Table 11-1
Security Features Overview (continued)
Password Options
(This selection appears
only if a power-on
password or setup
password is set.)
Smart Cover (some
models)
Device Security
LoJack for HP
ProtectTools
24
Chapter 11 Asset Tracking and Security
Allows you to:
●
Lock legacy resources (appears if a setup password is set)
●
Enable/disable network server mode (appears if a power-on password is set)
●
Specify whether the password is required for warm boot (Ctrl+Alt+Delete) (appears if a power-
on password is set)
●
Enable/Disable Setup Browse Mode (appears if a setup password is set) (allows viewing, but
not changing, the F10 Setup Options without entering setup password)
●
Enable/disable Stringent Password (appears if a power-on password is set), which when
enabled bypasses the onboard password jumper to disable the power-on password
See the Desktop Management Guide for more information.
Allows you to:
●
Lock/unlock the Cover Lock.
●
Set the Cover Removal Sensor to Disable/Notify User/Setup Password.
NOTE:
Notify User alerts the user that the sensor has detected that the cover has been removed.
Setup Password requires that the setup password be entered to boot the computer if the sensor
detects that the cover has been removed.
This feature is supported on some models only.
Allows you to set Device Available/Device Hidden for:
●
Serial ports
●
Parallel port
●
Rear USB ports
●
Front USB ports
●
Internal USB ports
●
System audio
●
Network controllers (some models)
●
Legacy diskette
●
Embedded security device (some models)
●
SATA0
●
SATA1 (some models)
●
SATA2 (some models)
●
SATA3 (some models)
●
eSATA (some models)
Allows you to remotely monitor, manage, and track your computer.
Once activated, LoJack Pro for HP ProtectTools is configured from the Absolute Software Customer
Center. From the Customer Center, the administrator can configure LoJack for HP ProtectTools to
monitor or manage the computer. If the system is misplaced or stolen, the Customer Center can
assist local authorities to locate and recover the computer. If configured, LoJack Pro can continue
to function even if the hard drive is erased or replaced.
ENWW