Advertisement
Quick Links
Operating instructions for
The DC8811 Wind, Light & Rain Sensor is a solar-powered accessory that extends the functionality of drives of window coverings such as screens,
blinds and shutters. It can initiate the rolling up and unrolling of coverings depending on the prevailing weather conditions.
The sensor can work with the following drives:
- N-10RE, N-13RE, N-20RE,
- N-6RES, N-10RES, N-15RES, N-20RES, N-40RES.
1 Sensor assembly and installation
Mount the sensor in a convenient location as shown in the figure below. Use two self-drilling screws suitable for the substrate.
2 Sensor mode setting
Press
for 1s
Current operating mode
is displayed
Press
for 3s
Note:
For the sensor to work properly, one of two modes must be selected: A00, A01.
Original instructions PL
Function
selection
Up
flashes
quickly
Press
for 3s
New operating mode has been set
does not
flash
Wind, Light & Rain Sensor
DC8811
Model:
DC8811
LCD
Mode
Function
button
Confirm
or
Press UP or P2 to set the
desired operating mode
Rain
Light
Wind
Advertisement
Summary of Contents for Inel DC8811
- Page 1 Wind The DC8811 Wind, Light & Rain Sensor is a solar-powered accessory that extends the functionality of drives of window coverings such as screens, blinds and shutters. It can initiate the rolling up and unrolling of coverings depending on the prevailing weather conditions.
- Page 2 Mode A00 is for shades, mode A01 is for shutters. 3 Registering a sensor for the drive To register a sensor for the drive: • on the registered remote control, press the buttons simultaneously, • press the UP button on the sensor. The sensor has been registered 4 Sensor operation...
- Page 3 flashes quickly Press Press and Set the desired light for 3s select sun intensity mode does flash The new threshold value of light intensity has been set Press for 3s Note: When the threshold value is set to 0, the light intensity function is disabled. 7 Rain sensor configuration The current status of the rain function...
- Page 4 Przedsiębiorstwo Informatyczno-Elektroniczne INEL Sp. z o.o., ul. Mostowa 1, 80-778 Gdańsk, hereby declares that the sensor described in these instructions is in conformity with Directive 2014/53/EU.
Need help?
Do you have a question about the DC8811 and is the answer not in the manual?
Questions and answers