Subscribe to Our Youtube Channel
Related Manuals for ADX ADSGAMDK25
Summary of Contents for ADX ADSGAMDK25
- Page 1 ADX Gaming Desk INSTRUCTION MANUAL ADSGAMDK25 Before using this appliance, read all safety instructions carefully first in the Safety Warnings booklet and keep them for future reference.
-
Page 2: Safety Warnings
Safety Warnings Height Adjustable Desk Read all the instructions carefully before using the unit and keep them for future reference. Retain the manual. If you pass the unit onto a third party, make sure to include this safety and the instructions manual. For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. - Page 3 • Slight noise caused by the V-ribbed belt or brake system due to structure will not have any effect on the use of the equipment. • Please make sure there is no hazard sources in your operating environment. e.g., do not litter the tools around.
- Page 4 Safety Warnings - Coin, Lithium Coin Cell Battery • BATTERY WARNING: KEEP OUT OF REACH cause overheating, leakage, venting, rupture, OF CHILDREN explosion, fire and personal injury. • If the battery compartment (if applicable) When the positive (+) and negative (–) does not close securely, stop using the terminals of a battery are in electrical contact product and keep it away from children.
- Page 5 k) Do not deform batteries associated with this. The child might: Batteries should not be crushed, punctured, • cough, gag or drool a lot; or otherwise mutilated. Such abuse can cause • appear to have a stomach upset or a virus; leakage, venting, explosion or fire, and can •...
- Page 6 d) Store collected batteries in a well-ventilated area Used batteries might contain a residual charge. If they are short-circuited, abnormally charged or force discharged, leakage of flammable gas might be caused. This can result in fire, rupture or explosion. e) Do not mix collected batteries with other materials Used batteries might contain residual charge.
- Page 7 It is hazardous for anyone other than authorised service personnel to carry out servicing of repairs which involve the removal of covers. To avoid the risk of an electrical shock do not attempt repairs yourself. Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day.
-
Page 8: Table Of Contents
Contents Safety Warnings ................Safety Warnings booklet Unpacking ..........................4 Assembly Warnings ........................7 Installation ..........................8 Control Panel ........................17 Remote Control ........................18 Remove the Plastic Strip from the Remote Control ............19 Battery Replacement for the Remote Control ..............19 Operation ..........................21 Height Adjustment ............................21 Save Height Position ........................... - Page 9 CUSTOMER HELPLINE (UK Customers Only) 0344 561 1234 700 (L) × 1400 (W) × 735/1180 (H) mm 60 kg Stand dimensions Max loading capacity Screw holes on the tabletop’s bottom for installation Screw holes for installing brackets (step 6) Screw holes for installing control panel (step 8)
-
Page 10: Unpacking
Thank you Thank you for purchasing your new product. for purchasing your new product. We recommend that you spend some time reading this instruction manual in We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will order that you fully understand all the operational features it offers. - Page 11 × 1 × 2 × 1 Crossbeam Bracket Tabletop × 1 × 1 × 1 × 2 Transmission Rod Baffle Left Column Right Column × 1 × 1 × 1 × 2 Control Panel Adapter Adapter Bracket Feet (with 2 screws) ×...
- Page 12 × 1 × 1 × 1 Cable Tray RGB LED Control Box Mousepad × 1 MODE S a fe ty SPEED DEMO In st ru c ti o n SPEED W a rn in g s M a n u a l COLOR MODE BRIGHT...
-
Page 13: Assembly Warnings
Assembly Warnings ATTENTION – Please note before assembling your product. • Read all the instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party, make sure to include this manual. -
Page 14: Installation
Installation Install the Beam Make sure that the three protruding points on the × 4 table’s legs align with the holes in the beam. 4 × 4 Install the Bracket × 4 4 × 4... - Page 15 Install the Table’s Legs × 8 4 × 4 Install the Transmission Rod...
- Page 16 Install the Transmission Rod (detail) 2.5 × 2.5 4 × 4 Loosen 4 × 4 Loosen 2.5 × 2.5 Tighten...
- Page 17 Install the Adapter Bracket and Adjust the Beam 扣在 可根据 使用的情况， 支撑横梁伸 距离 Attach the narrow edge of the adapter bracket to the beam near the motor end. Install the Tabletop × 10 • Secure the brackets before the beam with the screws. •...
