Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Acer UM.QB7EE.302
Summary of Contents for Acer UM.QB7EE.302
- Page 1 Acer LCD Monitor User Guide...
- Page 2 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies.
-
Page 3: Information For Your Safety And Comfort
Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Acer monitor is purposed for video and visual display of information obtained from electronic devices. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. -
Page 4: Accessibility
Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. -
Page 5: Product Servicing
• If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. -
Page 6: Potentially Explosive Environments
We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products. -
Page 7: Disposal Instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit https://www.acer-group.com/sustainability/en/our- products-environment.html LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. -
Page 8: Taking Care Of Your Vision
Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •... - Page 9 (“x” = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized...
-
Page 10: Federal Communications Commission Supplier's Declaration Of Conformity
Acer America Corporation 333 West San Carlos St., San Jose Suite 1500 CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Supplier's Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following... - Page 11 ENERGY STAR® Acer’s ENERGY STAR qualified products save you money by reducing energy costs and helps protect the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark. What is ENERGY STAR?
-
Page 12: Tco Certified
TCO Certified... -
Page 13: Table Of Contents
Information for your safety and comfort Safety instructions Special notes on LCD monitors Cleaning your monitor Accessibility Safe listening Warnings Using electrical power Product servicing Potentially explosive environments Additional safety information IT Equipment Recycling Information Disposal instructions LCD pixel statement Tips and information for comfortable use Finding your comfort zone Taking care of your vision... -
Page 14: Unpacking
Unpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide *HDMI Cable *DP Cable *AC Power cord (Optional) (Optional) -
Page 15: Screen Position Adjustment
SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor. • Attaching the Base Note: Remove the monitor and monitor base from its packaging.Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. •... -
Page 16: Monitor Pivot
• Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. 150mm • Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. • Monitor Pivot Before rotating the display,lift it to the top position and then push it back to the utmost degree. -
Page 17: Connecting The Power Cord
Connecting the Power cord • Check first to make sure that the power cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area. -
Page 18: Display Data Channel (Ddc)
Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. -
Page 19: 24-Pin Usb 3.1 Type C Cable
Lane3(n) Config1 Config2 AUX_CH (n) AUX_CH (p) Hot Plug Detect DP Power_Return DP Power * only for certain models 24-pin USB 3.1 Type C cable PIN No. Signal Assignment PIN No. Signal Assignment SSTXp1 SSTXp1 SSTXn1 SSTXn1 VBUS VBUS SBU1 SBU1 VBUS VBUS... -
Page 20: Standard Timing Table
Standard timing table VESA MODE MODE Resolution 640x480@60Hz 640x480@67Hz SVGA 800x600@56Hz SVGA 800x600@60Hz 1024x768@60Hz 1024x768@70Hz 1152x864@75Hz 1280x720@60HZ SXGA 1280X1024@60Hz WXGA 1280x800@60HZ WXGA+ 1440x900@60Hz WSXGA+ 1680X1050@60Hz 1920x1080@60Hz 1920x1080@75Hz 1920x1080@100Hz... -
Page 21: Installation
*For the installation of replaceable parts, please refer to the above installation instructions. *Users may go to the local service network to replace /purchase the qualified replaceable parts. For local service centers and service contacts, please refer to https://www.acer.com/ac/en/US/content/ support... -
Page 22: Daisy-Chain Function
Daisy-chain function DP OUT... -
Page 23: User Controls
User Controls External controls Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby, power saving and OSD locked. Function key Press to view Main page. Press again to enter hotkey1 function. When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults. -
Page 24: Using The Shortcut Menu
Using the Shortcut Menu ------------------------------------------------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality and general settings. -
Page 25: Selecting The Input
Selecting the input Open the Input control and select HDMI, DP, DP ALT or Auto Source. When you are done, press the joystick to exit current page and store. Input Input HDMI Auto Source Move Exit The Function page Open the Function page to adjust the functions, settings which you want using the arrows. When you are done, toggle the joystick to the left or right to go back one level or use to exit current page and store. - Page 26 Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the brightness without changing lighter shades. Low Blue Light: The display uses the low blue light panel. It complies with TÜV Rheinland Low Blue Light Hardware Solution certification under factory reset/default setting (Low Blue Light=Standard, Brightness: 70%, Contrast: 50%, CCT: Warm).
- Page 27 Color Press the MENU key to open the OSD. Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. Toggle to the left or right to adjust the sliding scales or choose functions.
- Page 28 • CIE 1931 positive and negative error of 0.05, ("HDR" according to current Panel to fine-tune). • N/ A means to follow the current parameter value (Ex. Low Blue Light parameter value). • Color Space= HDR, the Modes= HDR, Picture page HDR =Auto. •...
- Page 29 Audio Press the MENU key to open the OSD. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. Toggle to the left or right to adjust the sliding scales or choose functions.
- Page 30 The Performance Page can be used to adjust the Over Drive, AMD FreeSync, Refresh Rate Num, VRB. Over Drive: Select Off, Normal or Extreme. AMD FreeSync:To choose AMD FreeSync on/off. Refresh rate num: Display the panel’s current refresh rate on the screen. ----------------------------------------------------------------------------------------------------------- Note: If AMD FreeSync...
- Page 31 OSD timeout: Adjust the delay before turning off the OSD menu. Transparency: Select the transparency when using gaming mode. The transparency can be 0% (OFF), 20%, 40%, 60%, or 80%. OSD Lock:To choose OSD lock on/off. --------------------------------------------------------------------------------------------------------- Note: OSD Locked: •...
- Page 32 System Press the MENU key to open the OSD. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. Toggle to the left or right to choose functions.
- Page 33 • Hot Key 1 default is (Modes), Hot Key 2 default is (Brightness). • Because some functions limit the Hot Key to be gray out and unavailable. • Hot Key can define of: (Modes, Brightness, Volume, Gamma, Contrast, Low Blue Light, Over Drive, VRB, USB Port Select). 10.
- Page 34 Setting the KVM You can follow below instruction to set up KVM for your monitor: • Connect Type-C/USB-B to your computer • Select Type-C/USB-B of USB Port Select in the OSD • Suggest setup:...
-
Page 35: Save Setting To...(User Mode Only)
DP/HDMI to PC Type-C to laptop USB-B to PC USB-A to keyboard/mouse HDMI1 HDMI2 DP IN Type-C ----------------------------------------------------------------------------------------------------------- Note: • When connecting two computers to the monitor, configure the USB settings from the OSD menu to share a single set of keyboard and mouse connected to the monitor between two computers. -
Page 36: Troubleshooting
Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. DP/HDMI Mode (Optional) Problem LED status Remedy No picture visible Blue Using the OSD menu, adjust brightness and contrast to maximum or reset to their default setting. - Page 37 Product Information for EU Energy...
Need help?
Do you have a question about the UM.QB7EE.302 and is the answer not in the manual?
Questions and answers