Related Manuals for Miele WEG 885
Summary of Contents for Miele WEG 885
- Page 1 Operating instructions for washing machines To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 12 727 660...
-
Page 2: Table Of Contents
Before using for the first time..................13 Removing the open spanner ..................13 Miele@home ........................14 1. Remove the transit bars..................... 15 2. Setting up Miele@home................... 15 3. Commissioning TwinDos ..................16 4. Starting the calibration programme ................ 17 Washing environmentally and economically ............18 1. - Page 3 Contents Cleaning and care ......................43 Cleaning the external casing and the control panel ..........43 Cleaning the detergent dispenser drawer ..............43 Hygiene info(Cleaning the drum) ................. 45 Cleaning the water inlet filter..................45 TwinDos maintenance ....................46 Problem solving guide....................47 The programme does not start..................
- Page 4 Contents UK Conformity declaration ................... 70 Programmable functions ..................... 71 Opening the programming level ................... 71 Choosing and selecting a programmable function............ 71 Editing and saving a programmable function ............. 71 Exit programming level ....................72 Buzzer duration......................72 Buzzer ........................72 ...
-
Page 5: Correct Application
It must be used only as a domestic appliance to wash items which are specified by the manufacturer as being washable on the wash care label. Miele cannot be held liable for damage resulting from in- correct or improper use or operation. -
Page 6: Technical Safety
Faulty components must only be replaced by genuine Miele ori- ginal spare parts. Only when these parts are fitted can Miele guaran- tee the safety standards of the machine. The electrical socket must be easily accessible after installation so ... - Page 7 Unauthorised repairs could result in unforeseen dangers for the user, for which the manufacturer cannot accept liability. Repairs should only be undertaken by a Miele authorised service technician, otherwise any subsequent damage will not be covered by the war- ranty.
- Page 8 Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the elec- tronic control unit may be impaired at temperatures below freezing point.
-
Page 9: Accessories And Spare Parts
Only use original Miele accessories. If other parts are used, war- ranty, performance and product liability claims will be invalidated. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). -
Page 10: Operating The Washing Machine
Operating the washing machine Control panel a Control field e Indicator lights The control field consists of a time Lights up if there are faults af- display and various sensor controls. fecting the water inlet and The individual sensor controls are ex- drainage. -
Page 11: How The Control Field Works
Operating the washing machine g Time display i Start/Add laundry sensor control After the programme has started, the The programme can be started programme duration will appear in as soon as the sensor control is the display in hours and minutes. flashing on and off. -
Page 12: Caring For The Environment
Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged... -
Page 13: Removing The Open Spanner
Before using for the first time Remove the detergent cart- Damage resulting from incorrect ridges and the drain hose elbow installation and connection. from the drum Installing and connecting the wash- ing machine incorrectly will cause Two detergent cartridges for automatic serious property damage. -
Page 14: Miele@Home
- a WiFi network Therefore, the availability of featured - the Miele@mobile App functions cannot be guaranteed. - a Miele user account. The user ac- Miele@home availability count can be created via the Miele@mobile App. The ability to use the Miele app de-... -
Page 15: Remove The Transit Bars
will appear on the time display. There are 2 ways of connecting: Tip: If the connection has not been set 1. Via the Miele app (default) up when the timeout has finished 2. Via WPS counting down, repeat the process. -
Page 16: Commissioning Twindos
Before using for the first time 3. Commissioning TwinDos The TwinDos system can only be oper- ated with the Miele UltraPhase 1 and UltraPhase 2 detergent cartridges. It is not possible to use any other detergent in the TwinDos system. The dispensing quantities for UltraPhase 1 and UltraPhase 2 are pre-... -
Page 17: Starting The Calibration Programme
Before using for the first time Opening the door at the end of the 4. Starting the calibration pro- programme gramme The door remains locked during the anti- For optimum water and electricity con- crease phase. The control field lights up sumption and excellent wash results, it for the first 10 minutes. -
Page 18: Washing Environmentally And Economically
The ECO 40-60 programme and odours to build up in the washing is more efficient in terms of energy machine. Miele therefore recommends and water consumption but has a cleaning the washing machine once longer running time. -
