Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Sea&Sea LX
- Page 1 取扱説明書 Instruction Manual...
- Page 2 Loosen a cable fixing knob and insert the cut-off side of the optical cable in the hole of the cable plug mouth. Tighten the cable fixing knob to secure the cable. Insert the plug of the optical cable in the remote control connector of the light.
- Page 3 About the "Memory function*" of the LX Light *The LX Light memorizes the light output setting when the power is turned off and emits the same light output when the light is turned back on. If you turn off the light by the remote controller before LCD display indication changes to "Remaining light time" from "Remaining battery”, the light does not memorize the light output setting when the light turned off.
- Page 4 Submerge the body into fresh water for about 10-20 minutes after use. While submerged, press the Brightness adjustment buttons, Start/Phase button and Selector several times and wash off any residual salt around buttons. After removing from freshwater, rinse with slow flowing running water. Never use high-pressure water from one direction as it may cause water intrusion.
Need help?
Do you have a question about the LX and is the answer not in the manual?
Questions and answers