This combination of symbol and signal words indi- cates a possibly dangerous situation which may lead to death or severe injuries if they are not avoided SSK 2 | Version 2.12...
The respiratory protection protects the respiratory tract against the ingress of dust and small foreign bodies. Safety glasses The protective goggles serve to protect the eyes against parts flying off. Fig. 1: Safety markings on the sandblasting cabinet SSK 2 SSK 2 | Version 2.12...
950 x 660 x 1380 mm Weight (netto/brutto) 48/51 kg 5.1 Type plate Fig. 2: Type plate SSK 2 Transport, packaging, storage Delivery Check the sandblasting cabin for visible transport da- mage after delivery. If you discover any damage, imme- diately report it to the transport company or the dealer.
If such passages are unavoidable, special caution is required. Before starting the transport check the transport route for Fig. 3: Sandblasting cabinet SSK 2 possible danger points, unevenness and disturban-ces 1 Cover with seal and window as well as for sufficient strength and load capacity.
Place the storage grid on the frame.. Then place the filing grid with the frame on the fun- 8.1 Assembly nel. The sandblasting cabinet has to be moounted before commissioning. Fig. 4: Stick on seals SSK 2 | Version 2.12...
/ or you are overtired or suffer from concentration-im- pairing illnesses.. - The sandblasting cabin may only be operated by one person. Other persons must keep away from the work area during operation. SSK 2 | Version 2.12...
10.1 Care by cleaning The sandblasting cabin should always be kept in a clean ATTENTION! condition Never use sand as abrasive. Use protective gloves! ATTENTION! The workpiece must be clean and dry SSK 2 | Version 2.12...
5. Line leaking Pressure drop on the sandblasting 1. Compressed air line clogged or 1. Clean line or replace with larger with insufficient cross section line 2. Compressed air line too long 2. Lay the cable shortern SSK 2 | Version 2.12...
11.1 Decommissioning Example Disused devices must be taken out of service immedi- The gloves for the Sandblasting cabinet SSK 2 must be ately in order to avoid later misuse and endangering the ordered.The gloves are in the spare parts drawing with environment or people.
≤ 16 A per phase and not subject to conditional connection Person responsible for the documentation: Kilian Stürmer, Stürmer Maschinen GmbH, Dr.-Robert-Pfleger-Str. 26, D-96103 Hallstadt Hallstadt, 14.02.2023 ______________________ Kilian Stürmer Manager SSK 2 | Version 2.12...
Diese Informationsbroschüre muss den Schutzhandschuhen (PSA), welche in dieser aufgeführt sind, bei Weitergabe im- mer beigefügt werden. Die Vervielfältigung hierzu ist uneingeschränkt gestattet. This leaflet has to be supplied with every protection glove listed in this brochure. The leaflet can therefore be copied without any restrictions. SSK 2 | Version 2.12...
Need help?
Do you have a question about the SSK 2 and is the answer not in the manual?
Questions and answers