Page 19: Prepare The Laundry
1. Prepare the laundry Tip: Stains (e.g. blood, egg, coffee, tea) can be pre-treated using some handy tricks which can be found in the Miele guide to laundry care. Damage due to solvent-based cleaning agents Cleaning agents containing benzine, stain remover, etc., can damage... -
Page 20: Select A Programme
Once the programme has started, the washing machine can be operated with the Miele app. You must touch the Start/Add laun- dry sensor control to enable operation via the Miele app. Touching the sensor control also locks the door of the washing machine. -
Page 21: Open The Door
3. Load the washing machine Open the door Close the door Reach under the door grip and pull Make sure that no items are caught the door open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. -
Page 22: Select Programme Settings
4. Select programme settings Selecting a temperature and Selecting Extras spin speed The selection of extras available for the wash programme lights up dimly. The wash programme’s preset temper- ature and spin speed light up brightly. The choice of available temperatures and spin speeds for the wash pro- gramme light up dimmed. -
Page 23: Add Detergent
UltraPhase 1 and UltraPhase 2 single- or TwinDos colours sensor control. use cartridges are available to order Both sensor controls light up dimly and from Miele, your Miele dealer or via the dispensing is deactivated. Miele online shop. Activating TwinDos dispensing TwinDos dispensing is automatically ac- tivated for all programmes in which dis- pensing is possible. -
Page 24: Degree Of Soiling Of The Laundry
5. Add detergent Degree of soiling of the laundry Detergent dispenser drawer Any detergent suitable for automatic There are 3 different degrees of soiling. front loading washing machines can be The quantity of detergent dispensed used. Please observe the instructions via TwinDos and the quantity of water for use and dosage on the detergent required for rinsing are preset for the... - Page 25 5. Add detergent Adding fabric conditioner Tips on dosing Adjust the detergent dosage to the level of soiling of the laundry and the size of the load. Reduce the amount of deter- gent with smaller loads (e.g. reduce the amount of detergent by ⅓ when wash- ing a half load).
-
Page 26: Activating Capdosing
Each capsule contains the correct amount for one wash cycle. Caps are available to order from Miele or from the Miele online shop (see the Open the lid of the / compart- end of this booklet for contact details). -
Page 27: Switching Off/Changing Cap-Dosing
5. Add detergent Switching off/changing Cap- Dosing In order to switch off CapDosing, touch the brightly lit sensor. In order to change CapDosing, touch one of the other capsule sensors. Close the lid and press it firmly shut. ... -
Page 28: Starting The Programme
6. Starting the programme Starting a programme Adding laundry during a pro- gramme sequence (AddLoad) Touch the flashing Start/Add laundry sensor control. Laundry can be added or removed at The door locks and the programme any time, provided that the symbol starts. -
Page 29: End Of Programme
7. End of programme Opening the door and removing Items left in the drum could discolour the laundry other items in the next wash or be- come discoloured themselves. The door remains locked during the anti- Remove all items from the drum. crease phase. -
Page 30: Spinning
Spinning Final spin speed in wash pro- Selecting Rinse hold (final spin) grammes Touch the sensor control (Rinse hold). When a programme is selected, the sensor control for the optimum spin The laundry is not spun after the final speed for that programme will be rinse and remains in the rinse water. -
Page 31: Delay Start/Smartstart
Delay start/SmartStart Starting Delay start Delay start Touch the flashing Start/Add laundry With the Delay start function, you can sensor control. delay the start of the programme. The Delay start process starts and This function is active when the counts down on the time display. - Page 32 Delay start/SmartStart Setting the time period SmartStart If the SmartGrid programming The SmartStart function lets you function is activated, the function of define a time period during which your the sensor control changes. The washing machine will start automatic- time display no longer shows the delay ally based on an external signal.
-
Page 33: Programme Chart
Programme chart ECO 40-60 Max. load 9,0 kg Items For normally soiled cotton garments A laundry load consisting of mixed cottons that are intended for washing at 40 °C or 60 °C can be washed in the same wash cycle. This programme is the most efficient in terms of energy and water consumption for washing cottons. - Page 34 Programme chart MobileStart The Miele app is used for selecting programmes and operating the appliance. QuickPowerWash 60 °C – 40 °C Max. load 4,0 kg Items Lightly to moderately soiled garments which are also suitable for washing in the Cottons programme A special saturation process and wash rhythm ensure that the laun- dry is cleaned particularly quickly and thoroughly.
