KMART SLR-19024 Quick Start Manual

IMPORTANT SAFETY INSTRUCTIONS:
The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It is
important to read all of these instructions carefully before using the product, and to save them for future reference or new
users.
1. This product must only be used as intended in accordance with the enclosed operating instructions.
2. Do not carry the appliance by the mains cable or pull the cable to remove the plug from the socket.
3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
4. If the appliance stops unexpectedly or appears to malfunction, switch off the power supply, unplug from the mains and stop using
immediately.Seek professional advice to rectify the fault or make repairs.
5. Switch off the power supply or unplug from the mains socket when not in use, before cleaning or changing accessories.
6. Avoid positioning the appliance where the power cable might be accidentally trapped or damaged.
7. Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause damage.
8. Ensure the appliance is switched OFF before connecting the mains power supply.
9. Be aware that some surfaces may become hot. Do not touch hot surfaces and supervise others accordingly.
10. This product has not been designed for use by children.
11. Children should be closely supervised at all times when they are near any electrical appliance.
12. To protect against electric shock, never allow the appliance, the mains cable or plug to come into contact with water or any other
liquid.
13. Never reach for any appliance that has fallen into water. Switch off the power supply at the mains immediately and unplug. Do
not re-use until the product has been inspected and approved by a qualified electrician.
14. Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and mains supply
connections.
15. To disconnect, first ensure that all controls are in the OFF position, then remove the plug from the electricity supply.
16. Where relevant keep all ventilation slots, filters, etc. uncovered and clear of debris. Never drop or insert objects into the openings.
17. Do not use outdoors. This appliance has been designed for domestic indoors use only.
18. Replace any cracked protective shield.
19. The external flexible cable or cord of this luminaire cannon be replaced; if the cord is damaged, the luminaire shall be destroyed.
WARNING: SALT LAMPS HAVE A TENDENCY FOR THE ENCLOSURE OR SHADE TO
ABSORB MOISTURE FROM THE AIR. SATURATION OF THE ENCLOSURE OR SHADE
MAY RESULT IN WATER ACCUMULATING AT THE BASE OR NEAR THE LAMP.
USE AND STORE THE SALT LAMP ON SUITABLE WATER-RESISTANT SURFACES.
ENSURE THE LAMP IS CHECKED REGULARLY FOR ANY ACCUMULATED WATER
AND CLEAN UP IMMEDIATELY. ACCUMULATED WATER MAY CAUSE DAMAGE TO
FURNITURE AND OTHER PROPERTY.
WARNING: DO NOT PLACE THE SALT LAMP IN SUCH A WAY ANY ACCUMULATED
WATER MAY TRACK ALONG THE FLEXIBLE CORD TO THE CONNECTION OF THE
POWER SUPPLY.
WARNING: PLACE THE POWER SUPPLY SUFFICIENTLY AWAY FROM THE BASE
OF THE LAMP SO THAT IT IS NOT EXPOSED TO THE ACCUMULATION OF WATER.
WARNING: SALT LAMPS SHALL ONLY BE USED WITH THE POWER SUPPLY UNIT
PROVIDED WITH THE SALT LAMP.
Product specification
LED bulb rating: 14 pcs warm white LEDs 1.2W (non-replaceable)
LED model no.: 2835
INSTRUCTIONS FOR ASSEMBLY
1. Insert the adaptor plug into the socket.
2. Switch on.
MAINTENANCE METHOD
1. Salt lamp can absorb moisture from the air. Please don't place the salt lamp washing
or in outdoor.
2. In case of special wet weather, using plastic bag to pack it up or continue lighting to
keep dry.
3. If you don't use it for a long time, seal it in a plastic bag and keep it in a dry place.
K: 42796220
SALT LAMP
SLR-19024
T: 68747862