Download Print this page

Quasar QMK8163 Instruction Manual

3d flashing rainbow christmas tree

Advertisement

Quick Links

QMK8163 - 3D Flashing Rainbow Christmas Tree Instruc on Manual
General Guidelines for Electronic Kits and Assembled Modules
Thank you for choosing one of our products. Please take some me to carefully read the important informa on
below concerning use of this product. The assembly and opera ng instruc ons are on the following pages.
WEEE Direc ve (Waste Electrical and Electronic Equipment)
Safety: General rules concerning safe use of our Kits or Modules
To ensure your safety, please observe these safety measures. In no way are these complete. As safety
requirements vary, please check with your local authori es, in order to comply with local requirements. If in
doubt, seek the help of a qualified person.
Ba7ery or wall-adaptor operated devices are safe devices. They do not require special a7en on unless mains
voltage is connected to an output e.g. a relay.
To ensure electrical safety, and also protec on from fire or personal injury, make sure your mains operated
equipment complies with these safety hints:
Use a suitable plas c enclosure. If a metal enclosure is used, make sure it is properly earthed.
Use a power switch if the device consumes more than 10W. Use a double pole switch for mains
operated, transformer-less kits.
Mount a fuse in series with the mains switch. Use a slow blow (T) 50mA fuse for transformers up to
10W and a 100mA fuse for transformers up to 20W.
Use a mains input connector, or a robust power cord with a clamp.
Internal wiring carrying mains voltages must have a minimum cross-sec onal area of 0.5mm
If supplied, a ach the power ra ng label near the power cord of the device and fill-out the mains voltage, frequency,
power consump on and fuse values.
Troubleshoo ng and Support
Please contact us if you require help with this product.
Disclaimer
Quasar Electronics reserves the right to change product specifica ons or to discon nue products without no ce. Quasar Electronics cannot be
held responsible for any loss or damage, direct or indirect, which might occur from the use of a product. Quasar Electronics Kits or Modules are
intended for educa onal and demonstra on purposes only. They are not intended for use in commercial applica ons. If they are used in such
applica ons the purchaser assumes all responsibility for ensuring compliance with all local laws. In addi on, they are not suitable for use as or
as a part of life support systems, or systems that might create a hazardous situa on of any kind.
No ce To All UK and EU Ci zens. Important environmental informa on about this product.
The crossed out wheeled bin symbol on this product, package or documenta on indicates that
disposal of this product a er its lifecycle could harm the environment. Do not dispose of this
product (or ba eries if used) as unsorted municipal waste. It should be disposed by a
specialized company for recycling.
The unit should be returned to your distributor or to a local recycling service. Please respect
the local environmental rules. If in doubt contact your local authori es about waste disposal
rules.
2
.

Advertisement

loading
Need help?

Need help?

Do you have a question about the QMK8163 and is the answer not in the manual?

Questions and answers

Summary of Contents for Quasar QMK8163

  • Page 1 Quasar Electronics reserves the right to change product specifica ons or to discon nue products without no ce. Quasar Electronics cannot be held responsible for any loss or damage, direct or indirect, which might occur from the use of a product. Quasar Electronics Kits or Modules are intended for educa onal and demonstra on purposes only.
  • Page 2 QMK8163 - 3D Flashing Rainbow Christmas Tree Instruc on Manual Introduc on This mul -colour rainbow Christmas tree kit consists of two LED tree boards and a base board that form a tree-like shape. The colourful LEDs are mounted on the edges of the two LED tree boards. The LEDs flash alternately like flowing water, automa cally changing between seven colours.
  • Page 3 QMK8163 - 3D Flashing Rainbow Christmas Tree Instruc on Manual Assembly 1. First, solder the components to the C base board. 2. Insert switch S1 with correct orienta on as shown opposite. 3. Add the resistors to boards A & B, followed by the LEDs, electroly c capacitors (laid flat and remembering to observe correct polarity) &...
  • Page 4 QMK8163 - 3D Flashing Rainbow Christmas Tree Instruc on Manual Schema c Diagram Support For Technical Support on this kit please email: support@quasarelectronics.co.uk For our full range of kits please see our website: quasarelectronics.co.uk...