Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Metallkraft AS 1400
- Page 1 Operating Instructions Extraction unit AS 1400 AS 1400...
-
Page 2: Table Of Contents
Passing on as well as copying of this document, the use and distribution of its content are prohibited if not expli- citly permitted. Contraventions are liable to compensa- tion. Subject to technical modifications and error. AS 1400 | Version 1.06... -
Page 3: Introduction
This combination of symbol and signal words indi- cate a possibly dangerous situation which may lead to death or severe injuries if they are not avoided. AS 1400 | Version 1.06... -
Page 4: Intended Use
- The operator must have all safety devices checked stem, the company Stürmer Maschinen GmbH assumes regularly for their good working order and their in- no liability. tegrity. Claims of any kind due to damage due to improper use are excluded. AS 1400 | Version 1.06... -
Page 5: Requirements To Staff
Other personnel is not au- switch. thorized to perform these works. Please contact our cus- tomer service for the execution of all arising work. AS 1400 | Version 1.06... -
Page 6: Safety Signs On The Extraction Unit
- Suction hose Ø 75 mm / 2m Item number: 3922013 - Replacement filter Item number: 3922014 3.3 Type plate Fig. 2: Type plate AS 1400 Transport, packing, storage Fig. 1: Safety signs The safety markings which are applied on the machine 4.1 Delivery must not be removed. -
Page 7: Storage
Danger to life due to electric shock! Work on the electrical connection may only be car- ried out by qualified electricians. Fig. 3: Description AS 1400 Make sure that the power connection has the same cha- racteristics (voltage, mains frequency, phase position) as the motor (see nameplate). -
Page 8: Commissioning
Step 1: Check that the suction hose is firmly connected required. to the extraction unit and to the extraction adap- Under no circumstances may the device be modified ter of the metalworking machine. without permission. AS 1400 | Version 1.06... -
Page 9: Cleaning Of The Extraction Unit
Used cooling lubricant emulsions and oils should not be mixed, as only unmixed waste oils can be used without pretreatment. The disposal instructions for the lubricants used are pro- vided by the lubricant manufacturer. If necessary, ask for the product-specific data sheets. AS 1400 | Version 1.06... -
Page 10: Spare Parts
Spare parts Spare parts Example The filter for the Extraction unit AS 1400 must be or- DANGER! dered. The filter has the number 6 in the spare parts dra- Risk of injury due to the use of wing 1. wrong spare parts! -
Page 11: Spare Parts Drawing
In case of service, the following drawing shall help to identify the necessary spare parts. If necessary, send a copy of the parts drawing with the marked components to your authorised dealer. Back side Front side Fig. 4: Spare parts drawing AS 1400 AS 1400 | Version 1.06... -
Page 12: Electrical Wiring Diagram
Electrical wiring diagram 10 Electrical wiring diagram Fig. 5: Wiring Diagram AS 1400 AS 1400 | Version 1.06... - Page 13 Electrical wiring diagram Black Switch Fig. 6: Wiring Diagram AS 1400 AS 1400 | Version 1.06...
-
Page 14: Ec Declaration Of Conformity
DIN EN 60204-1:2019-06 DIN EN 60204-1:2007-06Safety of machinery. Electrical equipment of machines. Specification for general requirements Responsible for documentation: Kilian Stürmer, Stürmer Maschinen GmbH, Dr.-Robert-Pfleger-Str. 26, D-96103 Hallstadt Hallstadt, 24.02. 2021 ______________________ Kilian Stürmer Manager AS 1400 | Version 1.06... -
Page 15: Notes
Notes 12 Notes AS 1400 | Version 1.06... - Page 16 www.metallkraft.de...
Need help?
Do you have a question about the AS 1400 and is the answer not in the manual?
Questions and answers