NightSearcher NEXSUN-2500 User Manual

Function of 2.4G remote control
Insert 2 x AAA batteries (Not supplied ).
Turn ON/OFF manually, functional b th for day and night.
Set to turn ON at dusk , Turn off at dawn automaticall .
Set 4 different levels of brightness
Test mode. Light will turn ON and operate for 1min and turn OFF
Set light to operate at 100% power when microwave sensor is triggered.
Set light to operate at 100% from 30% output when microwave sensor is triggered. Set light to operate at 100% from 30% output when microwave sensor is triggered.
Set the light to operate at 100% output for different time period
Wiring Connection Diagram
4.5m adapter cable
You can use it for
Remark
1. Brightness level of the flood light must be set before before choosing operational
2. Motion senso option is un vailable when setting a specific li ting output (25%, 50%, 75% o 100%)
3. The two motion senso modes are factory set and cannot be changed. Light will only turn on with 100% output or change from
30% to 100% output when movement is detected by microwave sensor. Only the working time can be adjusted
4. The light will blink twice when it receives the signal successfully from the remote.
5. Light can turn on with ON/OFF button b th at daytime and nig ttime y manual operation
Batter Capacity Indicator
Batter Power
0% ~ 30%
31% ~ 70%
71% ~ 100%
• Construction Sites
• Car Parks
• Farm Buildings
• Forecourts
es (4h, 6h or 12 hours)
User Manual
Solar Powered Solar LED Flood Light
******The led light source is non-user replaceable******
Environmental Remote 2000 Cycles 3 Days Electricity
Protectio Se ng LifePO4 Batter Autonomy Bills free
High luminous 100% Green Maintenance Motion ensor Dusk to Dawn
efficiency Energy Free Detectio Auto ON/OFF