Advertisement

Quick Links

4G LTE ROUTER 300 V2 / 4G LTE ROUTER
300
4GROUTER300V2 / 4GROUTER300

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4G LTE ROUTER 300 V2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Strong 4G LTE ROUTER 300 V2

  • Page 1 4G LTE ROUTER 300 V2 / 4G LTE ROUTER 4GROUTER300V2 / 4GROUTER300...
  • Page 2: Table Of Contents

    1.1.4.2. WPS Settings ------------------------------------------------------------------------ 66 1.1.4.3. MAC Filter ---------------------------------------------------------------------------- 71 1.1.5. Advanced Settings ----------------------------------------------------------------------- 75 1.1.5.1. Network Mode ---------------------------------------------------------------------- 75 1.1.5.2. Channel Bandwidth --------------------------------------------------------------- 78 1.1.5.3. Frequency (Channel) -------------------------------------------------------------- 81 Copyright © STRONG 2024. All Rights Reserved. 2 / 126...
  • Page 3 1.1.1. Time Setting ------------------------------------------------------------------------------ 115 1.1.2. Network Tools ---------------------------------------------------------------------------- 118 1.1.2.1. Trace ---------------------------------------------------------------------------------- 118 1.1.2.2. Ping ----------------------------------------------------------------------------------- 119 1.1.3. System Upgrade ------------------------------------------------------------------------ 122 1.1.4. Reboot ------------------------------------------------------------------------------------- 124 VII. Accessing the FAQs ------------------------------------------------------------------------------------ 125 Copyright © STRONG 2024. All Rights Reserved. 3 / 126...
  • Page 4: Introduction

    On the front side of the device, you can see a few LEDs that give you information about the status of the network, Wi-Fi, WPS, etc. Let’s see the different meanings of these LEDs in detail, in the following picture. Copyright © STRONG 2024. All Rights Reserved. 4 / 126...
  • Page 5 4GROUTER300/4GROUTER300V2 - User Guide 5 / 126 Copyright © STRONG 2024. All Rights Reserved. 5 / 126...
  • Page 6: Presentation Of The Web Ui

    Firewall: where you can set up security parameters.  System Settings: where you can update, reboot or edit your settings. In addition, you can also see the status of the Wi-Fi network, Mobile Network and data. Copyright © STRONG 2024. All Rights Reserved. 6 / 126...
  • Page 7: Configuring Your Device And Network

    If your SIM card is micro or nano, please place the SIM card in the adapter provided in the package. To place your SIM card in the dedicated slot, you must remove the plastic cover of the slot. Then your SIM card must be placed as follows: Copyright © STRONG 2024. All Rights Reserved. 7 / 126...
  • Page 8 4GROUTER300/4GROUTER300V2 - User Guide 8 / 126  Case 1: Micro SIM Card  Case 2: Nano SIM Card Copyright © STRONG 2024. All Rights Reserved. 8 / 126...
  • Page 9: Placing The Antennas

    2. Placing the antennas After installing your SIM card, you must remove the cover located on the top rear side of your device to place the two external antennas as follows: Copyright © STRONG 2024. All Rights Reserved. 9 / 126...
  • Page 10: Switching On The Device

    3. Switching on the device After that, you must insert the power cable in the power hole (A) and plug it into the outlet (B). Then press the Power button (C) Copyright © STRONG 2024. All Rights Reserved. 10 / 126...
  • Page 11 4GROUTER300/4GROUTER300V2 - User Guide 11 / 126 After a few seconds, the LEDs located on the front side of the device are lit if the sim card is unlocked. Copyright © STRONG 2024. All Rights Reserved. 11 / 126...
  • Page 12 In this case, you will need to connect to the Web UI of the device to unlock it. You can either access the Web UI after connecting your computer to the router with the RJ45 cable or to the Wi-Fi of the router after typing this IP Address: 192.168.0.1. Copyright © STRONG 2024. All Rights Reserved. 12 / 126...
  • Page 13: Connecting Your Device With An Ethernet Cable And Accessing The Web Ui

