HP dc7900 - Convertible Minitower PC Setup And Configuration Manual page 11

Select Provision Model.
16.
a. Change to Intel AMT 1.0 Mode, and then select N.
Default Setting = Intel AMT 3.0 Mode, Recommended Setting = Intel AMT 3.0 Mode
This option is a toggle, and the next time you access it you are prompted with the opposite
setting.
b. Change to Small Business, and the select Y.
Default Setting = Enterprise, Recommended Setting = Small Business
This option is a toggle, and the next time you access it you are prompted with the opposite
setting.
Notice that the Setup and Configuration option is no longer available once the system is in Small
Business mode. This option is only used in Enterprise Mode.
c. Select Return to previous menu.
Skip Un-Provision. This option returns the system to factory defaults.
17.
Skip VLAN.
18.
Default Setting = Disabled, Recommended Setting = User Dependent
This option enables or disables VLAN support. If VLAN is enabled, then you must provide the VLAN
tag (label) (1-4094).
VLAN support is not necessary for AMT or Virtual Appliances. If enabled, it allows the grouping of
systems from different networks into one virtual network.
Select SOL/IDE-R.
19.
a. Select Y in the message window.
b. Select Username and Password, and then select Enabled.
Default Setting = Enabled, Recommended Setting = Enabled
This option allows users and passwords to be added from the WebGUI. If the option is disabled,
then only the administrator has MEBx remote access.
c. Select Serial Over LAN, and then select Enabled.
Default Setting = Enabled, Recommended Setting = Enabled
This option enables/disables Serial Over LAN (SOL) functionality.
d. Select IDE Redirection, and then select Enabled.
Default Setting = Enabled, Recommended Setting = Enabled
This option enables/disables IDE Redirection (IDE-R) functionality.
Select Password Policy.
20.
Default Setting = Default Password Only, Recommended Setting = Default Password Only
11