-
Page 35: Selecting Extra Options
Extra options You can use the extra options buttons to The following extra options can augment the wash programmes. be selected in addition to the programmes Selecting extra options Extra options are selected and deselec- ted using the relevant sensor buttons on the control field. -
Page 36: Programme Sequence
Programme sequence Main wash Rinse Spin Water Wash Water Rinse level rhythm level cycles ECO 40-60 2–3 Cottons Minimum iron Delicates Woollens ... -
Page 37: Special Features In The Programme Sequence
Programme sequence Special features in the pro- = low water level gramme sequence = medium water level Anti-crease: = high water level At the end of the programme, the drum continues to turn at intervals for up to ... -
Page 38: Changing The Programme Sequence
Changing the programme sequence Changing a programme (safety Cancelling a programme lock) You can cancel a programme at any time after it has started. A programme, temperature, spin speed or selected options cannot be changed Turn the programme selector to the once the machine has been successfully position. -
Page 39: Garment Care Label Symbols
Garment care label symbols Washing Drying The figure quoted in the bucket is the Normal temperature maximum temperature at which the Low temperature garment can be washed. Do not tumble dry Normal agitation Reduced agitation Ironing Much reduced agitation ... -
Page 40: Detergent
Detergent The correct detergent Dispensing aids All detergents produced for automatic Use dispensing aids, (e.g. balls) if these washing machines are suitable. Follow are supplied with the detergent, particu- the manufacturer's instructions and larly when using liquid detergent. dosage recommendations on the pack- Refill packs of detergent aging. -
Page 41: Detergent Recommendations (According To Ecodesign No. 2019/2023)
Detergent Detergent recommendations (according to Ecodesign no. 2019/2023) The recommendations apply across the entire temperature range of the wash pro- grammes. ECO 40-60 Cottons Minimum iron Delicates ... -
Page 42: Replacing The Twindos Cartridge
Replacing the TwinDos cartridge 1. The Twin Dos whites sensor control Risk of damage from film seal will flash at the start of the pro- If the film seal is not removed com- gramme to indicate that the cart- pletely, leaks can occur in the ridge for compartment 1 is empty. -
Page 43: Cleaning And Care
Cleaning and care Cleaning the external casing Cleaning the detergent dis- and the control panel penser drawer Washing at low temperatures and the Risk of electric shock! use of liquid detergent can lead to a Mains voltage is present when the build-up of mould and germs in the de- washing machine is switched off tergent drawer. - Page 44 Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thor- oughly after using liquid starch a few times.
-
Page 45: Hygiene Info(Cleaning The Drum)
Cleaning and care Reassemble in reverse order. Hygiene info (Cleaning the drum) Cleaning the filter in the inlet valve Washing at low temperatures and/or us- Using pliers, carefully loosen the ing liquid detergent can cause bacteria ribbed plastic nut on the inlet valve and unpleasant odours to build up in the and unscrew it. -
Page 46: Twindos Maintenance
“TwinDosCare” cleaning cartridge, will flash on the time display. which is available Push the cleaning cartridge into com- from www.shop.miele.com. partment . The washing machine has a cleaning Confirm with the Start/Add laundry programme for the TwinDos system. -
Page 47: Problem Solving Guide
You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. Information to help you rectify faults yourself can be found at www.miele.com/ser- vice. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it. -
Page 48: During The Programme Sequence, A Symbol Appears In The Time Display
Switch the washing machine on again. Restart the programme. If the fault message appears again, contact the Miele Customer Service Department. During the programme sequence, a symbol appears in the time display Message Cause and remedy ... -
Page 49: At The End Of The Programme, An Indicator Light Lights Up In The Control Panel
(see “Installation – Levelling the machine”). Check whether the maximum drainage head height of 1 m has been exceeded. If the fault message appears again, contact the Miele Customer Service Department. The washing machine can still be used, but without the Pre-ironing extra. -
Page 50: Messages Or Faults With The Twindos System
Twin Dos whites or TwinDos colours sensor control was activated. Start another programme with TwinDos dispensing. If detergent is still not dispensed, call the Miele Customer Service Department. A new detergent cart- The washing machine was switched off when the de- ridge has been inserted, tergent cartridge was replaced. - Page 51 Problem solving guide Problem Cause and remedy Strange pump noises This is not a fault. can be heard. These slurping noises occur at the end of the pump sequence as a normal part of operation. Large amounts of deter- The water pressure is too low. gent residue remain in ...