    Then you can access the Web UI by typing this IP Address in your browser: Copyright © STRONG 2024. All Rights Reserved. 13 / 126...
  • Page 14 4GROUTER300/4GROUTER300V2 - User Guide 14 / 126 You will need to click the Login link on the page that opens: Next, you must enter the Username and Password. Click Login. Copyright © STRONG 2024. All Rights Reserved. 14 / 126...
  • Page 15: Connecting To The Wi-Fi And Accessing The Web Ui

    To connect to the Wi-Fi, look at the rear side of your router and locate the sticker where the SSID and Password are written. Then, enter the information in your device. Then enter the following IP address in your browser: 192.168.0.1 Copyright © STRONG 2024. All Rights Reserved. 15 / 126...
  • Page 16 After that, you will need to click the login link on the page that appears. A new page opens in which you must enter the Username and Password before clicking the Login button. Copyright © STRONG 2024. All Rights Reserved. 16 / 126...
  • Page 17 Changing the administrator password in the Web UI. Once you are connected to the Web UI, you will see the home page: Copyright © STRONG 2024. All Rights Reserved. 17 / 126...
  • Page 18: Changing The Administrator Password In The Web Ui

    Once this is done, click the System Settings tab and select System Setting. Click Modify Password and enter the following information:  Current Password: Enter the current password.  New Username: Enter the new username. Copyright © STRONG 2024. All Rights Reserved. 18 / 126...
  • Page 19 4GROUTER300/4GROUTER300V2 - User Guide 19 / 126  New Password: Enter the new password.  Confirm New Password: Enter the same password as in the previous field. Click Apply. Copyright © STRONG 2024. All Rights Reserved. 19 / 126...
  • Page 20 4GROUTER300/4GROUTER300V2 - User Guide 20 / 126 When the details are saved, the following pop-up message appears: When the details are saved, the following pop-up message appears: Copyright © STRONG 2024. All Rights Reserved. 20 / 126...
  • Page 21: Entering Your Pin Code In The Web Ui

    Wi-Fi of the device and access the Web UI. Enter your PIN code in the field and click Apply. The SIM card is unlocked, and its icon now turns green with the network name next to it. Copyright © STRONG 2024. All Rights Reserved. 21 / 126...
  • Page 22: Enabling/Disabling The Wi-Fi

    To do so, you must connect to the Web UI by using an Ethernet cable by following this procedure. Then, click Device Settings and after that select Wi-Fi Settings. In Wi-Fi Settings, select Wi-Fi Switch. Then, click the Disabled box and the Apply button. Copyright © STRONG 2024. All Rights Reserved. 22 / 126...
  • Page 23: Editing The Apn Settings

     Connecting to the Wi-Fi and Accessing the Web UI.  Connecting your Device with an Ethernet Cable and Accessing the Web UI Click Device Settings and then Internet Settings. Copyright © STRONG 2024. All Rights Reserved. 23 / 126...
  • Page 24 4GROUTER300/4GROUTER300V2 - User Guide 24 / 126 Click APN. Copyright © STRONG 2024. All Rights Reserved. 24 / 126...
  • Page 25 4GROUTER300/4GROUTER300V2 - User Guide 25 / 126 Copyright © STRONG 2024. All Rights Reserved. 25 / 126...
  • Page 26 If the information is incorrect, click Manual and Add New. In the PDP Type field, select the correct APN Type between IPv4, IPv6 or IPv4v6. We suggest to always select IPv4 as your PDP Type. Copyright © STRONG 2024. All Rights Reserved. 26 / 126...
  • Page 27 4GROUTER300/4GROUTER300V2 - User Guide 27 / 126 Copyright © STRONG 2024. All Rights Reserved. 27 / 126...
  • Page 28 Then enter the APN address in the APN field. Select the Authentication Type defined by your provider for your APN between the following values and click Apply: NONE,   CHAP  Copyright © STRONG 2024. All Rights Reserved. 28 / 126...
  • Page 29: Activating The Wps

