Subscribe to Our Youtube Channel
Related Manuals for LANSEN LAN-WMBUS-Q-RC
Summary of Contents for LANSEN LAN-WMBUS-Q-RC
- Page 1 QUICK INSTALLATION GUIDE RADON/CO2/TEMPERATURE/HUMIDITY/PRESSURE (LAN-WMBUS-Q-RC) RADON /TEMPERATURE/HUMIDITY/PRESSURE (LAN-WMBUS-Q-R) CO2/TEMPERATURE/HUMIDITY/PRESSURE (LAN-WMBUS-Q-C) Version: 1.1...
- Page 2 Recommended mounting instructions: Step 3: • Thread the power cable through the marked Mount on a solid wall hole on the back (black) plastic piece. • Place the sensor 160-180cm above floor Step 1a: Unscrew and remove the screw at the bottom of the device.
- Page 3 For device LAN-WMBUS-Q-R and LAN-WMBUS-Q-RC, the indications are based on the radon level while LAN-WMBUS-Q-C is based on the CO2 level. CO2 level for ok: 0-999 ppm...
Need help?
Do you have a question about the LAN-WMBUS-Q-RC and is the answer not in the manual?
Questions and answers