Sealey CD2013TT.V4 Manual page 3

WARNING! DO NOT touch the top of the heater when in use as it becomes hot.
‰
5.6. SAFETY CUT OUT FEATURE
5.6.1. The heater is fitted with a thermostatic safety cut out which will turn the heater off automatically should the airflow become blocked or if
the heater has a technical malfunction. If this happen, switch the heater off and unplug it from the mains power supply.
WARNING! In such a case, the heater will be very hot.
‰
DO NOT connect the heater to the power supply again until the reason the safety cutout activation has been identified.
8
Allow the heater to cool completely before handling and then check the air inlet and outlet for obstructions before attempting to switch
the unit back on.
If the cause is not obvious, return the heater to your local Sealey stockist for servicing.
6. MAINTENANCE
WARNING! Before attempting any maintenance ensure the unit is unplugged from the mains power supply and that it is cool.
‰
6.1. Clean the unit with a soft dry cloth. DO NOT use abrasives or solvents.
6.2. Periodically check the air inlet and outlet, clean with a soft brush, to ensure the air way is clear.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way.
Contact your local solid waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
CD2013TT.V4 Issue 3 08/07/24
REGISTER YOUR
PURCHASE HERE