    Press the WPS button for 2 seconds to allow any compatible device in your home to automatically to connect to the Wi-Fi network of the router. Once it is activated, the horizontal arrows will blink in blue Copyright © STRONG 2024. All Rights Reserved. 29 / 126...
  • Page 30 4GROUTER300/4GROUTER300V2 - User Guide 30 / 126 Go to the Wi-Fi settings of your computer and click on the name of the router to select it. Then, click the connect button. Copyright © STRONG 2024. All Rights Reserved. 30 / 126...
  • Page 31: Resetting The Device To Its Factory Configuration

    To do so, insert a paper clip in the hole to press the reset button. Press the reset button for 10 seconds. The LEDs will switch off and turn back on again. Copyright © STRONG 2024. All Rights Reserved. 31 / 126...
  • Page 32 4GROUTER300/4GROUTER300V2 - User Guide 32 / 126 Copyright © STRONG 2024. All Rights Reserved. 32 / 126...
  • Page 33 Ethernet Cable and Accessing the Web UI Connecting to the Wi-Fi and Accessing the Web Then, click System Settings and select System Setting. Click Restore Factory Setting and then click Reset Factory Settings. Copyright © STRONG 2024. All Rights Reserved. 33 / 126...
  • Page 34 4GROUTER300/4GROUTER300V2 - User Guide 34 / 126 Click Yes on the pop-up message that appears. Copyright © STRONG 2024. All Rights Reserved. 34 / 126...
  • Page 35 4GROUTER300/4GROUTER300V2 - User Guide 35 / 126 A new pop-up appears while the device is reset to its factory settings. Copyright © STRONG 2024. All Rights Reserved. 35 / 126...
  • Page 36: Using The Web Ui

    Connecting to the Wi-Fi and Accessing the Web UI Then, click on Device Settings and on the Advance Settings tab. Click PIN Management and select Disabled. Then, enter the Current PIN code and click Apply. Copyright © STRONG 2024. All Rights Reserved. 36 / 126...
  • Page 37: Changing The Pin Code

    Connecting to the Wi-Fi and Accessing the Web UI  Connecting your Device with an Ethernet Cable and Accessing the Web UI Then, click on Device Settings and on the Advance Settings tab Copyright © STRONG 2024. All Rights Reserved. 37 / 126...
  • Page 38 4GROUTER300/4GROUTER300V2 - User Guide 38 / 126 Click PIN Management and Change PIN. Enter the following information and click Apply: Copyright © STRONG 2024. All Rights Reserved. 38 / 126...
  • Page 39: Changing The Ssid (Wi-Fi Network Name) And Password

    After setting up your device and connecting to it for the first time, it is possible for you to change the SSID, also known as the name of your Wi-Fi Network and its password. Copyright © STRONG 2024. All Rights Reserved. 39 / 126...
  • Page 40 Connecting your Device with an Ethernet Cable and Accessing the Web UI To do so, click Quick Settings in the top bar. Then enter your new network name and click Next. Copyright © STRONG 2024. All Rights Reserved. 40 / 126...
  • Page 41 4GROUTER300/4GROUTER300V2 - User Guide 41 / 126 Click Display Password. Change your password. Then click Next. Copyright © STRONG 2024. All Rights Reserved. 41 / 126...
  • Page 42 4GROUTER300/4GROUTER300V2 - User Guide 42 / 126 To save the changes, click Apply. Write your new SSID and password on a paper and tape it to the router. Copyright © STRONG 2024. All Rights Reserved. 42 / 126...
  • Page 43  Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Device Settings and select Wi-Fi Settings. Copyright © STRONG 2024. All Rights Reserved. 43 / 126...
  • Page 44 4GROUTER300/4GROUTER300V2 - User Guide 44 / 126 Then select SSID Settings. Copyright © STRONG 2024. All Rights Reserved. 44 / 126...
  • Page 45 4GROUTER300/4GROUTER300V2 - User Guide 45 / 126 Change the name entered in the Network Name (SSID) field and check the Display Password box. Then change the password entered in the Pass Phrase field Copyright © STRONG 2024. All Rights Reserved. 45 / 126...
  • Page 46 4GROUTER300/4GROUTER300V2 - User Guide 46 / 126 Click Apply to save the changes. Copyright © STRONG 2024. All Rights Reserved. 46 / 126...
  • Page 47 4GROUTER300/4GROUTER300V2 - User Guide 47 / 126 Write your new SSID and password on a paper and tape it to the router. Copyright © STRONG 2024. All Rights Reserved. 47 / 126...
  • Page 48: Updating The Device Firmware

    Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Once this is done, click Device Settings and select Advance Settings. In Advanced Settings, click FOTA Upgrade and Check. Copyright © STRONG 2024. All Rights Reserved. 48 / 126...
  • Page 49 You must wait until the update is complete. During the upgrade, the LEDs of the devices turn blue and the blue light goes from left to right from one icon to the other. Once the update is Copyright © STRONG 2024. All Rights Reserved. 49 / 126...
  • Page 50: Customized Settings

    The first section that you can see in the Internet Settings page is called Connected Devices. You can see the number of devices that are connected to the Wi-Fi network or to the router network by using an Ethernet cable Copyright © STRONG 2024. All Rights Reserved. 50 / 126...
  • Page 51: Network Selection

    In the Internet Settings, you can set the network type that you want to use for the Internet connection of your router. To do so, click Device Settings on the top bar, then click Internet Settings. Copyright © STRONG 2024. All Rights Reserved. 51 / 126...
  • Page 52: Data Roaming

    The Data Roaming option is of use if you are travelling in another country. Before enabling the option, make sure that your service provider will not charge extra cost for using its services outside Copyright © STRONG 2024. All Rights Reserved. 52 / 126...
  • Page 53 Connecting to the Wi-Fi and Accessing the Web Click Device Settings on the top bar, then click Internet Settings. Click Data Roaming and then select Disabled. Click Apply. Copyright © STRONG 2024. All Rights Reserved. 53 / 126...
  • Page 54 To reactivate the data roaming, you must be connected to the Web UI, please follow this procedure for the connection: Connecting to the Wi-Fi and Accessing the Web Click Device Settings on the top bar, then click Internet Settings. Copyright © STRONG 2024. All Rights Reserved. 54 / 126...
  • Page 55: Statistics

    This section of the user interface helps you to track the data use and the remaining data of your subscription. To activate the statistics, click Device Settings on the top bar, then click Statistics Settings. Copyright © STRONG 2024. All Rights Reserved. 55 / 126...
  • Page 56 Enter the percentage of used data after which you want to receive a notification (a value between 50 and 75, is advised so that you can control the use for the remaining data). Copyright © STRONG 2024. All Rights Reserved. 56 / 126...
  • Page 57: Voice Settings

    In our router, voice settings refer to the SIP ALG feature that helps apps or VoIP devices to go through the firewall to make VoIP calls. If your apps and devices already work with SIP ALG, you can deactivate the feature in the Web UI. Copyright © STRONG 2024. All Rights Reserved. 57 / 126...
  • Page 58 Connecting to the Wi-Fi and Accessing the Web UI.  Connecting your Device with an Ethernet Cable and Accessing the Web UI Click Device Settings on the top bar, then click Internet Settings. Click Disable and Apply. Copyright © STRONG 2024. All Rights Reserved. 58 / 126...
  • Page 59: Wi-Fi Settings

