E-peas AEM30300 User Manual

Description
The AEM30300 evaluation board is a printed circuit board
(PCB) featuring all the needed components to operate the
AEM30300 integrated circuit (IC).
The AEM30300 evaluation board allows users to test the
e-peas IC and analyze its performances in a laboratory-like
setting.
It allows easy connections to the energy harvester and the
storage element. It also provides all the configuration access
to set the device in any one of the modes described in the
datasheet. The control and status signals are available on
standard pin headers, allowing users to wire for any usage
scenario and evaluate the relevant performances.
The AEM30300 evaluation board is a plug and play, intuitive
and efficient tool for making the appropriate decisions
(component selection, operating modes, etc.) for the design
of a highly efficient subsystem in your target application.
More detailed information about AEM30300 features can be
found in the datasheet.
Appearance
UG-AEM30300_EVK1.3-v1.1
USER GUIDE
AEM30300 Evaluation Board User Guide
Copyright © 2024 e-peas SA
Features
Five two-way screw terminals
- Source of energy (DC).
- Source of energy (AC low frequency).
- Source of energy (AC medium frequency).
- ZMPP configuration.
- External output supply.
One three-way screw terminal
- Energy storage element (battery or (super)capacitor).
One 2-pin "Shrouded Header"
- Alternative connector for the storage element.
3-pin headers
- Maximum power point ratio (R_MPP) configuration.
- Maximum power point timing (T_MPP) configuration.
- Storage element voltage configuration.
- Dual-cell supercapacitor configuration.
- Modes configuration.
Provision for five resistors
- Custom mode configuration.
- ZMPP configuration.
Configuration by 0 Ω resistors
- Cold start input configuration.
One 1-pin header
- Access to status pin.
Device Information
Part Number
2AAEM30300C001
AEM30300
Dimensions
76 mm x 50 mm
1