DOTWORKZ DomeWizardPro Setup Manual

Included in DomeWizardPRO
1. Extendable Pole
2. Cleaning Head w/ Washable Mitt
1 2
PLEASE READ CAREFULLY BEFORE USING!
4-In-1 Cleaning - How to choose the right mode?
• Mode 1: Designed for large dome PTZ cameras, sensor covers, and other rounded surfaces. This mode ensures thorough
and efficient cleaning of these components without the need for ladders or lifts.
• Mode 2: Shortens and collapses the cleaning mitt to form tightly around smaller mini domes, smoke sensors, LED lights, and
beam detectors. This mode ensures precise and effective cleaning of these smaller, more delicate surfaces.
• Mode 3: Extends the cleaning mitt past the top of the internal head. This transforms the mitt into a versatile tool for cleaning
flat surfaces such as flat lenses, monitors, multi-sensor cameras, signal lights, lasers, signs, medical devices, and more.
• Mode 4: Add a heavy-duty cleaning cloth to tackle tough cleaning tasks. This mode is ideal for removing heavy dirt, debris,
and buildup from camera surfaces before using the primary cleaning mitt.
3. Grub Screw
4. Pro-Clean Solution
ASSEMBLY REQUIRED
3
1. Always check for and avoid overhead hazards before use
2. Do not over tighten screws or bolts, as this may damage the pole and compromise the integrity
3. Apply Pro-Clean solution to mitt or towel before extending pole
4. Close blue pole latches completely to avoid pole collapse when in use
5. Retract and extend pole only when pole is vertical for best result
6. Always cover your DomeWizard with the included bag when not in use
ELEVATED MULTIMODE CLEANING SYSTEM
5. 3 Cleaning Mitts and 1 Washable Cloth
6. Mesh Storage Bag
4 5
TM
6