    4GROUTER300/4GROUTER300V2 - User Guide 59 / 126 1.1.4. Wi-Fi Settings In the Wi-Fi Settings, you can set different parameters such as SSID, additional SSIDs, WPS, Mac Filter and advanced settings. 1.1.4.1. SSID Settings Copyright © STRONG 2024. All Rights Reserved. 59 / 126...
  • Page 60 60 / 126 Main SSID (Wi-Fi Network Name) You can reset your SSID and password, for more information please see: Changing the SSID and password (CASE 2: Using the Device Settings) Copyright © STRONG 2024. All Rights Reserved. 60 / 126...
  • Page 61 SSIDs, make sure that your SIM card has enough available mobile data for each network. To do so, click Device Settings and then Wi-Fi Settings. Then, click SSID and click the SSID 1 tab. Copyright © STRONG 2024. All Rights Reserved. 61 / 126...
  • Page 62 62 / 126 Click Enabled and Apply. Click Yes on the pop-up message. When the SSID is created you will be disconnected from the main Wi-Fi Network and the Web UI. Copyright © STRONG 2024. All Rights Reserved. 62 / 126...
  • Page 63 SSID and by following this procedure Enter the Network Name for SSID1. We strongly recommend putting a name and password that are different from the Wi-Fi name of your router and your internet box. Copyright © STRONG 2024. All Rights Reserved. 63 / 126...
  • Page 64 4GROUTER300/4GROUTER300V2 - User Guide 64 / 126 Click Display Password and then enter a Pass Phrase for SSID1 before clicking Apply. Copyright © STRONG 2024. All Rights Reserved. 64 / 126...
  • Page 65 4GROUTER300/4GROUTER300V2 - User Guide 65 / 126 Select Yes in the pop message that appears on screen. Copyright © STRONG 2024. All Rights Reserved. 65 / 126...
  • Page 66: Wps Settings

    Wi-Fi network of the 4G Router 300V2. Once, you connected your devices by using one of the WPS methods mentioned above, they will automatically connect to the network. Copyright © STRONG 2024. All Rights Reserved. 66 / 126...
  • Page 67 4GROUTER300/4GROUTER300V2 - User Guide 67 / 126 Copyright © STRONG 2024. All Rights Reserved. 67 / 126...
  • Page 68 The following section explains how to deactivate the WPS connection of your router. To deactivate the WPS option, click Device Settings and Wi-Fi Settings. Then, click WPS Settings. Click Disabled next to the WPS Switch option. Copyright © STRONG 2024. All Rights Reserved. 68 / 126...
  • Page 69 4GROUTER300/4GROUTER300V2 - User Guide 69 / 126 Click Disabled next to the Current PIN Switch. Click Apply to save changes. Copyright © STRONG 2024. All Rights Reserved. 69 / 126...
  • Page 70 4GROUTER300/4GROUTER300V2 - User Guide 70 / 126 Copyright © STRONG 2024. All Rights Reserved. 70 / 126...
  • Page 71: Mac Filter

    Write down the MAC addresses before entering them into the Web UI. This way you will be able to use your computer in Wi-Fi or by plugging an ethernet cable. Copyright © STRONG 2024. All Rights Reserved. 71 / 126...
  • Page 72 Connecting to the Wi-Fi and Accessing the Web UI Click Device Settings and Wi-Fi Settings. Click MAC FILTER. Then, select Whitelist and enter the MAC addresses of your devices before clicking Apply. Copyright © STRONG 2024. All Rights Reserved. 72 / 126...
  • Page 73 4GROUTER300/4GROUTER300V2 - User Guide 73 / 126 Copyright © STRONG 2024. All Rights Reserved. 73 / 126...
  • Page 74 Connecting to the Wi-Fi and Accessing the Web UI Click Device Settings and Wi-Fi Settings. Click MAC FILTER. Then, select Blacklist and enter the MAC addresses of your devices before clicking Apply. Copyright © STRONG 2024. All Rights Reserved. 74 / 126...
  • Page 75: Advanced Settings

     Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Then, click Device Settings and Wi-Fi Settings. Copyright © STRONG 2024. All Rights Reserved. 75 / 126...
  • Page 76 Click Advanced Settings, in the Network Mode field, select. 802.11 n only if your devices use the wireless n adapters standard. Otherwise, use the default value: 802.11b/g/n. Click Apply to save the changes Copyright © STRONG 2024. All Rights Reserved. 76 / 126...
  • Page 77 4GROUTER300/4GROUTER300V2 - User Guide 77 / 126 Click Yes in the pop-up that appears. Copyright © STRONG 2024. All Rights Reserved. 77 / 126...
  • Page 78: Channel Bandwidth

     Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Then, click Device Settings and Wi-Fi Settings. Copyright © STRONG 2024. All Rights Reserved. 78 / 126...
  • Page 79 4GROUTER300/4GROUTER300V2 - User Guide 79 / 126 Click Advanced Settings, in the Channel Bandwidth field, select. 20 MHz. Click Apply to save the changes. Copyright © STRONG 2024. All Rights Reserved. 79 / 126...
  • Page 80 4GROUTER300/4GROUTER300V2 - User Guide 80 / 126 Click Yes in the pop up that appears. You must reconnect all your devices after this step. Copyright © STRONG 2024. All Rights Reserved. 80 / 126...
  • Page 81: Frequency (Channel)

    Then click Advanced Settings, select the best available frequency in the Frequency (channel) field. The default value is set on Auto but as many routers use this parameter it is better to change it. Copyright © STRONG 2024. All Rights Reserved. 81 / 126...
  • Page 82 4GROUTER300/4GROUTER300V2 - User Guide 82 / 126 Click Apply to save the changes. Copyright © STRONG 2024. All Rights Reserved. 82 / 126...
  • Page 83 4GROUTER300/4GROUTER300V2 - User Guide 83 / 126 Click Yes in the pop up that appears. Copyright © STRONG 2024. All Rights Reserved. 83 / 126...
  • Page 84: Dcs

    Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Once this is done, click Device Settings and Wi-Fi Settings. Copyright © STRONG 2024. All Rights Reserved. 84 / 126...
  • Page 85 DCS Time Interval in minutes. The duration must be between 3 and 1440 minutes. The frequency channel will automatically change each 720 minutes if you entered this value. Then click Apply. Copyright © STRONG 2024. All Rights Reserved. 85 / 126...
  • Page 86 4GROUTER300/4GROUTER300V2 - User Guide 86 / 126 Click Yes in the pop up that appears. You must reconnect all your devices after this step. Copyright © STRONG 2024. All Rights Reserved. 86 / 126...
  • Page 87: Advance Settings

    DHCP Lease Time: Time for which each device will have this IP Address. The IP Address and DHCP DNS should not be changed as their IP Addresses are used to access the Web UI and subnet mask should also remain as is. Copyright © STRONG 2024. All Rights Reserved. 87 / 126...
  • Page 88: Ussd

    Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Device Settings and Advance Settings. Then, click USSD. Copyright © STRONG 2024. All Rights Reserved. 88 / 126...
  • Page 89 4GROUTER300/4GROUTER300V2 - User Guide 89 / 126 Then, click USSD and enter the USSD code before clicking Send. Copyright © STRONG 2024. All Rights Reserved. 89 / 126...
  • Page 90: Static Ip

    To do so, you must connect to the Web UI by following one of these procedures:  Connecting your Device with an Ethernet Cable and Accessing the Web UI  Changing the administrator password in the Web UI Click Device Settings and Advance Settings. Copyright © STRONG 2024. All Rights Reserved. 90 / 126...
  • Page 91 91 / 126 Then, click Static IP and select Enabled. Enter the MAC Address of your device and the IP Address that you want to assign to it and click Apply. Copyright © STRONG 2024. All Rights Reserved. 91 / 126...
  • Page 92: Static Routing

    Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Device Settings and Advance Settings. Then, click Static Routing and Add Entry. Copyright © STRONG 2024. All Rights Reserved. 92 / 126...
  • Page 93 Enter the following information in the pop-up that appears before clicking Apply: Destination IP Address: Enter the IP Address of the device.   Netmask: Default value is 255.255.255.0.  Gateway: Enter the IP Address of the gateway. Copyright © STRONG 2024. All Rights Reserved. 93 / 126...
  • Page 94: Ddns

