Advertisement
Advertisement
Table of Contents
Related Manuals for birddog KBD
Summary of Contents for birddog KBD
- Page 1 PTZ Controller USER MANUAL...
-
Page 3: Table Of Contents
USER MANUAL Table of Contents Product Overview Product Interface Description Button Function Description Installation & Setup System & Network Settings Netwok Configuration Trouble shooting... -
Page 4: Product Overview
USER MANUAL 1. Product Overview 1.1 Product Description BirdDog KBD Controller offers PTZ camera operators a rugged, ergonomic design, a large multi-camera display, and direct access to essential functions. With a built-in tally display and physical feedback for camera switching, it’s... -
Page 5: Product Interface Description
USER MANUAL 2. Product Interface Description Name Function Power Power ON/OFF DC12V DC 12V Power Connection (Cable included in box) For updates only Ethernet Ethernet /NDI/ RJ-45 (PoE) Network Connection Supports 802.3af PoE power RS485 / RS422 Supports VISCA/PELCO-D/PELCO-P with full compatibility RS232 Supports VISCA/PELCO-D/PELCO-P... - Page 6 Camera and keyboard need to be connected to the same LAN. Connect the camera and the KBD to the same LAN and ensure both devices are assigned IP address- es within the same network segment. For example, IP addresses like 192.168.1.123 and 192.168.1.111 are in the same segment, while 192.168.1.123 and 192.168.0.125 are not.
- Page 7 Connect the first pin (RXD) of the KBD’s 10-pin terminal to the camera’s TXD input. Connect the second pin (TXD) of the KBD to the camera’s RXD input. The third pin of the KBD should be connect- ed to the camera’s GND. Alternatively, you can use the standard RS-232 interface (DB9) on the KBD to connect to the camera.
-
Page 8: Button Function Description
USER MANUAL 3. Button Function Description 3.1 Button Descriptions [PT Speed]: Twist the Speed Control knob in to cycle to increase or decrease the PT Speed. PT Speed Range: 1-8. [Zoom Speed]: Twist the Speed Control knob in to cycle to increase or decrease the Zoom Speed. Zoom Speed Range: 1-8. - Page 9 USER MANUAL [AI CONFIRM]: Confirm the human target for AI Tracking. When target is confirmed AI Tracking box will change from BLUE to GREEN. [NEAR]: Near Focus: Pressing the [NEAR] button makes objects closer to the camera and appear clearer. Long pressing will continuously adjust the focus to near. [FAR]: Far Focus: Pressing the [FAR] button makes objects farther from the camera and appear clear- er.
-
Page 10: Installation & Setup
NAR/FAR Focus: Turn the joystick to the right (+) and to the left (-). Press the joystick: no function. Joystick clockwise/Joystick counterclockwise: Zoom +/Zoom -. Addable seesaw: T = Zoom In; W = Zoom Out. Joystick top button: Confirmation button (also configurable in the Control tab of the KBD BirdUI.) 4. Installation & Setup 4.1 Add Analogue Device Adding a analogue device directly from the KBD display. - Page 11 Previous Next Delete Edit 2) Manually add the device Note: Ensure that the camera and KBD are in the same IP address segment. For example: • Camera IP address: 192.168.0.22 • KBD address: 192.168.0.180 Input the channel, protocol, camera IP address, port, and the camera's username and password.
- Page 12 4.3 Search Device When several cameras are in the same segment of the KBD, you can use Search Device to add cam- eras. Use joystick to move to the right and highlight [Search] and press [Enter] to initiate the search.
-
Page 13: System & Network Settings
5. System & Network Settings System Set • In the System Set menu, the current firmware version of the KBD will be displayed in the [Version] field. • Selecting Factory Reset will restore the KBD to its default settings, including deleting all added devices. -
Page 14: Netwok Configuration
6. 1 Access & Configure BirdUI 1) Connect the power cable and network cable to the KBD. Once the KBD startup is complete, if you don’t already know the IP address, navigate to the Network Set tab in the Setup menu on the KBD. - Page 15 4) Click to modify the device parameters. Input the device number, corresponding IP address, port number and user name and click save. Note: When entering the KBD BirdUI to add a device successfully, which will be displayed on the display of the KBD. After adding the device on the web interface successfully, click the correspond- ing [CAMx] button on the KBD, or by selecting [CAM ID] and the corresponding number to gain control of desired camera.
- Page 16 BirdDog.tv Dynamic Address (DHCP) (Default Acquisition Method) The KBD will automatically request an IP address from the router. Once the request is successful, the assigned IP address will be displayed on the KBD screen in the format: "Local IP: 192.168.x.xxx".
-
Page 17: Troubleshooting
USER MANUAL 6.2.3 Restart & Version Pressing [RESTART] will reboot the KBD. The Firmware Version will display the current firmware applied to the KBD, matching the name of the firmware file used. 7. Troubleshooting KBD Display shows red text. This can occur when the controller doesn’t receive a response from the camera. - Page 18 BirdDog.tv...
Need help?
Do you have a question about the KBD and is the answer not in the manual?
Questions and answers