-
Page 18: Install The Control Panel
Secure the Transmission Rod and Beam Tighten 4 x 4 Tighten Install the Control Panel... -
Page 19: Install The Adapter
Install the Baffle × 4 2.5 × 2.5. While installing the baffle, leave a gap between it and the motor. Install the Adapter... - Page 20 Connect all Cables Connect to a power source with USB Type-C socket Connect the RGB Connect the RGB LED light cable LED light cable Connect to mains socket Remove the liner from Desk Surface the clip, and then place the clip on the desk surface for securing the connecting cable.
- Page 21 Install the Cable Tray Bracket Stand up the Unit...
- Page 22 Install the Cable Tray Place the mousepad upon the desktop...
-
Page 23: Control Panel
Control Panel 1. Display 2. / / 3 / 4 Button • Press and hold / / 3 / 4 button for about 3 seconds to save the current position. The display will show “S-1“ / “S-2“ / “S-3“ / “S-4“ respectively. •... -
Page 24: Remote Control
Remote Control MODE SPEED DEMO SPEED COLOR MODE BRIGHT COLOR BRIGHT ON/OFF Button 2. SPEED+/SPEED– Button Press SPEED+/SPEED– button to increase/decrease flashing speed. 3. DEMO Button Press to switch to Red/Green/Blue light mode. 4. COLOR+/COLOR– Button Press COLOR+/COLOR– button to switch between different light colour modes. -
Page 25: Remove The Plastic Strip From The Remote Control
Remove the Plastic Strip from the Remote Control Remove the plastic strip from the battery if the battery is being used for the first time. It is located at the bottom rear of the remote control. Battery Replacement for the Remote Control The remote control requires a CR2025, 3V Lithium battery. - Page 26 Handling the Battery • Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property. • Install the battery correctly in the battery compartment. • When the battery is exhausted, the remote control will not function.
-
Page 27: Operation
Operation Height Adjustment Press button to raise/lower the height of the desk. Save Height Position Press and hold / / 3 / 4 button for about 3 seconds to save the current desk height position. The display will show “S-1“ / “S-2” / “S-3” / “S-4” respectively. After saving, press / / 3 / 4 button to resume the saved position. -
Page 28: Troubleshooting
Troubleshooting 1. If there is no response to button after a period of continuous work, please rest for more than 18 minutes before resuming work. 2. During the lifting process, if there is downward sliding, please check whether the desk load is too heavy or the desk shakes greatly. Error Code Code Problem... - Page 29 The motor does not move as • Re-position the desk. instructed • Check and remove any objects above or below the desk that could obstruct movement. Rising in a low speed • Check that the desk does not exceed its lifting capacity. Maximum load is 60 Equipment decline •...
-
Page 30: Main Materials
The bottom cannot rise • Perform a reset operation. Remote control unable to • Replace the remote control battery. control light strip The light strip does not light • Output cable of RGB LED control box is properly connected to the socket of light strip on both side. -
Page 31: Specifications
Specifications Desk Model ADSGAMDK25 Column Number Maximum Load 60 kg Input Voltage 220-240 V Maximum Speed 20 mm/s Lowest Position 735 mm Highest Position 1180 mm Desktop Dimension (L × W) 1400 × 700 mm Duty Cycle (Using Frequency) Use 2 minutes, rest 18 minutes. - Page 32 1 minute Declaration of Conformity (RER) Hereby, Currys Group Limited declares that the radio equipment type [ADSGAMDK25] is in compliance with Radio Equipment Regulations 2017(S.I. 2017/1206). The full text of the UK declaration of conformity is available at the following internet address:...
- Page 33 3rd Floor Office Suite, Omni Park SC, Santry, Dublin 9, Republic of Ireland Declare that the Product ADSGAMDK25 Height Adjustable RGB Gaming Desk with Electronic Control The object of the declaration is in conformity with the relevant Union harmonisation legislation...
- Page 34 UK Representative: Currys Group Limited (Registered in England No. 504877) 1 Portal Way, London, W3 6RS, UK Declare that the Product ADSGAMDK25 Height Adjustable RGB Gaming Desk with Electronic Control The object of the declaration is in conformity with the relevant United Kingdom legislation Radio Equipment Regulations 2017 (S.I.
- Page 35 Currys Limited (co. no. 504877) 1 Portal Way, London, W3 6RS, UK EU Representative Currys Ireland Limited (259460) 3rd Floor Office Suite Omni Park SC, Santry, Dublin 9, Republic of Ireland IB-ADSGAMDK25-240902V2...
Need help?
Do you have a question about the ADSGAMDK25 and is the answer not in the manual?
Questions and answers