    DDNS Provider: Choose your service provider in the list (dydns.org or no-  ip.com)  Account: username of the account.  Password: Password of the registered account.  Domain Name: Enter the name of the domain Copyright © STRONG 2024. All Rights Reserved. 94 / 126...
  • Page 95: Band Locking

    To configure Band Locking, please follow one of the procedures below to access the Web UI:  Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Device Settings and Advance Settings. Copyright © STRONG 2024. All Rights Reserved. 95 / 126...
  • Page 96 Band Locking. Look for the bands used by your service provider online. Then, unselect the bands that are not used by your service provider in the list and click Apply. Copyright © STRONG 2024. All Rights Reserved. 96 / 126...
  • Page 97: Antenna Settings

    Web UI:  Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Device Settings and Advance Settings. Copyright © STRONG 2024. All Rights Reserved. 97 / 126...
  • Page 98 4GROUTER300/4GROUTER300V2 - User Guide 98 / 126 Then, click Antenna select external in the list and click Apply. Copyright © STRONG 2024. All Rights Reserved. 98 / 126...
  • Page 99: Firewall Settings

    Your WAN IP Address if you want to filter the packets from your router to a specific destination. In the Home page of the Web UI, locate the following information: Copyright © STRONG 2024. All Rights Reserved. 99 / 126...
  • Page 100 To block a specific website, look for its IP address in your browser and write it down. Examples of websites IP addresses IPV4: Google: 8.8.8.8 or 8.8.4.4. Facebook: 157.240.201.35 Bing: 204.79.197.200 or 13.107.21.200 Click Firewall and then Port Filtering. Copyright © STRONG 2024. All Rights Reserved. 100 / 126...
  • Page 101 4GROUTER300/4GROUTER300V2 - User Guide 101 / 126 Check the Enabled option and then Dropped option. Then, click Apply to save the changes Click Yes in the pop-up window that appears. Copyright © STRONG 2024. All Rights Reserved. 101 / 126...
  • Page 102 Action: Choose between accept (enables the access to the destination) and drop (blocks the access to the destination).  Comment: Enter a description for the rule you created. This field does not accept spaces. Copyright © STRONG 2024. All Rights Reserved. 102 / 126...
  • Page 103: Port Mapping

    If you want to forward the queries to your device, you need to locate IP addresses of the device. To do so, click Device Settings and Connected Devices. Then write down the IP address of your device. Copyright © STRONG 2024. All Rights Reserved. 103 / 126...
  • Page 104 Port Range: For a HTTP service enter 80-80. For more information about the different port services, see. Protocol: Choose the type of protocol in the dropdown list (TCP+UDP, TCP or UDP) Copyright © STRONG 2024. All Rights Reserved. 104 / 126...
  • Page 105: Port Forwarding

    Connecting your Device with an Ethernet Cable and Accessing the Web UI  Then, write down the WAN IP Address of your router that appears in the Internet section of the home page in the Web UI Copyright © STRONG 2024. All Rights Reserved. 105 / 126...
  • Page 106 Destination Port: The current port number used to provide services to your device.  Protocol: the type of protocol supported to forward queries.  Comment: Name for the forwarding rule you have just created. Copyright © STRONG 2024. All Rights Reserved. 106 / 126...
  • Page 107: Url Filtering

     TIPS: If you previously accessed one of the websites that you added to URL filtering, please close and reopen your browser for the change to be taken into account To set up this parameter, click Firewall and then select URL Filtering Copyright © STRONG 2024. All Rights Reserved. 107 / 126...
  • Page 108 4GROUTER300/4GROUTER300V2 - User Guide 108 / 126 Click Enabled and Apply. Copyright © STRONG 2024. All Rights Reserved. 108 / 126...
  • Page 109 4GROUTER300/4GROUTER300V2 - User Guide 109 / 126 Enter the URL of the website that you want to block and click Apply. Copyright © STRONG 2024. All Rights Reserved. 109 / 126...
  • Page 110: Upnp

    Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI  Click Firewall and UPnP. Then, click Enabled and Apply. Copyright © STRONG 2024. All Rights Reserved. 110 / 126...
  • Page 111: Dmz

    Web UI. Please refer to the following procedures to connect to Web UI:  Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Firewall and DMZ. Copyright © STRONG 2024. All Rights Reserved. 111 / 126...
  • Page 112 Click the Enabled option next to the DMZ Settings. To add your game console or any other device to the DMZ. (You can find the IP address in the settings of the device). Write down the IP Address. Copyright © STRONG 2024. All Rights Reserved. 112 / 126...
  • Page 113: Rate Limiting

    Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click Firewall and Rate Limiting. Then, select Enabled and click Apply. Copyright © STRONG 2024. All Rights Reserved. 113 / 126...
  • Page 114  IP Address: Enter the IP Address of your device.  Download Speed: Enter the maximum download speed in KB.  Upload Speed: Enter the maximum upload speed in KB. Copyright © STRONG 2024. All Rights Reserved. 114 / 126...
  • Page 115: System Settings

    Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Then, click System Settings and select Sytem Setting and Time Setting. Copyright © STRONG 2024. All Rights Reserved. 115 / 126...
  • Page 116 SNTP Server 1/2/3: Choose the server between the values (time-nw.nist.gov, pool.ntp.org, Europe.pool.ntp.org, Other, NONE.)  Time zone: Select your time zone in the list.  Daylight Saving Time: Enable this parameter if your time zone has summertime. Copyright © STRONG 2024. All Rights Reserved. 116 / 126...
  • Page 117 4GROUTER300/4GROUTER300V2 - User Guide 117 / 126 Copyright © STRONG 2024. All Rights Reserved. 117 / 126...
  • Page 118: Network Tools

     Connecting to the Wi-Fi and Accessing the Web UI Then, click System Settings and select Network Tools. Click Trace and enter the URL or IP Address before clicking start. Copyright © STRONG 2024. All Rights Reserved. 118 / 126...
  • Page 119: Ping

    Connecting your Device with an Ethernet Cable and Accessing the Web UI Connecting to the Wi-Fi and Accessing the Web UI  Then, click System Settings and select Network Tools. Copyright © STRONG 2024. All Rights Reserved. 119 / 126...
  • Page 120 4GROUTER300/4GROUTER300V2 - User Guide 120 / 126 Click Ping and enter the URL or IP Address before clicking start. Copyright © STRONG 2024. All Rights Reserved. 120 / 126...
  • Page 121 4GROUTER300/4GROUTER300V2 - User Guide 121 / 126 Copyright © STRONG 2024. All Rights Reserved. 121 / 126...
  • Page 122: System Upgrade

    Then, check the Download section of the page, if there is no file available, please follow this procedure to update your router: Updating the device Firmware. Connect to the Web UI by following one of these procedures: Copyright © STRONG 2024. All Rights Reserved. 122 / 126...
  • Page 123 Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click System Settings and System Upgrade. Click Browse to select the file and click Upload. Copyright © STRONG 2024. All Rights Reserved. 123 / 126...
  • Page 124: Reboot

    Connecting your Device with an Ethernet Cable and Accessing the Web UI  Connecting to the Wi-Fi and Accessing the Web UI Click System Settings and Reboot. Then, click Restart device. Copyright © STRONG 2024. All Rights Reserved. 124 / 126...
  • Page 125: Accessing The Faqs

    Click Yes in the pop-up message that appears. The router will restart automatically. VII. Accessing the FAQs You can access the product FAQs by clicking the link in blue or by scanning the QR code below: Copyright © STRONG 2024. All Rights Reserved. 125 / 126...
  • Page 126 4GROUTER300/4GROUTER300V2 - User Guide 126 / 126 4G LTE Router 300 V2 4G LTE Router 300 4G LTE Router 300 UK Copyright © STRONG 2024. All Rights Reserved. 126 / 126...

This manual is also suitable for:

4g lte router 3004grouter300v24grouter300

Table of Contents