Advertisement
Quick Links
USE AND MAINTENANCE MANUAL
REV0 30/7/2023
PBCA0095GB
THERMAX
INSULATED CONTAINERS
INDEX
1. INTRODUCTION
1.1 Field of application
1.2 Consulting the manual
1.3 Warranty
2. CAUTION
2.1 General recommendations
3. USE OF THE PRODUCT
3.1 First Use
3.2 Container Preparation Instructions
3.3 Loading Instructions
3.4 Transportation Instructions
3.5 Instructions for Proper Use at Destination
3.6 Maxidolly Trolley Assembly Instructions
4. MAINTENANCE
4.1 Washing Instructions
4.2 Maintenance Instructions
4.3 Faucet Replacement Instructions on QC5/10/20/QXtra
4.4 Faucet Replacement Instructions on QC25
4.5 AF12/AF150 Modular System Locking Kit Operating Instructions
5. DISPOSAL
5.1 Packaging
5.2 Manufacturing materials
6. CERTIFICATIONS
1
Advertisement
Summary of Contents for MELFORM THERMAX
- Page 1 USE AND MAINTENANCE MANUAL REV0 30/7/2023 PBCA0095GB THERMAX INSULATED CONTAINERS INDEX 1. INTRODUCTION 1.1 Field of application 1.2 Consulting the manual 1.3 Warranty 2. CAUTION 2.1 General recommendations 3. USE OF THE PRODUCT 3.1 First Use 3.2 Container Preparation Instructions 3.3 Loading Instructions...
- Page 2 2. CAUTION THERMAX is an exclusive MELFORM product. The manufacturer reserves the right to make changes to the characteristics of the models at any time, without prior notice. There may be variations in color tones. The product has been developed in accordance with current technological standards. All the necessary requirements have been met to ensure safe and proper operation of the appliance.
-
Page 3: Use Of The Product
The high temperature may deform its walls and guides. The function of the THERMAX container is not to heat or cool food, but to ensure that it is kept at temperature; Different modes of use are therefore contraindicated. Excessive exposure to atmospheric agents (sun, bad weather) could irreparably alter the coloration and cause permanent deformation of the exposed parts. - Page 4 For NF-certified containers, the recommended loading temperatures to ensure a three-hour transport time are specified for each temperature class of the container, which is indicated on the product next to the MELFORM mark and other characteristic data. 3.4 Transportation Instructions To carry out the transport safely, we recommend that you follow these instructions: •...
- Page 5 • To avoid overflowing of the contents, do not tilt the container during transport and place it • permanently on the vehicle used for deliveries. • Lift or carry the container by the handles only, avoiding doing so by the locking levers to prevent accidental opening.
-
Page 6: Maintenance
4.MAINTENANCE 4.1 Washing Instructions Regular maintenance of the container is crucial to ensure its durability and proper functioning. Carefully follow the following washing instructions: • Make sure that the temperature of the water used for washing never exceeds +100°C (+85°C for containers for transporting liquids, model QC). - Page 7 4.2 Maintenance Instructions To preserve the integrity and proper functioning of the container, MELFORM recommends regular maintenance and the adoption of the following measures: • Check the state of conservation of the gasket (if any) every six months and replace it if it is broken or deteriorated.
- Page 8 4.4 Faucet Replacement Instructions on QC25 4.5 AF12/AF150 Modular System Locking Kit Operating Instructions Closed/Locked/Stoppe Open/Open/Ouverte Tighten until properly locked/ Fit into the temples in the open position/ Screw tight to correct locking/ Put on rods in the open position/ Vis serrée jusqu'à...
- Page 9 1. HACCP certification: THERMAX containers are suitable for use in HACCP environments, ensuring food risk control and maximum hygiene safety. 2. ATP certification: For some models of the THERMAX line it is possible to apply for ATP certification. 3. NF Hygiène Alimentaire certification: Some models in the THERMAX line are NF Hygiène Alimentaire certified.
Need help?
Do you have a question about the THERMAX and is the answer not in the manual?
Questions and answers