Tips This product is designed for professional use only. This machine is not designed to be used on synthetic hair or for any other purpose other than cutting 100% human hair. The company will not take responsibility for malfunctions or damages caused by misuse.
How to charge your trimmer Important: Use only original power cord to charge. You can charge your unit on the portable charging base, or charge the trimmer directly by plugging the power cord to the trimmer itself. Note: When the trimmer is low on charge, the adapter can be plugged onto the trimmer directly.
Blade maintenance Note: Please read the blade maintenance instructions carefully before operating. Follow the instructions when removing and installing the blade to avoid improper assembly. After the blade is installed, be sure to carefully check whether the corresponding parts have been firmly attached. Before operating, please unplug the power adapter and turn o the trimmer.
Page 6
Trimmer blade adjustment instructions (altering blade for closer cut) Loosen the screws 180 degrees Install blade adjustment tool (protector) Tighten the screws Ensure blades are properly aligned How to install and replace guards Trimmer comes with 5 guards. Sizes are: 1/2# (1.5 mm), 1# (3 mm), 2# (6 mm), 2-1/2# (8 mm), 3#(10 mm) Installing your guard: As shown in the figure below, align the card slot corresponding to the guard with the main unit of the trimmer, and then lift the main unit gently until you hear a ‘click’, which...
Warranty Under normal conditions of proper use and maintenance of the product, the warranty period of the product is 1 year. Expendable parts, such as blades, guards, lubricants, cleaning brushes, etc., are not under the terms of the warranty. The following conditions are not covered by the warranty service: Failure to show a valid warranty card, or the information on the warranty card is inconsistent with the actual product.
Need help?
Do you have a question about the FF 2020T-B and is the answer not in the manual?
Questions and answers