Summary of Contents for Norden NVS-UC600055CA
- Page 1 NVS-UC600055CA PTZ CONFERENCE CAMERA 20x OPTICAL ZOOM 2.10MP HDMI, SDI&USB User Manual www.nordencommunication.com www.nordencommunication.com...
- Page 2 www.nordencommunication.com...
-
Page 3: Table Of Contents
Contents Product Overview………………………………………………………………………………………………….3 • Description……………………………………………………………………………………………………..3 • Features………………………………………………………………………………………………………….3 Product Appearance………………………………………………………………………………………………4 • Front Panel……………………………………………………………………………………………………..4 • Rear Panel…………………………………………………………………………….………………………..4 • Remote Control………………………………………………………………………………………………5 Camera Menu Setup………………………………………………………………………………………………6 • Menu………………………………………………………………………………………………………………6 • Exposure…………………………………………………………………………………………………………6 • Color……………………………………………………………………………………………………………….7 • Image……………………………………………………………………………………………………………..9 • P/T/Z…………………………………………………………………………………………………………….10 • Communication Setup ………………………………………………………………………………….10 • Information…………………………………………………………………………………………………..11 • Restore Default…………………………………………………………………………………………….11 Common Operation Instructions………………………………………………………………………….11 Network Function………………………………………………………………………………………………..14 Installation Instructions……………………………………………………………………………………….21... -
Page 4: Product Overview
Product Overview Description The NVS-UC600055CA is a PTZ conference Camera with 20x optical zoom 2.10MP HDMI, SDI and USB. Even in low light or the extreme contrast of brightness and darkness in a conference room, the superior 20x optical zoom lens, outstanding white balance, and exposure mode delivers a clear image. -
Page 5: Product Appearance
Product Appearance Front panel Rear Panel www.nordencommunication.com... -
Page 6: Remote Control
Remote Control Button Note : 1. Please check whether the indicator corresponding to the camera selection area is on or not. 2. If the remote control does not work, please replace the batteries. 3. Make sure the number keys on the camera selection area are consistent with the remote-control address in the menu. -
Page 7: Camera Menu Setup
Camera Menu Setup When operating remote control, press MENU to enter main menu of the video camera. 1. Level 1 Menu – Main Menu • Exit Options: Save, Not save, Default. 2. Level 2 Menu – Exposure Mode: Auto/Manual/SAE/AAE/Bright Backlight: On/Off(only effective under Auto mode) Exp Comp: Optional item is -7~+7 (only effective under Auto mode) Flicker: Support 50HZ/60HZ When changing the exposure mode to Manual, the sub-menu is as shown below. -
Page 8: Color
lris: F1.6、F1.85、F2.0、F2.2、F2.63、F3.0、F3.4、F4.0、F6.0、 F8.0、 F10.0、F16.0、F32.0、O ff(Only effective under Manual/AAE mode) Shutter: 1/25、1/30、1/60、1/90、1/100、1/125、1/180、1/250、1/350、 1/500 、1/750、1/1000、1/1500、1/2000、1/3000、1/4000、1/6000、 1/10000 (Only effective under Manual/SAE mode) Exposure Gain: Optional item is 0 to 99 (Only effective under AAE/SAE mode) Bright: Optional item is 0-17 (Only effective under Bright mode) 3. - Page 9 Brightness: Optional item is 0-99 5600 Contrast: Optional item is 0-99 Hue: Optional item is 0-99 Saturation: Optional item is 0-99 Sharpness: Optional item is 0-99 WB mode: Auto/Manual/VAR/Indoor/Outdoor/Onepush When the WB mode is Auto, the Rtuning and Btuning value can be tuning. The range is 0 to 99.
-
Page 10: Image
The Color Temp value is adjustable. The range is from 2500 to 9000. When the WB mode is Indoor/Outdoor/Onepush, the sub-menu will be as shown below: 4. Level 2 Menu-lmage Flip: Enable/disable the picture up/down flip Mirror: Enable/disable the picture left/right flip Video Format: 1080P60/1080P50/1080P30/1080P25/720P60/720P50 USB Mode: ISOC/BULK USB mode: Adjust between isochronous transfers mode and Bulk transfers... -
Page 11: Communication Setup
5. Level 2 Menu- P/T/Z Acc Curve: Fast/Middle/Slow L/R SET: On/Off Zoom Speed: Optional items are 0-7 AF Zone: Bottom/Left/Right/Front/Top/Middle AF Sense: Normal/High/Low AF Scene: Normal/Macro/Live 6. Level 2 Menu – Communication Protocol: Option items are Auto/Visca/PELCO-D/PELCO-P Baud rate: Option items are 2400/4800/9600/38400 RC Address: Set the IR remote control's address to control the corresponding camera. -
Page 12: P/T/Z
Address: Set the camera's address. Option items are 1-7 in Visca, 0-255 in PELCO-D, 0-31 in PELCO-P. 7. Level 2 Menu -Information Model: FHD Camera PTZ Version:1.0.1.1 SOC Version: 1.1.32 AF Version:1.0.1 Notice: The version number here is just an example. The actual parameters shall prevail. - Page 13 2. Camera Direction Control Note: Press the direction key when you need to adjust the angle. If you want to move the camera slowly, just click the direction key; If you want to move the camera fast at a large scale, just long-press the button. 3.
