CHX2
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com English...
-
Page 2: Table Of Contents
Protection Class II. battery charger and battery. The charger must be only used to charge SENIX X2 batteries: B20X2, B25X2, B40X2, Remove plug from the mains B50X2, B60X2 and B80X2. immediately if the power cord/ Non- rechargeable batteries cannot be extension cord is damaged or cut. -
Page 3: Other Warnings
A defective charger must be treated as special waste / hazardous waste. Put it in a special collection point. Do not throw it in the normal household waste neither into water or fire. 3 - EN SENIX.COM.AU... -
Page 4: Know Your Unit
KNOW YOUR UNIT CHX2/CHQX2 CHQX2-M-EU EN - 4 SENIX.COM.AU... - Page 5 CHDX2-M-EU Model: CHX2, CHQX2, CHQX2-M-EU & CHDX2- M-EU. Use this charger for X2 battery pack only. Electrical contacts Battery Docking Port Charge Status Indicator Lights Power cord Wall mounting hole 5 - EN SENIX.COM.AU...
-
Page 6: Specifications
SPECIFICATIONS* Model CHX2 CHQX2 CHQX2-M-EU CHDX2-M-EU 100-240V ~ 50/60 Hz Rated Input Voltage Rated Output 21 V , 2 A 21 V , 4 A 21 V , 4 A or 6 A Output Voltage 21 V Charging Current 2A Max... -
Page 7: Operation
18°C Vertical: Install two nails vertically with - 24°C. Do not charge the battery pack 50.8 mm (CHX2/CHQX2), 101.5 mm in air temperatures below 4°C, or above (CHDX2-M-EU), 76.2 mm (CHQX2-M-EU) 40°C. This is important as it can prevent apart on the wall, fit the charger holes serious damage to the battery pack. -
Page 8: Environmental Protection
• Protect the charger from any heavy impact or strong vibrations which may occur EN - 8 SENIX.COM.AU... -
Page 9: Trouble Shooting
If the flashing One red light flashes Abnormal charging red light persists, have the charger checked by an authorized service dealer. If further assistance is required, take the unit to a qualified service dealer. 9 - EN SENIX.COM.AU...
Need help?
Do you have a question about the CHX2 and is the answer not in the manual?
Questions and answers