1. Manuals
  2. Brands
  3. MELFORM Manuals
  4. Heating System
  5. ACTIVE DOOR K07C230I
  6. Use and maintenance manual

MELFORM ACTIVE DOOR K07C230I Use And Maintenance Manual

Heating doors
Hide thumbs

Advertisement

Table of Contents

USE AND MAINTENANCE MANUAL
PBCA0115GB
REV0 30/7/2023
Active door
heating doors
INDEX
1. INTRODUCTION
1.1 Field of application
1.2 Consulting the manual
1.3 Warranty
2. CAUTION
2.1 General Safety Rules
3. USE OF THE PRODUCT
3.1 First Use
3.2 Installation
3.3 Commissioning
3.4 Digital Thermostat Operation
3.5 Loading Instructions
3.6 Transportation Instructions
3.7 Instructions for prolonged non-use
4. MAINTENANCE
4.1 Heating Assembly Cleaning Instructions
4.2 Active Port Body Cleaning Instructions
4.3 Maintenance Instructions
4.4 Troubleshooting
4.5 Replacing the Protective Fuse
5. DISPOSAL
5.1 Packaging
5.2 Disposal of the product in the territory of the European Union
6. TECHNICAL DATA
7. CERTIFICATIONS
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ACTIVE DOOR K07C230I and is the answer not in the manual?

Questions and answers

Summary of Contents for MELFORM ACTIVE DOOR K07C230I

  • Page 1 USE AND MAINTENANCE MANUAL PBCA0115GB REV0 30/7/2023 Active door heating doors INDEX 1. INTRODUCTION 1.1 Field of application 1.2 Consulting the manual 1.3 Warranty 2. CAUTION 2.1 General Safety Rules 3. USE OF THE PRODUCT 3.1 First Use 3.2 Installation 3.3 Commissioning 3.4 Digital Thermostat Operation 3.5 Loading Instructions...
  • Page 2 It should be noted that ACTIVE DOOR is an exclusive product of MELFORM. The manufacturer reserves the right to make changes to the characteristics of the models at any time without prior notice. In addition, it is possible that there may be variations in the color shades of the product.
  • Page 3 THE APPLIANCE RUNS ON ELECTRICITY. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN INJURY FROM AN ELECTRIC SHOCK AND MAY BE LIFE-THREATENING. The use of the product is reserved for persons who have been trained and informed of the risks associated with the appliance.

  • Page 4: Use Of The Product

    The Active Port assembly must be powered with a mains power of 230VAC 50Hz.
  • Page 5 3.3 Commissioning The appliance does not have a main On/Off switch, and is switched on by connecting it directly to the power supply, as follows: remove the plug cover from the panel (Drawing 2, A) by pulling the appropriate tab; insert the power cord socket into the panel plug of the appliance;...
  • Page 6 3.5 Loading Instructions In order to make the most of the thermal performance of the Active Door assembly, it is recommended to operate as follows: wear protective thermic gloves to avoid the danger of burns; open the container door by using the appropriate closing levers; place the food at a temperature of not less than 75°C;...

  • Page 7: Maintenance

    Store the power cord in a safe place and protect it from moisture. It is recommended to always use original spare parts. Contact your local distributor or MELFORM Sales Service for any assistance and for the supply of original spare parts.

  • Page 8: Control Type

    It is recommended to contact qualified technicians to restore the functionality of the heating unit and to contact your local distributor or Melform Sales Service for any assistance and for the possible supply of original spare parts.
  • Page 9 ANOMALY POSSIBLE CAUSES TYPE OF INTERVENTION a) The Active door assembly is a) Connect the Active door assembly to the 230VAC power not connected to the 230VAC supply. power supply. The Active door b) The fuse of the 230VAC line is b) Fit a new fuse on the 230VAC line (see section 4.5 faulty "Replacing the protective fuse")
  • Page 10 (if faulty department for replacement if necessary fitted in your version) displays b) The connection of the probe b) Contact MELFORM Service for probe reset, if necessary numbers with the digital thermostat is outside of the not compliant standard numbering...
  • Page 11 4.5 Replacing the Protective Fuse (Drawing 2) The Active Door assembly is equipped with a fuse drawer (B) located on the panel plug of the appliance (A). The fuse drawer houses two 5x20 3.15A fuses, one spare fuse (C) and one working fuse (D). To replace the fuse, proceed as follows: - pull out the mains plug and the socket connecting to the appliance;...

  • Page 12: Technical Data

    These certifications confirm that the ACTIVE DOORS group is designed and manufactured in such a way as to guarantee the highest quality and safety in the transport and storage of perishable food products. Thank you for choosing a MELFORM product! Via Savigliano 34, 12030 Monasterolo di Savigliano (CN) - ITALY Tel.

This manual is also suitable for:

Active door k08c230i

Table of Contents