- Page 14 Press any one of the 4 ZOOM to make the zoom functioning. These 4 keys are not applicable for fixed focus cameras. 5. Preset Setup, Call, Cancel • Reserve Preset: Press PRESET then press one of the numbers (0-9) to reserve a preset that correspond to the NUMBER.
-
Page 15: Network Function
7. RS-485 lnterface Distribution Network Function Equipment Installation Connect HD Video camera to your internet on your PC via network cable or connect by Switch/Router. You can log into the camera’s web interface with the default or modified IP.(Different models have different IP, Please check the default IP at the bottom of the camera). How to query the IP address of your PC ( Note the text in box) www.nordencommunication.com... - Page 16 www.nordencommunication.com...
- Page 17 www.nordencommunication.com...
- Page 18 How to add networking: 1) Open the computer network local connection attribute window select "internet Protocol Version 4 :(TCP/Pv4)"; 2) Double-or-right-click "Internet Protocol Version 4 (TCP/Pv4)"; 3) Enter the "internet Protocol Version 4 (TCP/lPv4) "window. 4) Change the computer's lP to 192.168.0.200 so that the computer Select "Setup"...
- Page 19 Modify the camera IP and computer IP on to the same network segment, so that the computer network is not affected. 1) Select "Setup"- "Network Settings"- "Local Network" to enter the following interface: www.nordencommunication.com...
- Page 20 • Change the Camera IP Address to 192.168.110.208 • Default gateway : 192.168.110.254 • Alternate DNS : 192.168.110.7 • Preferred DNS : 192.168.110.8 2) Return PC’s IP to the original IP address and select obtain an IP address automatically Video streaming 1) Select “Setup”...
- Page 21 Configure parameters according to the network environment. lf the camera modified IP address is 192.168.110.208, then the way to get RTSP video streaming as below: Default RTSP main streaming address: rtsp://192.168.110.208:554/live/av0 (av0 Main） Default RTSP sub streaming address: rtsp://192.168.110.208:554/live/av1(av1 Sub） 3) RTMP Video Streaming Select "Setup"...
-
Page 22: Installation Instructions
• Open upgrade file to Upgrade automatically if needed. • Restart the camera and prompts “Upgrade succeeded". Log in to the network and check whether the software version is consistent with the upgrade file to ensure that the upgrading is successful. Then click "Restore factory default"... -
Page 23: Wall-Mount Installation
Wall-mount Installation www.nordencommunication.com... -
Page 24: Specifications
Specifications Model NVS-UC600055CA Sensor Sony IMX327 1/2.8" CMOS Effective Pixels 2.07MP Video Signals 1080p@60/50/30/25fps, 720p@60/50/30/25fps Zoom 20x optical zoom Lens f=5.5-110mm Aperture F1.6-3.5 Horizontal Angle 55.8°(W)-3.2°(T) Vertical Angle 32.2°(W)-1.8°(T) Diagonal Angle 61°(W)-3.64°(T) Video Output USB3.0, HDMI,RJ45, SDI 10M/100M adaptive Ethernet port; Support POE IEEE802.3af... -
Page 25: Troubleshooting
Troubleshooting Before requesting service to service engineer, please refer to the following methods to remove failures. If the failures still can’t be solved, please contact us for assistance. 1. What if the video of the camera cannot be displayed on the screen? Please check the connection between power cable, video cable, camera, and monitor, fix the connector on each end. - Page 26 8. Why there is no ceiling mount bracket? Camera comes with wall mount; ceiling mount or tripod brackets need to buy separately. 9. Does this camera have built-in mic? No, this camera comes with no built-in mic. 10.Can we control the camera only by the remote control? You can control the camera by remote control, keyboard controller (joystick), and software.
Need help?
Do you have a question about the NVS-UC600055CA and is the answer not in the manual?
Questions and answers