Compaq 108164-003 - ProLiant - 800 Integration Notes page 34

PCI Bus Numbering in a Microsoft Windows NT Environment
Figure 10. NICs in configuration c – test 2 before being reconfigured
Uninstalling and/or Installing a Standalone Controller
Here are the steps to follow to install and uninstall controllers. To install and uninstall network
controllers that are configured as standalone, follow these steps:
Uninstalling a Controller:
1. Double click Start
2. Select the Compaq Network icon to launch the Network Teaming and Configuration Utility.
a. Highlight the controller that did not load (no other controllers should be selected).
b. Click the Uninstall option.
3. Select the Close button when finished.
This will immediately uninstall the controller (i.e., remove its entries from the registry). The
driver for this adapter will not be removed from memory until the system is restarted.
Installing a Controller:
1. Double-click Start
a. Highlight the uninstalled controller you want to install (no other controllers should be
selected).
b. Select the Install option.
2. Select the Close button when finished.
Once the installation completes, the controller turns yellow. This indicates that the registry
contains the controller, but the driver is not currently loaded in memory (the driver loads the next
time the system restarts). All installed controllers have a number in brackets next to their name.
This is the network card number for that driver instance. You must restart the server for the
changes to take effect.
13UK-1200A-WWEN
Settings Control Panel.
Settings Control Panel.
34