-
Page 52: An Unsatisfactory Wash Result
They do not remove fruit, coffee and tea stains. result. Use the Miele 2 Phase System. The targeted addi- tion of UltraPhase 2 during the wash process re- moves stains effectively. Use a general purpose powder detergent containing a bleaching agent. -
Page 53: The Door Will Not Open
Problem solving guide The door will not open Problem Cause and remedy The door cannot be The drum is locked during a programme. pulled open during a Follow the description in “5. Starting a programme – programme. Adding or removing laundry”. The door will not open The Freshen up programme has been started multiple after the Freshen up pro-... -
Page 54: Opening The Door In The Event Of A Blocked Drain Outlet And/Or Power Cut
Problem solving guide Draining the washing machine Opening the door in the event of a blocked drain outlet and/or Remove the drain filter, though not power cut completely. Switch off the washing machine. Place a suitable container under the access panel, e.g. - Page 55 Problem solving guide Risk of water damage Make sure the drain filters are se- curely tightened. Otherwise there is a risk of water leakage during use. Replace the drain filters correctly and tighten them securely. Close the access panel for the drain pump.
-
Page 56: Service
In the event of any faults which you can- Please note that telephone calls may not remedy yourself, please contact be monitored and recorded for training your Miele dealer or the Miele Cus- purposes. tomer Service Department. EPREL database You can book a Miele Customer Ser-... -
Page 57: Installation
*INSTALLATION* Installation Front view a Water inlet hose (pressure tested to e Detergent dispenser drawer 7000 kPa) f Door b Mains connection cable g Access to filters, pumps and emer- c Flexible drain hose (with detachable gency release swivel elbow) h Access panel for TwinDos cartridges d Control panel i Four height-adjustable feet... -
Page 58: Rear View
*INSTALLATION* Installation Rear view a Drain hose e Water inlet hose (pressure tested to 7000 kPa) b Transport clips for inlet and drain f Safety caps for transit bars hoses and mains connection cable c Mains connection cable g Transport clips for inlet and drain hoses and for storing transit bars d Protruding lid for holding when mov- when not in use... -
Page 59: Installation Surface
(concrete or brick), in order to ensure it cannot fall or slip. Secure the washing machine using a clamp/fastening bracket (MTS floor mounting kit – available from your Miele dealer or Miele spare parts de- partment). -
Page 60: Removing The Transit Bars
*INSTALLATION* Installation Removing the right-hand transit bar Removing the transit bars Removing the left-hand transit bar Push the cover out and turn the left- hand transit bar 90° using the span- Push the cover out and turn the left- ner supplied. -
Page 61: Fitting The Transit Bars
*INSTALLATION* Installation Covering holes Risk of damage from incorrect transport. Risk of injury from sharp edges. The washing machine may become There is a risk of injury from reaching damaged if moved without the transit into holes that are not covered. bars in place. -
Page 62: Levelling The Machine
*INSTALLATION* Installation Levelling the machine The washing machine must stand per- fectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase elec- tricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine. -
Page 63: Installing Under A Continuous Worktop
Washer-dryer stack The washing machine can be combined Risk of electric shock due to ex- with a Miele tumble dryer in a washer- posed cables dryer stack. The appropriate “WTV” There is a risk of coming into contact stacking kit* to match your dryer is re- with live parts while the lid is re- quired. -
Page 64: The Water Protection System
Maintenance the excess water away. Only use a genuine Miele hose that has been pressure tested to withstand at Drain hose least 7,000 kPa should you ever need a The drain hose is protected by a ventila- replacement. -
Page 65: Water Drainage
If required, the hose can be extended to with plastic nipple. a length of up to 5 m. Accessories are available from your Miele dealer or from the Miele Customer Service Depart- ment. For drain heights of more than 1 m (up to a maximum delivery head of 1.8 m), a... -
Page 66: Fitting The Elbow
*INSTALLATION* Installation Fitting the elbow Direct connection to a sink drain out- Use the elbow supplied to stop the drain hose from slipping. a Adapter Attach the elbow to the drain b Spigot nut hose . c Hose clip d End of the hose ... -
Page 67: Electrical Connection
