Victor 2015H User Manual

User's Manual
1. Instrument introduction
These series two-channel function/arbitrary waveform generator is equipped
with direct digital synthesis (DDS) technology which enables output signal to
be stable, accurate and low distortion.
This series of instruments are divided into three models, the main difference is
the maximum frequency of sine wave output,they are 20MHz、40MHz and 60
MHz.
1.1. Key Features
1.1.1. 2.4-inch 320x240 TFT LCD with clear graphic interface
1.1.2. Chinese / English menu available
1.1.3. The two channels are independent of each other, with phase synchronization fun
ction
1.1.4. Sampling rate: 200MSa/S, vertical resolution: 13 bit and storage depth: 8k
1.1.5. 5 basic waveform and 32 arbitrary waveform in-built
1.1.6. Waveform storage; Supports internal storage of 50 groups of user-defined edited
waveform
1.1.7. Pulse wave output set in edge time
1.1.8. Internal AM, FM, PM modulation function (External AM, FM, PM modulation matc
hing)
1.1.9. Internal/external ASK, FSK and PSK modulation function
1.1.10. Two-channel output, the highest output frequency is 60M
1.1.11. Output of linear/logarithmic frequency sweep and burst waveform
1.1.12. Frequency meter of high precision of 100MHz and 32-bit counter
1.1.13. With USB Device,external analog modulation interface
1.1.14. Multi-functional arbitrary waveform editing software equipped
1.2. Cautions
1.2.1. Ensure that the port voltage is within the rated range before accessing the signal
1.2.2. Do not operate the instrument in a humid environment
1.2.3. Ensure that the instrument is reliably grounded
1.2.4. To ensure high accuracy, preheat for 30 minutes in the temperature range of 18 °
C to 28 ° C before using
2. Panel introduction
This section describes front and rear panels of this instrument for your quick
understanding of function and usage.
2.1. Front panel
Front panel includes liquid crystal, keys,CH1 output of channel 1,CH2 output of channel
2, and the external input terminal Ext.IN.