Miele product must also be maintained Risk of fire from overheating. in isolated operation or in operation that... -
Page 68: Consumption Data
Consumption data... -
Page 69: Technical Data
Maximum transmission power < 100 mW EU Conformity declaration Miele hereby declares that this washing machine complies with Directive 2014/53/ The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.ie - For service, information, operating instructions etc: go to https://miele.co.uk/... -
Page 70: Conformity Declaration
Technical data UK Conformity declaration Miele hereby declares that this washing machine complies with UK Radio Equip- ment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk... -
Page 71: Programmable Functions
Programmable functions Programmable functions The programmable functions are used to alter the washing machine’s elec- Buzzer duration tronics to suit changing requirements. Buzzer Programmable functions can be Keypad tone altered at any time. PIN code Opening the programming level Control field switch-off behaviour ... -
Page 72: Exit Programming Level
Programmable functions Touch the or sensor control to Buzzer duration switch the programmable function The buzzer sounds to let you that it is on/off or to select an option: the end of the programme. You can de- Programmable function cide how long the buzzer should sound Available options for. -
Page 73: Lock Code
Programmable functions Lock code Control panel switch-off status The lock code prevents the washing machine being used without your To save energy the time display and knowledge. sensors will go out after 10 minutes, and only the Start/Add laundry sensor When the code has been activated, you will flash slowly. -
Page 74: Longer Pre-Wash Cottons
The boiling point for water is lower at Suds cooling should be activated: high altitudes. In order to avoid water boiling, Miele recommend activating - to prevent the danger of scalding if the the reduce temperature setting at alti- drain hose is hooked over the edge of tudes of more than 2000 m above sea... -
Page 75: Low Water Pressure
Programmable functions Low water pressure = Darkest level If the water pressure is below 100 kPa = Lightest level (1 bar), the washing machine cancels the programme and the fault mes- TwinDos sage appears. You can switch TwinDos on or off. The If the water pressure cannot be in- Twin Dos whites or TwinDos colours creased, activating this function will pre-... -
Page 76: Twindos Maintenance
Options The , and programmable = light functions are only displayed if the re- = normal quirements for using Miele@home have been met (see the “Before using = heavy for the first time” chapter, “Miele@home” section). -
Page 77: Remote Control
Use the sensor control to set a Remote control SmartStart time period. The washing You can use the Miele app to check machine will then start within the time the status of your washing machine period specified by you when it receives from anywhere and start it remotely. - Page 78 Otherwise, the update will be aborted and will not be installed. - Some software updates can only be carried out by the Miele Customer Service Department. Starting the update After the washing machine is switched on, appears on the time display.
-
Page 79: Switching Off Wifi
The copyrights held appears on the time display. by Miele and third parties must be re- - The WiFi is switched off. spected. - The WiFi connection will be reset to Furthermore, this communication mod- the factory default setting. -
Page 80: Detergents And Care Products
These specialist detergents are available available for this washing machine. All as convenient single-use capsules. products have been designed for Miele washing machines. Caps Sport These and many other products can be - For synthetic fabrics ordered from www.shop.miele.com, the... -
Page 81: Fabric Care
Detergents and care products Fabric care Machine care These fabric care products are available TwinDosCare as convenient single-use capsules. - Cleaning agent for the TwinDos dis- pensing system Fabric conditioner cap - Use before a prolonged downtime (at - Fabric conditioner for freshly scented least 2 months) laundry - Use before changing to a different... - Page 83 United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk, E-mail: info@miele.co.uk Australia Ireland South Africa Miele Australia Pty. Ltd. Miele Ireland Ltd. Miele (Pty) Ltd. ACN 005 635 398 2024 Bianconi Avenue...
- Page 84 WEG 885 en-GB M.-Nr. 12 727 660 / 00...
Need help?
Do you have a question about the WEG 885 and is the answer not in the manual?
Questions and answers